wiki:TBR/BSP/Gen83xx

Version 5 (modified by JeppeHallgren, on 12/14/10 at 22:04:39) (diff)

/* mpc8349eamds */

Gen83xx

{{Infobox BSP |BSP_name = XXX |Manufacturer = XXX |image = MPC8313ERDB_PRODIMG.jpg |Architecture = PowerPC |CPU_model = MPC83xx |Simulator = No }}

This BSP supports boards based on the Freescale MPC834x PowerQUICC II Pro microcontrollers. The BSP supports multiple board instances through the use of BSP variants.

MPC8313E-RDB

From: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8313E-RDB&fsrch=1

The MPC8313E-RDB reference platform is ideal for hardware and software development for cost-optimized networking applications. The cost-effective MPC8313E communications processor family meets the requirements of several small office/home office (SOHO), printing, IP services and industrial control applications. It leverages Freescale’s highly integrated MPC8313E processor built on Power Architecture™ technology and leading-edge external components—a 5-port Gigabit Ethernet switch, USB port, one Peripheral Component Interconnect (PCI) slot, one MiniPCI slot and one SD card memory slot. The high level of integration in the MPC8313E helps to lower overall system costs, improve performance and simplify board design.

Imported from old wiki.

  • CPU - Freescale MPC8313E running at 333/333 MHz (CPU/DDR2)
  • Memory subsystem
    • 128 MByte unbuffered DDR2 SDRAM discrete devices
    • 8 MByte Flash single-chip memory
    • 32 MByte NAND Flash memory
    • 256 KBit M24256 serial EEPROM
    • SD connector to interface with the SD memory card in SPI mode
  • Interfaces
    • 10/100/1000 BaseT Ethernet ports:
      • eTSEC1, RGMII interface: five 10/100/1000 BaseT RJ-45 interfaces using Vitesse™ VSC7385 L2 switch
      • eTSEC2, selectable RGMII or SGMII interface: one 10/100/1000 BaseT RJ-45 interface using Mavell™ 88E1111 PHY
    • USB 2.0 port:
      • High speed host/device USB interface: selectable on-chip PHY or external ULPI PHY interface by SMSC USB3300 USB PHY
    • PCI: 32-bit PCI interface running at up to 66 MHz
      • One 32-bit 3.3 V PCI slot connected to PCI bus
      • One 32-bit 3.3 V miniPCI slot connected to PCI bus
    • Dual UART ports:
      • DUART interface: supports two UART up to 115200bps for console display
  • Board connectors
    • LCD connectors by GPIO
    • ATX power supply connector
    • JTAG/COP for debugging

Mpc8349eamds

{{Infobox BSP |BSP_name = mpc8349eamds |Manufacturer = Freescale |Board_URL = http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8349EMDShttp://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8349EMDS |image = MVME2700_L_833.jpg |Architecture = PowerPC |CPU_model = MPC8349E processor @533MHz |Simulator = No |RAM = X MByte DDR-1 333MHz (supports optional ECC memory) |NVMEM = 8Mbyte Flash (expandable) |Serial = EEPROM }}

hsc_cm01

TBD

Attachments (1)

Download all attachments as: .zip