Changes between Version 11 and Version 12 of TBR/BSP/Mvme162


Ignore:
Timestamp:
Mar 25, 2011, 11:42:44 PM (9 years ago)
Author:
Richard Campbell
Comment:

/* Firmware Setup */ Added RTEMS Lab board settings

Legend:

Unmodified
Added
Removed
Modified
  • TBR/BSP/Mvme162

    v11 v12  
    3232= Board Setup =
    3333
     34= RTEMS Lab Board =
    3435
    35 If there are special jumper or ROM monitor settings, describe them.
     36
     37The env settings:
     38{{{
     39MPU Clock Speed =25Mhz
     40
     41162-Bug>env
     42Bug or System environment [B/S] = B?
     43Field Service Menu Enable [Y/N] = N?
     44Remote Start Method Switch [G/M/B/N] = B?
     45Probe System for Supported I/O Controllers [Y/N] = Y?
     46Negate VMEbus SYSFAIL* Always [Y/N] = N?
     47Local SCSI Bus Reset on Debugger Startup [Y/N] = N?
     48Local SCSI Bus Negotiations Type [A/S/N]       = A?
     49Industry Pack Reset on Debugger Startup [Y/N]  = Y?
     50Ignore CFGA Block on a Hard Disk Boot [Y/N]    = Y?
     51Auto Boot Enable [Y/N]   = N?
     52Auto Boot at power-up only [Y/N] = Y?
     53Auto Boot Controller LUN = 00?
     54Auto Boot Device LUN     = 00?
     55Auto Boot Abort Delay    = 15?
     56Auto Boot Default String [NULL for a empty string] = ?
     57ROM Boot Enable [Y/N]            = N?
     58ROM Boot at power-up only [Y/N]  = Y?
     59ROM Boot Enable search of VMEbus [Y/N] = N?
     60ROM Boot Abort Delay             = 0?
     61ROM Boot Direct Starting Address = FF800000?
     62ROM Boot Direct Ending Address   = FFDFFFFC?
     63Network Auto Boot Enable [Y/N]   = N?
     64Network Auto Boot at power-up only [Y/N] = Y?
     65Network Auto Boot Controller LUN = 00?
     66Network Auto Boot Device LUN     = 00?
     67Network Auto Boot Abort Delay    = 5?
     68Network Auto Boot Configuration Parameters Pointer (NVRAM) = FFE0FF00?
     69Memory Search Starting Address   = 00000000?
     70Memory Search Ending Address     = 01000000?
     71Memory Search Increment Size     = 00010000?
     72Memory Search Delay Enable [Y/N] = N?
     73Memory Search Delay Address      = FFFFD20F?
     74Memory Size Enable [Y/N]         = Y?
     75Memory Size Starting Address     = 00000000?
     76Memory Size Ending Address       = 01000000?
     77Base Address of Dynamic Memory   = 00000000?
     78Size of Parity Memory            = 00000000?
     79Size of ECC Memory Board #0      = 01000000?
     80Size of ECC Memory Board #1      = 00000000?
     81Base Address of Static Memory    = FFE00000?
     82Size of Static Memory            = 00020000?
     83Slave Enable #1 [Y/N] = Y?
     84Slave Starting Address #1 = 00000000?
     85Slave Ending Address #1   = 00FFFFFF?
     86Slave Address Translation Address #1 = 00000000?
     87Slave Address Translation Select #1  = 00000000?
     88Slave Control #1 = 03FF?
     89Slave Enable #2 [Y/N] = N?
     90Slave Starting Address #2 = 00000000?
     91Slave Ending Address #2   = 00000000?
     92Slave Address Translation Address #2 = 00000000?
     93Slave Address Translation Select #2  = 00000000?
     94Slave Control #2 = 0000?
     95Master Enable #1 [Y/N] = Y?
     96Master Starting Address #1 = 01000000?
     97Master Ending Address #1   = EFFFFFFF?
     98Master Control #1 = 0D?
     99Master Enable #2 [Y/N] = N?
     100Master Starting Address #2 = 00000000?
     101Master Ending Address #2   = 00000000?
     102Master Control #2 = 00?
     103Master Enable #3 [Y/N] = N?
     104Master Starting Address #3 = 00000000?
     105Master Ending Address #3   = 00000000?
     106Master Control #3 = 00?
     107Master Enable #4 [Y/N] = N?
     108Master Starting Address #4 = 00000000?
     109Master Ending Address #4   = 00000000?
     110Master Address Translation Address #4 = 00000000?
     111Master Address Translation Select #4  = 00000000?
     112Master Control #4 = 00?
     113Short I/O (VMEbus A16) Enable [Y/N] = Y?
     114Short I/O (VMEbus A16) Control      = 01?
     115F-Page (VMEbus A24) Enable [Y/N]    = Y?
     116F-Page (VMEbus A24) Control         = 02?
     117ROM Access Time Code          = 03?
     118FLASH Access Time Code        = 02?
     119MCC Vector Base               = 05?
     120VMEC2 Vector Base #1          = 06?
     121VMEC2 Vector Base #2          = 07?
     122VMEC2 GCSR Group Base Address = D2?
     123VMEC2 GCSR Board Base Address = 00?
     124VMEbus Global Time Out Code   = 01?
     125Local Bus Time Out Code       = 02?
     126VMEbus Access Time Out Code   = 02?
     127IP A Base Address              = 00000000?
     128IP B Base Address              = 00000000?
     129IP C Base Address              = 00000000?
     130IP D Base Address              = 00000000?
     131IP D/C/B/A Memory Size         = 00000000?
     132IP D/C/B/A General Control     = 00000000?
     133IP D/C/B/A Interrupt 0 Control = 00000000?
     134IP D/C/B/A Interrupt 1 Control = 00000000?
     135}}}
     136
     137The niot settings:
     138{{{
     139162-Bug>niot
     140Controller LUN =00?
     141Device LUN     =00?
     142Node Control Memory Address =FFE10000?
     143Client IP Address      =192.168.1.245?
     144Server IP Address      =192.168.1.92?
     145Subnet IP Address Mask =255.255.255.0?
     146Broadcast IP Address   =192.168.1.255?
     147Gateway IP Address     =0.0.0.0?
     148Boot File Name ("NULL" for None)     =/mvme162.img?
     149Argument File Name ("NULL" for None) =?
     150Boot File Load Address         =00020000?
     151Boot File Execution Address    =00020000?
     152Boot File Execution Delay      =00000000?
     153Boot File Length               =00000000?
     154Boot File Byte Offset          =00000000?
     155BOOTP/RARP Request Retry       =00?
     156TFTP/ARP Request Retry         =00?
     157Trace Character Buffer Address =00000000?
     158BOOTP/RARP Request Control: Always/When-Needed (A/W)=A?
     159BOOTP/RARP Reply Update Control: Yes/No (Y/N)       =Y?
     160}}}
    36161= Downloading and Executing =
    37162