= Mtx603e =


{{Infobox BSP
|BSP_name     = MTX603e
|Manufacturer = Motorola
|image        = Mtxppc.png
|caption      = 
|Board_URL    = [References http://www.rtems.org/wiki/index.php/Mtx603e#References]
|Architecture = PowerPC RISC 
|CPU_model    = MPC603e
|Monitor      = uBoot, uMon
|Simulator    = Yes. [wiki:Developer/Simulators/SkyEye  Skyeye]
|Aliases      = MTX603
|RAM          = 16MB-256MB
|NVMEM        = 1+8M Flash
|Serial       = 4 x DTE ports (COM1 and COM2)
|NICs         = Ethernet DEC21143 10BaseT/100BaseTx
|Other        = LED-mezzanine/remote-reset connector
}}
= Overview =

The MTX series motherboard consists of the MPC603e/604e processor, the Raven PCI Bridge and Interrupt Controller, the ECC Memory Controller Falcon chipset, 5M of Boot FLASH, ECC-protected DRAM, and a large set of I/O peripherals. The MTX will support single 603ev, single 604e processors, and dual 604e processors. 
In the dual processor configuration, the internal operating frequencies of the 604e’s are independently configurable. I/O peripheral devices on the PCI bus are: SCSI interface, Ethernet interface, two 64-bit PMC and one 64-bit PCI slot, or three 32-bit PCI slots.

Functions provided from the ISA bus are: two EIDE ports, a host mode P1284 parallel port, a peripheral mode P1284 parallel port, two async serial ports, two sync/async serial ports, a real time clock, and counters/timers. Rear panel connectors on the MTX motherboard include: a 6-pin circular DIN connector for the keyboard interface, a 6-pin circular DIN connector for the mouse interface, a 25-pin host mode parallel port connector, an RJ45 connector for 10/100BaseT connections, and a 15 pin connector for the AUI interface. 

The MTX series can be populated with two IEEE1386.1 PCI Mezzanine Card (PMC) slots plus a 64-bit PCI slot, or with three 32-bit PCI slots. The 32-bit PCI slots support ATX standard I/O spacing. All slots use rear panel I/O. The 64-bit PCI slot supports a horizontal PCI card via a custom riser card. 
DRAM memory is added via DIMM sockets, and the serial presence detect (SPD) feature of the DIMM DRAMs is supported via the I2C bus controller.

[wiki:File:_Mtx.png 400px]
= Board Setup =


If there are special jumper or ROM monitor settings, describe them.
= Downloading and Executing =


Describe the download procedure.
= Debugging =


How do you debug code on this board?  What gdb setup?  BDM, stub, etc?
= Test Reports =


{{Test Report
|Version = CVS head
|Date    = 7 Jan 2009
|User    = [wiki:User:JoelSherrill User:JoelSherrill]
|Report  = reports that SkyEye 1.2.5 can run most tests. 
}}

= References =


 *  [http://www.emersonnetworkpower.com/en-US/Products/EmbeddedComputing/Documents/DocumentationArchive/TechnicalDocumentation/02/mtxapg.pdf mtxapg.pdf]
 *  [http://www.emersonnetworkpower.com/en-US/Products/EmbeddedComputing/Documents/DocumentationArchive/TechnicalDocumentation/02/mtxaih1.pdf mtxaih1.pdf]
 *  [http://www.emersonnetworkpower.com/en-US/Products/EmbeddedComputing/Documents/DocumentationArchive/TechnicalDocumentation/02/mtxpciih.pdf mtxpciih.pdf]

{{Navbox_BSPs}}