= Mbx860 002 =


Infobox expected.
= Overview =

= Motorola MBX860 002 =

= Specifications =

MBX860 models include: 
 * 40 MHz MPC860 processor 
 * PC/104-Plus
 * 10BaseT Ethernet
 * EIDEand Floppy interfaces 
 * 32KB NVRAM 
 * keyboard, mouse, IR, COM1 and COM2 ports
 * COMM interface connector
= Processor =


The MPC860 processor is especially well-suited for applications involving communications and networking systems. The CPU on the MPC860 is a 32-bit PowerPC™ implementation incorporating memory management units (MMUs) and instruction/data caches.It has a communications processor module that includes an Interprocessor-Integrated Controller (I2C) channel for data exchanges between the MPC860 and other ICs with I2C capability — microcontrollers, LCD displays, real-time clock devices, etc. 
The MPC860’s memory controller supports all available types of memory. Its PCMCIA controller supports up to two PCMCIA sockets (one is implemented on the MBX) and a real-time clock.
= DRAM =

The MBX series embedded controller has provision for either 4MB or 16MB of on-board DRAM, soldered in place. In addition, it accommodates 8MB to 64MB of expansion DRAM in a 168-pin DIMM (dual in-line memory module) socket, XU3.
The on-board DRAM is composed of two 16-bit devices (either 1M x 16 or 4M x 16). Parity protection is optional.
If expansion DRAM is installed in the DIMM socket, it must have the same characteristics as the on-board DRAM: single bank, 3.3V,EDO (extended data out), 4K refresh rate, and same clock speed.
= Flash Memory =

= IO =

= NVRAM =

= Battery =

=  =Block diagram==


[wiki:File:diagram12.png File:diagram12.png]

==References==

http://www.emersonnetworkpower.com/en-US/Products/EmbeddedComputing/Documents/DocumentationArchive/TechnicalDocumentation/02/mbxapg.pdf

http://www.equinox-tech.com/downloads/freescale/MBXA_IH1.pdf