Changes between Version 1 and Version 2 of TBR/BSP/Gen83xx


Ignore:
Timestamp:
Aug 13, 2008, 8:14:20 PM (11 years ago)
Author:
JoelSherrill
Comment:

Add some information

Legend:

Unmodified
Added
Removed
Modified
  • TBR/BSP/Gen83xx

    v1 v2  
    55
    66This BSP supports boards based on the Freescale MPC834x PowerQUICC II Pro microcontrollers.
     7= MPC8313E-RDB =
     8
     9
     10[[Image(MPC8313ERDB_PRODIMG.jpg)]]
     11
     12From: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8313E-RDB&fsrch=1
     13
     14The MPC8313E-RDB reference platform is ideal for hardware and software development for cost-optimized networking applications. The cost-effective MPC8313E communications processor family meets the requirements of several small office/home office (SOHO), printing, IP services and industrial control applications. It leverages Freescale’s highly integrated MPC8313E processor built on Power Architecture™ technology and leading-edge external components—a 5-port Gigabit Ethernet switch, USB port, one Peripheral Component Interconnect (PCI) slot, one MiniPCI slot and one SD card memory slot. The high level of integration in the MPC8313E helps to lower overall system costs, improve performance and simplify board design.
     15
     16
     17 *  CPU - Freescale MPC8313E running at 333/333 MHz (CPU/DDR2)
     18 *  Memory subsystem
     19  *  128 MByte unbuffered DDR2 SDRAM discrete devices
     20  *  8 MByte Flash single-chip memory
     21  *  32 MByte NAND Flash memory
     22  *  256 KBit M24256 serial EEPROM
     23  *  SD connector to interface with the SD memory card in SPI mode
     24
     25[[Image(MPC8313ERDB_BD.jpg)]]
     26
     27 *  Interfaces
     28  *  10/100/1000 BaseT Ethernet ports:
     29   *  eTSEC1, RGMII interface: five 10/100/1000 BaseT RJ-45 interfaces using Vitesse™ VSC7385 L2 switch
     30   *  eTSEC2, selectable RGMII or SGMII interface: one 10/100/1000 BaseT RJ-45 interface using Mavell™ 88E1111 PHY
     31  *  USB 2.0 port:
     32   *  High speed host/device USB interface: selectable on-chip PHY or external ULPI PHY interface by SMSC USB3300 USB PHY
     33  *  PCI: 32-bit PCI interface running at up to 66 MHz
     34   *  One 32-bit 3.3 V PCI slot connected to PCI bus
     35   *  One 32-bit 3.3 V miniPCI slot connected to PCI bus
     36  *  Dual UART ports:
     37   *  DUART interface: supports two UART up to 115200bps for console display
     38
     39 *  Board connectors
     40  *  LCD connectors by GPIO
     41  *  ATX power supply connector
     42  *  JTAG/COP for debugging