Version 8 (modified by Nickwithers, on 01/16/14 at 07:54:23) (diff) |
---|
Mvme3100
{{Infobox BSP |BSP_name = MVME3100 |Manufacturer = Emerson Network Power |image = MVME3100.png|300px |Board_URL = Emerson |Architecture = PowerPC |CPU_model = MPC8540 |RAM = 256MB or 512MB ECC SDRAM |NVMEM = 32MB to 256MB Flash |Serial = 4 async |Video = NA }}
The MVME3100 is a VME board based on a MPC750 processor. It is supported with the MVME3100 BSP.
Overview
The MVME3100, one of the first VMEbus products with the system-on-chip MPC8540 processor, offers a growth path for VMEbus customers with applications on the previous generation of VME, specifically the MPC8240 and similar (MPC603 family) processors. The system-on-chip implementation offers power/thermal, reliability, and lifecycle advantages not typically found in alternative architectures. The faster processor and 2eSST VMEbus interface (the same as the MVME6100) combine to offer significant performance improvement.
New cost-effective peripherals can be integrated easily using USB and Serial ATA interfaces. SATA represents a significant cost reduction opportunity from older SCSI technology, with generally lower drive pricing for equivalent capacity.
Processor
- MPC8540 PowerQUICC III™ integrated processor (e500 core)
- Clock Frequency: 667 or 833 MHz
- On-chip L1 Cache (I/D): 32K/32K
- On-chip L2 Cache: 256KB look-aside
DRAM
- 512MB of DDR333 ECC memory
- 166 MHz
Flash Memory
- 32MB to 256 MB Flash memory
- On-board programmable
NVRAM
- SEEPROM
- Capacity: 128KB (available for users), 8KB baseboard Vital Product Data (VPD)
I/O
- Asynchronous Serial Ports: Four, RJ-45, labeled as COM2-5
- Ethernet: One 10/100/1000 BaseTX and one 10/100 BaseTX, RJ-4
VMEBus Interface
- Controller: Tundra Tsi148 PCI-X to VMEbus bridge with support for VME64 and 2eSST protocols
USB Interface
- Controller: NEC µ720101
- Configuration: USB 2.0
- One port
- Connector: One powered port routed to front panel
SATA Interface
- Controller: Intel® G31244
- Configuration: 1.5Gbps/port, Legacy or DPA mode (switch-selected)
- Two ports
- Connectors: One routed to front panel, one header on board top surface
- Indicators: Planar activity LEDs on board back side
Block Diagram
=References=
{{Navbox_BSPs}}