Version 6 (modified by Rayx, on Apr 29, 2007 at 9:07:07 AM) (diff)


RTEMS bsp for Philips(NXP)'s ARM7 processor

This BSP is design for Philips's LPC2210/LPC2212/LPC2214/LPC2290/LPC2294 (LPC22xx) serial ARM processor. And it can be ported to LPC21xx ARM MCU.

Philip's LPC22xx ARM processor has an ARM7TDMI-S core, and can run at 60MHz. It has an external memory bus, and peripherals like UART, I2C, SPI, ADC and etc. Some of them got on chip flash (256k) and CAN.

The board used to develop the board is compatible with LPC-E2214/LPC-E2294 boards from The board use to develop the BSP has a 512K SRAM( No ROM, program runs in RAM via a JTAG-ICE) and two serial ports. Base address is set to 0x81000000.

The license and distribution terms for this file may be found in the file LICENSE in this distribution or at

Test Reports