Changes between Version 19 and Version 20 of TBR/BSP/Rad750


Ignore:
Timestamp:
Jan 21, 2011, 1:42:53 AM (9 years ago)
Author:
Jennifer
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • TBR/BSP/Rad750

    v19 v20  
    6161The constants are defined as follows:
    6262
    63  *  BSP_DIRTY_MEMORY - When set to 1, the BSP Framework will not put a non-zero pattern into the RTEMS Workspace and C program heap.
    64  *  BSP_PRESS_KEY_FOR_RESET - The application will not print a message and wait until pressed before resetting board when application exits
    65  *  CONSOLE_USE_INTERRUPTS - The console operates in polled mode
    66  *  ENHANCED_PPCI - Indicating that the board has the enhanced PPCI chip
    67  *  ENABLE_SHADOWED_DATA - A shadow copy of initialized data is made on the first run and is reloaded on subsequent runs.
    68  *  BSP_RESET_BOARD_AT_EXIT - The board will be reset when the application exits.
    69  *  PPC_USE_DATA_CACHE - Data cache is disabled
    70  *  PPC_USE_INSTRUCTION_CACHE - Instruction cache is enabled
    71  *  SHOW_PCI_SETTING - Does not Print out PCI findings during initialization.
     63 *  BSP_DIRTY_MEMORY - When set to 1, the BSP Framework will put a non-zero pattern into the RTEMS Workspace and C program heap.
     64 *  BSP_PRESS_KEY_FOR_RESET - When set to 1, the application will print a message and wait until pressed before resetting board when application exits
     65 *  CONSOLE_USE_INTERRUPTS - When set to 1, the console operates in interrupt mode. Otherwise, it operates in polled mode.
     66 *  ENHANCED_PPCI - When set to 1, the Ehanced PPCI chip is selected.
     67 *  ENABLE_SHADOWED_DATA - When set to 1, a shadow copy of initialized data is made on the first run and is reloaded on subsequent runs.
     68 *  BSP_RESET_BOARD_AT_EXIT - When set to 1, the board will be reset when the application exits.
     69 *  PPC_USE_DATA_CACHE - When set to 1, Data cache is enabled
     70 *  PPC_USE_INSTRUCTION_CACHE - When set to 1, instruction cache is enabled
     71 *  SHOW_PCI_SETTING - When set to 1, the PCI bus and slot findings are displayed during startup
    7272= Board Setup =
    7373