= Kit637 v6 = = Overview = This Development Kit is composed by the: * CSB637 Single Board Computer * CSB937 Main Board for the Target * Optrex LCD (T-51750AA, 640x480) * LCD Inverter(xx) * Touchscreen (not supported in this BSP)= CSB637 Single Board Computer = '''Specifications''' * 184Mhz ARM920T Core * 64Mbyte SDRAM * 8Mbyte FLASH * Single RS232 Debug Port * Three TTL UARTs (7wire x 1, 4wire x 2) * Two Synchronous Serial Ports (SPI, I2S, etc.) and 400Khz Two Wire I/F * USB 2.0 Host Port (x2) and USB 2.0 Device Port * OnBoard, Low Power 10/100 Ethernet Phy * Dual 4Bit SD/MMC Controllers * OnBoard LCD/CRT Controller (up to 800x600) with separate 2Mbyte Frame Buffer * 40+ GPIO's with Interrupt Capability * JTAG Debug Port with 16Bit Embedded Trace * Ultracompact: 1.77" (45mm) wide x 2.6" (66mm) long x 0.355" (9mm) * 95% Efficient 3.3V @ 4.5A Switching Regulator (can supply up to 3.5A to user board) * 1W Typ., 0.75W Max. Power Consumption * 0C to +70C Standard, 20C to +85C Optional '''Overview''' Designed for low power, portable use, the CSB637 represents a breakthrough in functionality, size and power. At the heart of the CSB637 lies the Atmel AT91RM9200 Microprocessor. The ARM920T core combines excellent performance with very low power consumption. This ability, along with the on chip 10/100 Ethernet, SD/MMC, 4 UARTS, SSI, SPI and Compact Flash Interfaces allows the AT91RM9200 to power lowcost, high performance products for industrial automation, telematics, medical applications, etc.= CSB937 Target Board = '''Specifications''' * Appropriate Connectors for RS232 (Debug UART), Ethernet and USB (Host and Device) * Two GPIO Driven LED's for Status Display * One GPIO Readable Switch for User Input * Type I/II Compact Flash and 4Bit SD/MMC Sockets * .1" Headers for access to all unused and most used CSB637 signals for analysis and expansion * 5V @ 3A Switxhing Regulator for USB Host, LCD and LCD Backlight * Compact 4" x 5" size '''Overview''' The CSB937 Development Board converts the CSB937 Micro Single Board Computer (uSBC) into an advanced product development platform. As the CSB937 uSBC is optimized for OEM use, it does not have the DB9's, RJ45, Switches, etc. found on larger, older technology single board computers. The CSB937 provides those standard connectors, while also allowing complete access to the GPIO and peripheral functions of the CSB637 needed during the product development stage. Schematics and gerbers for the CSB937 are available free of charge to assist in the design and integration of the CSB637 into your custom product.