Changes between Initial Version and Version 1 of TBR/UserApp/Automatic_Load_Shed


Ignore:
Timestamp:
01/19/09 15:25:34 (15 years ago)
Author:
Logiclab
Comment:

New page: LogicLab? RTEMS-base Automatic Load Shed ==Hardware technical data== ===Power Supply=== Power supply voltage: 110V DC ± 20% *Medium power: 20W *Voltage dips and short interruptions :Ins...

Legend:

Unmodified
Added
Removed
Modified

  • TBR/UserApp/Automatic_Load_Shed

    v1 v1  
     1= Automatic Load Shed =
     2
     3
     4LogicLab RTEMS-base Automatic Load Shed
     5= Hardware technical data =
     6
     7= Power Supply =
     8
     9
     10Power supply voltage: 110V DC ± 20%
     11 * Medium power: 20W
     12 * Voltage dips and short interruptions
     13 Insensitive to 100% of Vaux for 50 ms (min)
     14 Insensitive to 50% of Vaux for 100ms (min)
     15= Dimensions =
     16
     17 * Height: 3U
     18 * Width: 19”
     19 * Depth: 34cm
     20= Voltage inputs =
     21
     22 * 4 isolated voltage input channels
     23  * 6 inputs on 3 voltage channels with fullscale 100V (M2)
     24  * 1 inputs on 1 voltage channel with fullscale 400V (M1)
     25 * Dielectric strength 3000V DC (1 min)
     26 * Rated Voltage (Vn) M1:     
     27 57Vrms
     28 100Vrms
     29 400Vrms
     30 * Rated Voltage (Vn) M2:
     31 57Vrms
     32 100Vrms
     33 * Operating range: 0.01 ÷ 1.6 Vn
     34 * Rated voltage selection (Vn): software
     35 * Frequency Range: 10 ÷ 130 Hz
     36 * Permanent overload capability: 1.5 Vn
     37 * Transient overload capability - not measurable(<10s): 2Vn
     38 * Power dissipation:     
     39 <1VA @Vn = 400V
     40 <0,1VA @Vn = 100V
     41 * Accuracy:
     42  * RMS value: ±0,001 Vn
     43  * Voltage rate: ±0,002 Vn/S
     44  * Frequency:   ±0,002 Hz @ Vn
     45  * 0,01 Hz @ V>0,3VnVn
     46  * 0,02 Hz @ V<0,3Vn
     47  * Frequency rate: ±0,002 Hz/s
     48= Alarms (digital outputs)***
     49 * 15 Relays
     50  * Out of order
     51  * 81/81R Threshold 1
     52  * 81/81R Threshold 2
     53  * 81/81R Threshold 3
     54  * 81/81R Threshold 4
     55  * 27/59/27R Threshold 1
     56  * 27/59/27R Threshold 2
     57  * Stop threshold Min/Max voltage and/or voltage imbalance
     58  * Stop threshold maximum frequency difference
     59  * 27/59/27R/81/81R Threshold 1
     60  * 27/59/27R/81/81R Threshold 2
     61  * 81/81R Threshold 3 and/or 4
     62  * General alarm
     63  * Relay available on connector C1
     64  * Relay available on connector C2
     65 * Dielectric strength 3300V DC (1 min)
     66 * Rated voltage: 110V
     67 * Rated current: 5A
     68 * Maximum Switching Capacity (L/R=40ms): 0,5A @110V
     69 * Endurance (mechanical): ?10e7
     70
     71 =Digital inputs===
     72
     73 * 2 isolated inputs
     74  * Input signal close status HV switch (Red line)
     75  * Input signal close status HV switch (Green line)
     76 * Dielectric strength 33000V DC (1 min)
     77 * Threshold voltage: 60V ± 10%
     78 * Input Voltage (max): 140V
     79 * Time resolution: 1 ms
     80= Current outputs =
     81
     82 * 4 current loop transmitters
     83 * Dielectric strength 33000V DC (1 min)
     84 * Current range: 4-20mA or ±5mA software selectable
     85 * Accuracy: <0,5%
     86 * Transient: <200ms
     87 * Maximum load:   
     88  * <2K? @ ±5mA
     89  * <1K? @ 4÷20mA
     90= Communication =
     91
     92 * HMI with 4 lines display and keypad
     93 * 16 LED
     94 * Local and remote interface
     95 * Ethernet 10/100 BASE-TX with auto MDI/MDI-X
     96 * Ethernet 100BASE-FX (SC) - optical link
     97 * Configurable as knot of a net LAN/WAN
     98 * 1 RS232 front side (19.200 baud fixed)
     99 * 1 RS232 back side (up to 115.200 baud)
     100 * Remote connection with analog modem (not included)
     101 * Isolated comunication port
     102 (Ethernet: 1500Vrms – Serials: 2500 Vrms)
     103 * Field connection with 50 pins rectangular connectors
     104= Customizing =
     105
     106 * Power Supply with different input voltage
     107 * Different full-scales on voltage inputs on client demand
     108 * Up to 6 digital inputs available for custom application
     109 * 24V digital input with threshold 18V ± 10%
     110 * Custom range for current outputs
     111 * HMI multi functions
     112 * Additional Ethernet port 10/100BASE-TX backside
     113 * ST connector for ethernet 100BASE-FX optical link
     114 * Configuration parameters and thresholds are modifiable at the request within the limits of the device
     115 * Integrated WebServer for parameterization with Internet Browser
     116 * FTPserver for record download
     117 * Different range for recording time
     118 * AC digital input
     119 * Optional relay outputs
     120 * Different logical assignments to alarm
     121= Standards and specifications compliance =
     122
     123 * IEC 61000 – 4 – 2 (Level 3)
     124 * IEC 61000 – 4 – 3 (Level 3)
     125 * IEC 61000 – 4 – 4 (Level 3)
     126 * IEC 61000 – 4 – 5 (Level 4)
     127 * IEC 61000 – 4 – 6 (Level 3)
     128 * IEC 61000 – 4 – 8 (Level 5)
     129 * IEC 61000 – 4 – 10 (Level 3)
     130 * IEC 61000 – 4 – 12 (Level 3)
     131 * IEC 61000 – 4 – 16 (Level 4)
     132 * IEC 61000 – 4 – 17 (Level 3)
     133 * IEC 61000 – 4 – 29 (Level 3)
     134 * ENEL DV938
     135 * ENEL REMC01
     136 * ENEL REMC02
     137 * ENEL RMEC01
     138 * ENEL RCLI01
     139 * CEI 45-5
     140 * CEI 70-1 IP30 (front) IP20 (case)
     141 * COMTRADE standard IEEE Std C37.111-1991