Changes between Version 3 and Version 4 of TBR/UserManual/FlashLinker


Ignore:
Timestamp:
Sep 17, 2005, 5:51:41 PM (14 years ago)
Author:
MarkkuPuro
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • TBR/UserManual/FlashLinker

    v3 v4  
    55
    66GBA Flash Linkers (also know as Flash Writers) are devices that are used for:
    7  * Backuping Programs from cartridges.
    8 Reading out program data and storing it on PC as GBA ROMS
    9  * Backuping savegames (Cards SRAM)
    10 Reading out savegame states and storing it on PC as .SAV files
     7 * Backuping Programs from cartridges. Reading out program data and storing it on PC as GBA ROMS
     8 * Backuping savegames (Cards SRAM) Reading out savegame states and storing it on PC as .SAV files
    119 * Writing GBA roms to Gameboy Flash Cards
    1210 * Writing / Restoring Programs to/from Flash Cards
     11= EZ-Flash Advance USB = (http://www.gba-toys.com/Default.aspx?tabid=40)
     12 * EZFlash Advance Linker/ Cable connects to PC USB port. USB 1.1 and v 2.0 are supported. Connects directly to the GAMEBOY ADVANCE & GBA SP Link Port. Writer is small and lightweight, and no other power source is required - USB port powers the unit.
     13 * Can upload small roms and applications direcly to the Gameboy VRAM. This feture anables you to run small roms without a gba fash card! (ie. multiboot mode).
     14= Connecting to GBA =
    1315
    14 ----
    15 
    16 EZ-Flash Advance USB (http://www.gba-toys.com/Default.aspx?tabid=40)
    17  * EZFlash Advance Linker/ Cable connects to PC USB port. USB 1.1 and v 2.0 are supported.
    18 Connects directly to the GAMEBOY ADVANCE & GBA SP Link Port.
    19 Writer is small and lightweight, and no other power source is required - USB port powers the unit.
    20  * Can upload small roms and applications direcly to the Gameboy VRAM.
    21 This feture anables you to run small roms without a gba fash card! (ie. multiboot mode).
    22 
    23 Connecting to GBA
    24  * Insert your EZFA cartridge into your GBA, and plug the cable into your GBA too, run the client software,
    25 then press the select and start buttons of GBA simultaneously and turn it on, if all the steps are done properly,
    26 the client should be connected to your GBA, then you can operate your cart via the client software.
     16 * Insert your EZFA cartridge into your GBA, and plug the cable into your GBA too, run the client software, then press the select and start buttons of GBA simultaneously and turn it on, if all the steps are done properly, the client should be connected to your GBA, then you can operate your cart via the client software.