= M5484FireEngine = {{Infobox BSP |BSP_name = M5484 |Manufacturer = Fire Engine |image = M5484LITEPHOTO.jpg |Board_URL = http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5484LITE |Architecture = Freescale Fire Engine |CPU_model = MCF5484CZP200 |RAM = 64MB DDR-SDRAM |NVMEM = 4MB Flash |Serial = One RS-232 Serial Port |NICs = One PCI slot (32 bit, 33 or 66MHz, 3.3V) }} The M5484LITE development kit contains a system-on-module, called a Fire Engine, containing 64 MBytes of DDR-SDRAM, 4 MB of Boot Flash,and a USB Device output. The Fire Engine module, along with the included ethernet ports, PCI slot, serial interface, CAN interface, and a ColdFire debug module. The board includes: The M5484 Fire Engine Module (SOM-ETX) includes * MCF5484CZP200 Processor * Limited superscalar V4 ColdFire processor core * Double-precision FPU conforms to IEE-754 standard * 64MB DDR-SDRAM * 4MB Flash The base board includes the following features: * Controller Area Network (CAN) 2.0B Interface * 32-bit double data rate (DDR) synchronous DRAM (SDRAM) controller * 66–133 MHz operation * Supports DDR and SDR DRAM * Built-in initialization and refresh * Up to four chip selects enabling up to one GB of external * 32-Kbyte system SRAM * Arbitration mechanism shares bandwidth between internal bus masters * IrDA 1.1 interfaces * Up to four programmable serial controllers (PSCs) each with separate 512-byte receive and transmit FIFOs for UART, USART, modem, codec * Debug and test features * ColdFire background debug mode (BDM) port * JTAG/ IEEE 1149.1 test access port * Estimated power consumption * Less than 1.5W (388 PBGA) = References = * http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5484LITE