Version 2 (modified by Alani, on 06/11/07 at 16:43:06) (diff)

updated toolchain status


This is an evaluation Board from Analog Devices for the Blackfin 533 CPU. Information can be found here :

This BSP has a Console Driver for a the builtin Uart which supports polling or interrupted mode. It does also have a driver for core clock and timer. The BSP runs in supervisor mode.

The BSP executes on real hardware as well as on the skyeye simulator.

Skyeye Simulator

The Skyeye Simulator supports Timer and UART. The used skyeye configuration file is :


(25 October 2006)To the current CVS version needs the following patch to execute this BSP.


Thanks to Ralphs continous improvements on the RTEMS Toolchain packages you can download automatically generated RPMS of the toolchain from

If you do use a debian based distribution you might add a line like : <blockquote> deb unstable main </blockquote> to your apt.sources

If you want to build your toolchain by yourself : donwload binutils 2.17, gcc 4.2 and newlib 1.15, apply Ralfs patches from RTEMS CVS (inside the contrib directory) and compile the for the bfin-rtems target.

Hardware Debugging

During devolping of this BSP the Icebear JTAG adaptor has proved to be very helpful.


  • Proper support for Data and Instruction Cache
  • Filesystem support for the on-board flash
  • GDB Stub for debugging via Serial Port

Test Reports

CVS head -- (25 October 2006) Alain Schäfer reports sucessful execution of Hello, Ticker, Paranoia and other tests on the Hardware as well as on Skyeye