- Timestamp:
-
01/26/07 16:33:45 (17 years ago)
- Author:
-
Logiclabsrl
- Comment:
-
Legend:
- Unmodified
- Added
- Removed
- Modified
-
v6
|
v7
|
|
1 | 1 | = Fault Recorder = |
2 | 2 | |
3 | | |
4 | | = Techinical information = |
| 3 | = '''Techinical information''' = |
5 | 4 | |
6 | 5 | |
… |
… |
|
74 | 73 | |
75 | 74 | 8 isolated noise-free channels |
| 75 | |
76 | 76 | Isolation on single channel at 3000V DC (1 min) |
| 77 | |
77 | 78 | Sampling frequency: 7,2 KHz |
| 79 | |
78 | 80 | Bandwidth (-3 dB): DC (0 Hz) ÷ 3,5 KHz |
| 81 | |
79 | 82 | Flat band (±0,005 dB): DC (0 Hz) ÷ 3,25 KHz |
| 83 | |
80 | 84 | Stop band attenuation: >100 dB |
| 85 | |
81 | 86 | Full-scale (Pn): 100Vrms / 200Vrms / 700Vrms |
| 87 | |
82 | 88 | Field of measure: |
| 89 | |
83 | 90 | 14 mVrms ÷ 100 Vrms @ Pn=100 Vrms |
| 91 | |
84 | 92 | 28 mVrms ÷ 200 Vrms @ Pn=200 Vrms |
| 93 | |
85 | 94 | 0,1 Vrms ÷ 700 Vrms @ Pn=700 Vrms |
| 95 | |
86 | 96 | Full-scale setup by software command |
| 97 | |
87 | 98 | Point error: < 0,5% |
| 99 | |
88 | 100 | Input impedance: 330 kohm (purely resistive) |
| 101 | |
89 | 102 | Absorbed power: 480 mVA @ 400V |
| 103 | |
90 | 104 | Resolution (ENOB): 16 bit noise-free |
| 105 | |
91 | 106 | signal-noise ratio: 92 dB |
| 107 | |
92 | 108 | Cross-over: <-86 dB |
93 | | = '''Digital inputs''' = |
94 | | |
| 109 | |
| 110 | ---- |
| 111 | |
| 112 | '''Digital inputs''' |
95 | 113 | |
96 | 114 | 128 isolated channels |
| 115 | |
97 | 116 | Isolation on single channel at 3000V DC (1 min) |
| 117 | |
98 | 118 | Input voltage (min): 18V |
| 119 | |
99 | 120 | Input voltage (max): 140V |
| 121 | |
100 | 122 | Time resolution: 1 ms |
101 | 123 | |
102 | | = '''Communication''' = |
103 | | |
104 | | |
105 | | Ethernet 10/100 Mbit/ses |
| 124 | ---- |
| 125 | |
| 126 | '''Communication''' |
| 127 | |
| 128 | Ethernet 10/100 Mbit/s |
| 129 | |
106 | 130 | Configurable as knot of a net LAN/WAN |
| 131 | |
107 | 132 | 1 RS232 (19.200 fixed bauds) – frontal side |
| 133 | |
108 | 134 | 1 RS232 (until 115.200 bauds) – back side |
| 135 | |
109 | 136 | Remote connection with analog modem |
| 137 | |
110 | 138 | 3 RS232 for custom applications |
| 139 | |
111 | 140 | Isolated communication ports |
| 141 | |
112 | 142 | (Ethernet: 1500 Vrms Serials: 2500 Vrms) |
| 143 | |
113 | 144 | Connector for satellite antenna |
114 | | = '''Signal relay''' = |
115 | | |
| 145 | |
| 146 | ---- |
| 147 | |
| 148 | '''Signal relay''' |
116 | 149 | |
117 | 150 | Out of order |
| 151 | |
118 | 152 | Recording in progress |
119 | 153 | |
120 | | |
121 | | = '''Elaboration''' = |
122 | | |
| 154 | ---- |
| 155 | |
| 156 | '''Elaboration''' |
123 | 157 | |
124 | 158 | 32 bit multiprocessor (4 ColdFire MCF5272processor) system |
| 159 | |
125 | 160 | Realtime operating system RTEMS |
| 161 | |
126 | 162 | 32 MByte Flash memory |
| 163 | |
127 | 164 | 128 Mbyte DRAM |
| 165 | |
128 | 166 | RTC with GPS synchronization |
129 | 167 | |
130 | | = '''Fault Recording''' = |
131 | | |
| 168 | ---- |
| 169 | |
| 170 | '''Fault Recording''' |
132 | 171 | |
133 | 172 | Recording in flash memory |
| 173 | |
134 | 174 | Recording maximum time: 250 s |
| 175 | |
135 | 176 | Maximum number of recordings: 180 |
| 177 | |
136 | 178 | Pre-fault time: 50 ms ÷ 1 s |
| 179 | |
137 | 180 | Fault time: 100 ms ÷ 60 ses |
| 181 | |
138 | 182 | Post-fault time: 100 ms ÷ 1 s |
| 183 | |
139 | 184 | Possibility of prolongation recording |
| 185 | |
140 | 186 | Maximum duration recording: 150 s |
| 187 | |
141 | 188 | Analog Trigger on threshold (max, min, gradient) |
| 189 | |
142 | 190 | Trigger on digital transitions |
| 191 | |
143 | 192 | Time tag events |
144 | | Precision: 1 µs (1pps GPS) |
145 | | Resolution: 1 ms |
146 | | |
147 | | = '''Normative conformity''' = |
148 | | |
| 193 | |
| 194 | Precision: 1 µs (1pps GPS) |
| 195 | |
| 196 | Resolution: 1 ms |
| 197 | |
| 198 | ---- |
| 199 | |
| 200 | '''Normative conformity''' |
149 | 201 | |
150 | 202 | IEC 61000 – 4 – 2 (Level 3) |
| 203 | |
151 | 204 | IEC 61000 – 4 – 3 (Level 3) |
| 205 | |
152 | 206 | IEC 61000 – 4 – 4 (Level 3) |
| 207 | |
153 | 208 | IEC 61000 – 4 – 5 (Level 4) |
| 209 | |
154 | 210 | IEC 61000 – 4 – 6 (Level 3) |
| 211 | |
155 | 212 | IEC 61000 – 4 – 8 (Level 5) |
| 213 | |
156 | 214 | IEC 61000 – 4 – 10 (Level 3) |
| 215 | |
157 | 216 | IEC 61000 – 4 – 12 (Level 3) |
| 217 | |
158 | 218 | IEC 61000 – 4 – 16 (Level 4) |
| 219 | |
159 | 220 | IEC 61000 – 4 – 17 (Level 3) |
| 221 | |
160 | 222 | IEC 61000 – 4 – 29 (Level 3) |
| 223 | |
161 | 224 | ENEL DV1047A2-NC |
| 225 | |
162 | 226 | ENEL REMC01 |
| 227 | |
163 | 228 | ENEL REMC02 |
| 229 | |
164 | 230 | ENEL RMEC01 |
| 231 | |
165 | 232 | ENEL RCLI01 |
| 233 | |
166 | 234 | ENEL LV27 |
| 235 | |
167 | 236 | ENEL LV29 |
| 237 | |
168 | 238 | ENEL DV1500 |
| 239 | |
169 | 240 | ENEL DV1501 A |
| 241 | |
170 | 242 | ENEL DN7600 |
| 243 | |
171 | 244 | CEI 45-5 |
| 245 | |
172 | 246 | CEI 70-1 IP30 (front) IP20 (case) |
| 247 | |
173 | 248 | COMTRADE standard IEEE Std C37.111-1991 |
| 249 | |
| 250 | |
| 251 | = Firmware Architecture = |
| 252 | |
| 253 | |
| 254 | ''In progress...'' |