= M5484FireEngine =

||BSP_name||M5484||
||Manufacturer||Fire Engine||
||Image ||M5484LITEPHOTO.jpg||
||Board_URL||http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5484LITE||
||Architecture||Freescale Fire Engine||
||CPU_model||MCF5484CZP200||
||RAM||64MB DDR-SDRAM||
||NVMEM||4MB Flash||
||Serial||One RS-232 Serial Port||
||NICs||One PCI slot (32 bit, 33 or 66MHz, 3.3V)||


The M5484LITE development kit contains a system-on-module, called a Fire Engine, containing 64 MBytes of DDR-SDRAM, 4 MB of Boot Flash,and a USB Device output. The Fire Engine module, along with the included ethernet ports, PCI slot, serial interface, CAN interface, and a ColdFire debug module.  The board includes:

The M5484 Fire Engine Module (SOM-ETX) includes
 *  MCF5484CZP200 Processor
  *  Limited superscalar V4 ColdFire processor core
  *  Double-precision FPU conforms to IEE-754 standard
 *  64MB DDR-SDRAM
 *  4MB Flash

The base board includes the following features:
 *  Controller Area Network (CAN) 2.0B Interface 
 *  32-bit double data rate (DDR) synchronous DRAM (SDRAM) controller
  *  66–133 MHz operation
  *  Supports DDR and SDR DRAM
  *  Built-in initialization and refresh
  *  Up to four chip selects enabling up to one GB of external
 *  32-Kbyte system SRAM
  *  Arbitration mechanism shares bandwidth between internal bus masters
 *  IrDA 1.1 interfaces
 *  Up to four programmable serial controllers (PSCs) each with separate 512-byte receive and transmit FIFOs for UART, USART, modem, codec
 *  Debug and test features
  *  ColdFire background debug mode (BDM) port
  *  JTAG/ IEEE 1149.1 test access port
 *  Estimated power consumption
  *  Less than 1.5W (388 PBGA)
= References =

 *  http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5484LITE