Changes between Version 14 and Version 15 of TBR/BSP/Genmcf548x
- Timestamp:
- 12/01/10 02:24:02 (13 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
TBR/BSP/Genmcf548x
v14 v15 113 113 <p> 114 114 • Connect the included USB cable to the host PC. 115 </p> 116 <p> 115 117 • Connect the P&E USB ColdFire Multilink adapter to the other end of the USB standard B 116 118 connector. 119 </p> 120 <p> 117 121 • Connect the P&E Microcomputer Multilink adapter to the 26-pin BDM header on the Carrier Board 118 122 at X2. This connection is used for communication between the Freescale’s CodeWarrior 119 123 development suite and the phyCORE-MCF548x target hardware. Ensure that pin one marked on 120 124 the adapter connects with pin one of the X2 connector. 125 </p> 126 <p> 121 127 • Connect the included serial cable to the lower socket (P2A) of the double DB-9 connector on the 122 128 Carrier Board and to a free serial port of your host-PC. This will enable you to monitor board-host 123 129 communication via a terminal emulation program, such as Windows HyperTerminal. 130 </p> 131 <p> 124 132 • Using the included 5VDC power adapter, connect the power socket on the board (X10) to a power 125 133 supply (refer to Figure 3 for the correct polarity). The phyCORE module/Carrier Board combination