Changes between Version 41 and Version 42 of TBR/BSP/Psim
- Timestamp:
- 12/02/10 21:03:18 (13 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
TBR/BSP/Psim
v41 v42 101 101 For J6, J100, J7 and J101, install jumpers across pins 2-3 on all four 102 102 headers for rear P2 Ethernet. For front-panel Ethernet, install jumpers 103 across pins 1-2 on all four headers. 104 * Note 105 If the rear P2 Ethernet is selected by jumpers J6, J7, J100, and 103 across pins 1-2 on all four headers.'''Note''' If the rear P2 Ethernet is selected by jumpers J6, J7, J100, and 106 104 J101, the Ethernet signals also connect to PMC 1 user I/O 107 105 connector J14. If a PMC card is plugged into PMC slot 1, there … … 125 123 SBC/IPMC712 mode, install a jumper across pins 2-3 for J32 and install a 126 124 jumper across pins 1-2 for J28. 127 * Warning 125 '''Warning''' 128 126 When J28 is configured for SBC/IPMC mode, –12V is supplied to P2 pin 129 127 A30. If there is an incompatible board plugged into this P2 slot, damage