Mvme2100

Test Reports

4.6.4: User:RichardCampbell? Reported to run hello.

4.6.99.2: User:RichardCampbell? Reported to run hello, ticker, netdemo.

Board Setup

Below are some of the PPC5-Bug settings:

NIOT

PPC5-Bug>niot
Controller LUN =00?
Device LUN     =00? 
Node Control Memory Address =01F17840? 
Client IP Address      =192.168.3.130? 
Server IP Address      =192.168.3.107? 
Subnet IP Address Mask =255.255.255.0? 
Broadcast IP Address   =255.255.255.255? 
Gateway IP Address     =0.0.0.0? 
Boot File Name ("NULL" for None)     =hello.exe? 
Argument File Name ("NULL" for None) =? 
Boot File Load Address         =001F0000? 
Boot File Execution Address    =001F0000? 
Boot File Execution Delay      =00000000? 
Boot File Length               =00000000? 
Boot File Byte Offset          =00000000? 
BOOTP/RARP Request Retry       =00? 
TFTP/ARP Request Retry         =00? 
Trace Character Buffer Address =00000000? 
BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? 
BOOTP/RARP Reply Update Control: Yes/No (Y/N)       =Y? 

ENV

PPC5-Bug>env
Bug or System environment [B/S] = B? 
Maximum Memory Usage (Mb, 0=AUTO) =   1? 
Field Service Menu Enable [Y/N] = N? 
Remote Start Method Switch [G/M/B/N] = B? 
Probe System for Supported I/O Controllers [Y/N] = Y? 
Auto-Initialize of NVRAM Header Enable [Y/N] = Y? 
Network PReP-Boot Mode Enable [Y/N] = Y? 
Negate VMEbus SYSFAIL* Always [Y/N] = N? 
SCSI Bus Reset on Debugger Startup [Y/N]   = N? 
Primary SCSI Bus Negotiations Type [A/S/N] = A? 
Primary SCSI Data Bus Width [W/N]          = N? 
Secondary SCSI Identifier                  = "07"? 
NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N]           = N? 
NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N? 
NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay            = 5? 
Auto Boot Enable [Y/N]           = N? 
Auto Boot at power-up only [Y/N] = N? 
Auto Boot Scan Enable [Y/N]      = Y? 
Auto Boot Scan Device Type List  = FDISK/CDROM/TAPE/HDISK/? 
Auto Boot Controller LUN   = 00? 
Auto Boot Device LUN       = 00? 
Auto Boot Partition Number = 00? 
Auto Boot Abort Delay      = 7? 
Auto Boot Default String [NULL for an empty string] = ? 
ROM Boot Enable [Y/N]            = N? 
ROM Boot at power-up only [Y/N]  = Y? 
ROM Boot Enable search of VMEbus [Y/N] = N? 
ROM Boot Abort Delay             = 5? 
ROM Boot Direct Starting Address = FFF00000? 
ROM Boot Direct Ending Address   = FFFFFFFC? 
Network Auto Boot Enable [Y/N]           = N? 
Network Auto Boot at power-up only [Y/N] = N? 
Network Auto Boot Controller LUN = 00? 
Network Auto Boot Device LUN     = 00? 
Network Auto Boot Abort Delay    = 5? 
Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? 
Memory Size Enable [Y/N]         = Y? 
Memory Size Starting Address     = 00000000? 
Memory Size Ending Address       = 02000000? 
DRAM Speed in NANO Seconds       = 15? 
ROM Bank A Access Speed (ns) = 90? 
ROM Bank B Access Speed (ns) = 70? 
DRAM Parity Enable [On-Detection/Always/Never - O/A/N]    = O? 
L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? 
PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A0B0E0F? 
Serial Startup Code Master Enable [Y/N] = N? 
Serial Startup Code LF Enable [Y/N] =     N? 
VME3PCI Master Master Enable [Y/N] = Y? 
PCI Slave Image 0 Control                = 00000000? 
PCI Slave Image 0 Base Address Register  = 00000000? 
PCI Slave Image 0 Bound Address Register = 00000000?
PCI Slave Image 0 Translation Offset     = 00000000? 
PCI Slave Image 1 Control                = 00000000? 
PCI Slave Image 1 Base Address Register  = 01000000? 
PCI Slave Image 1 Bound Address Register = 20000000? 
PCI Slave Image 1 Translation Offset     = 00000000? 
PCI Slave Image 2 Control                = 00000000? 
PCI Slave Image 2 Base Address Register  = 20000000? 
PCI Slave Image 2 Bound Address Register = 22000000? 
PCI Slave Image 2 Translation Offset     = D0000000? 
PCI Slave Image 3 Control                = 00000000? 
PCI Slave Image 3 Base Address Register  = 2FFF0000? 
PCI Slave Image 3 Bound Address Register = 30000000? 
PCI Slave Image 3 Translation Offset     = D0000000? 
VMEbus Slave Image 0 Control                = E0F20000? 
VMEbus Slave Image 0 Base Address Register  = 00000000? 
VMEbus Slave Image 0 Bound Address Register = 02000000? 
VMEbus Slave Image 0 Translation Offset     = 00000000? 
VMEbus Slave Image 1 Control                = 00000000? 
VMEbus Slave Image 1 Base Address Register  = 00000000? 
VMEbus Slave Image 1 Bound Address Register = 00000000? 
VMEbus Slave Image 1 Translation Offset     = 00000000? 
VMEbus Slave Image 2 Control                = 00000000? 
VMEbus Slave Image 2 Base Address Register  = 00000000? 
VMEbus Slave Image 2 Bound Address Register = 00000000? 
VMEbus Slave Image 2 Translation Offset     = 00000000? 
VMEbus Slave Image 3 Control                = 00000000? 
VMEbus Slave Image 3 Base Address Register  = 00000000? 
VMEbus Slave Image 3 Bound Address Register = 00000000? 
VMEbus Slave Image 3 Translation Offset     = 00000000? 
VMEbus Register Access Image Control Register = 00000000? 
VMEbus Register Access Image Base Address Register = 00000000? 
PCI Miscellaneous Register       = 10000000? 
Special PCI Slave Image Register = 00000000? 
Master Control Register          = 80C00000? 
Miscellaneous Control Register   = 52060000? 
User AM Codes                    = 00000000? 
Firmware Command Buffer Enable [Y/N] = N? 
Firmware Command Buffer Delay  = 5? 
Firmware Command Buffer :