= LM3S6965 =



= Overview =

= Stellaris Microcontroller LM3S6965 =


The Stellaris® LM3S6965 Evaluation Board is a compact and versatile evaluation platform for the Stellaris LM3S6965 ARM® Cortex™-M3-based microcontroller. The evaluation kit uses the LM3S6965 microcontroller’s fully integrated 10/100 Ethernet controller to demonstrate an
embedded web server.
You can use the board either as an evaluation platform or as a low-cost in-circuit debug interface(ICDI). In debug interface mode, the on-board microcontroller is bypassed, allowing programming or debugging of an external target. The kit is also compatible with high-performance external JTAG debuggers.
This evaluation kit enables quick evaluation, prototype development, and creation of applicationspecific designs for Ethernet networks. The kit also includes extensive source-code examples,allowing you to start building C code applications quickly.
= Specifications =

= Features of the LM3S6965 Microcontroller =

 * 32-bit RISC performance using ARM® Cortex™-M3 v7M architecture
  * 50-MHz operation
  * Hardware-division and single-cycle-multiplication
  * Integrated Nested Vectored Interrupt Controller (NVIC)
  * 42 interrupt channels with eight priority levels
 * 256 KB single-cycle Flash
 * 64 KB single-cycle SRAM
 * Four general-purpose 32-bit timers
 * Integrated Ethernet MAC and PHY
 * Three fully programmable 16C550-type UARTs
 * Four 10-bit channels (inputs) when used as single-ended inputs
= Processor =


=  =Block diagram==

[wiki:File:Diagram23.png File:Diagram23.png]

==References==


http://www.ti.com/lit/ug/spmu029a/spmu029a.pdf

http://www.ti.com/lit/ds/symlink/lm3s6965.pdf