Changes between Initial Version and Version 1 of Packages/SNMP


Ignore:
Timestamp:
Dec 1, 2005, 10:32:38 AM (14 years ago)
Author:
ChrisJohns
Comment:

First pass at some doco.

Legend:

Unmodified
Added
Removed
Modified
  • Packages/SNMP

    v1 v1  
     1= SNMP =
     2
     3
     4!!! NetSNMP
     5
     6The NetSNMP package can be used with RTEMS to provide a full agent implementation. The NetSNMP project can be found at the following link -
     7
     8  http://net-snmp.sourceforge.net/
     9
     10NetSNMP implements the V1, V2 and V3 versions of the protocol which can be accessed through the SNMP library API. The package also implements a full agent and included in the agent is a MIB-II standard mib. RTEMS used the FreeBSD networking stack and part of this is the ''sysctl'' interface. NetSNMP can use this interface to obtain data about interfaces and networking stack.
     11
     12!! Building NetSNMP
     13
     14These instruction have been tested using RTEMS 4.6.x for the M68K Coldfire processor.
     15
     16# Download the NetSNMP package from the RTEMS FTP site (ftp://ftp.rtems.org/pub/rtems/4.6.99.2/contrib/net-snmp/).
     17# Unpack the source code.
     18# Create a build directory.
     19# Configure, name and install.
     20
     21  $ wget ftp://ftp.rtems.org/pub/rtems/4.6.99.2/contrib/net-snmp/rtems-net-snmp-5-0-8.tar.gz
     22  $ tar zxf rtems-net-snmp-5-0-8.tar.gz
     23  $ mkdir rtems-m68k
     24  $ cd rtems-m68k
     25  $ ../rtems-net-snmp-5-0-8/configure --target=m68k-rtems --prefix=/opt/rtems
     26  $ make
     27  $ make install
     28
     29I have only tested v1 and V2.
     30
     31!! Starting NetSNMP