Version 64 (modified by Jinyang, on Sep 12, 2013 at 11:49:33 AM) (diff)

/* Step 3: Build a Basic PCI-CAN device in qemu */

QEMU with CAN Emulation

Actually this is a project of GSoC2013. At first I try to port a CAN driver LinCAN to RTEMS. But we don't have a common hardwate platform to test the driver, so how to test the driver become the most significant problem here. Finaly we decide to build a software environment to test the dirver. This environment is built using the open source machine emulator QEMU and SJA1000 is simulated to test the driver. For the sake of simplicity, we test it in Linux and use SocketCAN as a driver.


  • Host: The host is Ubuntu-13.04 including the basic building tools and some other softwares.
  • Guest: This is also a Linux environment which we build from scratch. The linux kernel is Linux-3.4.48, the commands are statically compiled using Busybox-1.21.0 and also some other files including configure files, start scripts, etc.
  • Others: Qemu-1.4.2

Use Cases / Testing

The best option is to implement that as simple device

-chardev can,id=sja1000,port=vcan0 -device pci-can,chardev=sja1000

and use Linux mainlined SocketCAN API to connect virtual device to real CAN hardware (SocketCAN allows multiple applications access) or to SocketCAN Virtual CAN (vcan - TCP/IP lo equivalent). This is straightforward and would result in minimal overhead and latency.

The OS will be Linux and the current CAN driver to test will be Socket CAN (as it's maintlined into Linux)= Excerpts from the email chain =

Stefan Weil: PCI (and USB if they were supported with LinCAN) CAN controller boards could also be used with x86, so QEMU (with KVM) would be much faster and use lessresources than an ARM system emulation.

So one of the PCI controllers might be the best choice.

Select one with good documentation, complete implementation (on the RTEMS / LinCAN side) and small source code (which is typically an indicator for the complexity - a large complex driver typically also needs a complex emulation in QEMU).= Use Cases =

Paolo Bonzini and > Cynthia Rempel

we want to be able to verify a guest OS's CAN driver has been integrated

properly and is sending CAN packets...

Perhaps along the lines of two calls:

qemu-system-arm -hda linux1.img -can student-implemented-device

qemu-system-arm -hda linux2.img -can student-implemented-device

You would probably use either -net, or -netdev and -device (see docs/qdev-device-use.txt).

Then using a network protocol analyzer (such as Wireshark) with a custom

filter to recognize CAN packets,


qemu-system-arm -hda linux1.img -can student-implemented-device

then attaching a real CAN device to the host computer and verifying that the

output is being recognized be real hardware.

Is this CAN device just an Ethernet device? QEMU does not support other link-level protocols. Adding them would be possible and interesting, however it would add a bit to the complexity.

Whichever is more feasible to implement...

Both would be the same. In the first case, you'd probably use "-netdev socket" to share a virtual network between two virtual machines. In the second, you would use something like "-netdev tap" (again assuming it's just an Ethernet device).


Paulo B: Ok, learnt a bit more... You could probably implement this in two ways: 1) "-netdev socket" would probably work as a CAN->UDP gateway;

2) connecting to a virtual CAN interface in the host, created using SocketCAN (similar to "-netdev tap", e.g. "-netdev cantap").

In the first case, it would probably be useful to write the matching UDP->CAN gateway program.

In any case, you have to implement both the backend and the actual device.

Stefan Weil: I used TCP instead of UDP in a proprietary solution more than 10 years ago.

CAN devices are connected to CAN buses, so I had a CAN device emulation (on CAN API level, not on hardware level like with QEMU) and a CAN bus emulation.

The CAN bus emulation was a TCP server process. It could simulate several CAN buses.

Each CAN controller was a TCP client connected to the CAN bus emulation.

The TCP clients sent CAN data packets (length, packet type and data) to the TCP server and received such packets from the server. They also exchanged control packets with the server (topology = which bus, data rate, CAN filter settings).

The CAN bus emulation routed each received packet to other CAN controllers on the same bus (CAN is a broadcast protocol) and could also simulate error packets (for example when there was a mismatch of the data rates between sender and receiver). In debug mode, the bus emulation could also display the packets (raw data or CAN Open packets).

Several CAN vendors provide bidirectional CAN-Ethernet gateways, but I don't know whether there is a standard for CAN-over-Ethernet.

Andreas Färber: Unfortunately that is out of date as far as the code goes (QOM is our successor to qdev), but it might serve as a good starting point. I emailed you my KVM Forum slides on QOM with a device skeleton to use as a starting point.

One point I would like to point out is that QEMU devices don't simulate their hardware counterpart but instead only emulate them - that is, if you implement, e.g., a Freescale MPC5604B FlexCAN or Renesas RX62N RCAN controller you will deal with register accesses coming from the guest and their abstract concepts like mailboxes and objects rather than actual line-encodings. So if you want, you might get around some of the gory details by implementing the device using an abstract CANBus bus implementation (cf. PCIBus, I2CBus, etc.) and if necessary interfacing with whatever CAN API on the host directly; if you need to externalize this through a -chardev command line option for analysis, it probably requires some more work.

Pavel Pisa: 1) I think that for Linux the best option is to implement that as simple device

-device can-kvasser-pcican-q


-device pcican,model=kvasser-pcican-q

and use Linux mainlined SocketCAN API to connect virtual device to real CAN hardware (SocketCAN allows multiple applications access) or to SocketCAN Virtual CAN (vcan - TCP/IP lo equivalent). This is straightforward and would result in minimal overhead and latency.

2) If the portability is a problem, then we can create UDP socket and use it send CAN messages as packets (but it is newer able to model and pas over real CAN bus behavior, i.e. there are no silently lost messages on CAN side due to ACK). We have done prototype of SocketCAN to Ethernet gateway (in user-space and in Linux kernel) on contract with SocketCAN project. So we can offer some part of the code for reuse. Code is open/GPLed.

3) The option is to provide both above method or even pull in OrtCAN VCA (virtual can API) library which can route CAN messages to SocketCAN, LinCAN and possibly other targets.

Problem is that there is knowledge but amount of work could easily exceed RTEMS GSoC resources. So I would incline personally to 1). But opinions, help, documentation etc are welcomed.

Andreas Farber: While using a model property is not wrong per se, "can" seems too generic as type name, since it needs to inherit from a particular base class such as PCIDevice. QOM types can be made abstract to share code between device implementations to the same effect, e.g. PCIHostState.

Submitting a Patch to Qemu

fundamental requirements for new contributions:

Step 1: Building a Minimal Linux Environment in Qemu

The purpose of starting with a minimal Linux (as opposed to RTEMS) environment in qemu is the software configurations have been more thoroughly tested and documented. The first phase of the project should start out using the last stable release... unless it's minor digit is a 0... usually the minor digit being anything above a 0 means the free and open source software FOSS had some bug-fix releases.

CAN project example

The section below is largely based upon by Jin-Yang during the summer of 2013. The CAN simulation environment is based on QEMU-1.4.2, because 1.5.0 was just released, and we wanted a solid starting point.

Installing Qemu

The project is hosted in a public repository which the developer has access to. For Summer of Code projects for RTEMS, as of 2013, github was the preferred repository.

You can download the qemu-can project from or get a copy using the following command(Linux).

git clone .

NOTE: before you compile QEMU, "libglib2-dev" should be installed, or you will get the error "ERROR: glib-2.12 required to compile QEMU". In Ubuntu, to do that we use command sudo apt-get install libglib2-dev

First, we should configure QEMU using the following command, this will take about two minutes. QEMU has two modes to simulate a platform, the user mode and the system mode. We only need the i386 system simulation environment here, so only system mode (i386-softmmu) is needed. In order to save time, we just compile the source-code that relates to i386-softmmu.

Note: For simplicity of coding, we select the hard-coded --prefix=/opt/qemu so we can write scripts assuming that's where our installed qemu is.

./configure --prefix=/opt/qemu --target-list="i386-softmmu" --enable-sdl && make && sudo make install

  • --prefix: specify the location where you want to install.
  • --target-list: the platform you want to simulation, here we only need the i386-softmmu.
  • --enable-sdl: we also need the sdl (Simple DirectMedia? Layer) support.

To call the just installed qemu you can add /opt/qemu/bin to the PATH environment variable or just use /opt/qemu/bin/qemu-system-i386 to start QEMU.

Building Linux Environment

Building the Kernel

Again, choose a stable version of Linux for testing the simulation.

In this section, the environment is based on linux-3.4.48, busybox-1.21.0 and Ubuntu 13.04. You can get those source file from their official website.

The simplest way to compile a effective kernel is to generate a default one by typing make i386_defconfig; make bzImage. However, this will waste a lot of time on compiling and running something which we do not need. So, we build a minimal kernel through the following commands.

cd linux-3.4.48 make mrproper make allnoconfig make menuconfig # Note: Detailed instructions below make bzImage # make the kernel image make modules make modules_install INSTALL_MOD_PATH=temp find -name bzImage # find the kernel image cp ./arch/i386/boot/bzImage ~qemu/. # put in the working directory

Then, the modules has installed to temp directory.

In the 'make menuconfig' step we will chose

  • General setup
    • (-QEMU) Local version - append to kernel release

  • Enable loadable module support
    • Forced module loading
    • Module unloading

  • Bus options (PCI etc.)
    • PCI support
      • PCI Express support
        • Root Port Advanced Error Reporting support

  • Executable file formats / Emulations
    • Kernel support for ELF binaries

  • Networking support
    • Networking options
      • Packet socket
  • Unix domain sockets
    • TCP/IP networking
      • IP: multicasting
      • IP: advanced router
        • IP: policy routing
        • IP: equal cost multipath
        • IP: verbose route monitoring
      • IP: kernel level autoconfiguration
        • IP: DHCP support
        • IP: BOOTP support
        • IP: RARP support
      • IP: multicast routing
        • IP: PIM-SM version 1 support
        • IP: PIM-SM version 2 support
      • IP: TCP syncookie support
      • Large Receive Offload (ipv4/tcp)
      • TCP: advanced congestion control
        • CUBIC TCP
  • <M> CAN bus subsystem support
    • <M> Raw CAN Protocol (raw access with CAN-ID filtering)
    • <M> Broadcast Manager CAN Protocol (with contest filtering)
    • <M> CAN Gateway/Router? (with netlink configuration)
      • <M> Virtual Local CAN Interface (vcan)
      • <M> Platform CAN drivers with Netlink support
      • CAN bit-timing calculation
      • <M> Philips/NXP SJA1000 devices
      • <M> Kvaser PCIcanx and Kvaser PCIcan PCI Cards
      • CAN devices debugging messages

  • Device Drivers
    • Character devices
      • Serial drivers
        • <M> 8250/16550 and compatible serial support
    • Network device support
      • Network core driver support
      • Universal TUN/TAP device driver support
      • Ethernet driver support
        • Intel devices
          • Inter(R) PRO/1000 Gigabit Ethernet support
          • Inter(R) PRO/1000 PCI-Express Gigabit Ethernet support

  • File systems
    • Pseudo filesystems
      • Tmpfs virtual memory file system support (former shm fs)
        • Tmpfs POSIX Access Control List
    • Network File System
      • NFS client support
      • NFS client support for NFS version 3
      • NFS client support for the NFSv3 ACL protocol extension
      • NFS client support for NFS version 4
      • Root file system on NFS

Build a root file system in ~/qemu/rootfs

Build the basic commands through busybox

tar -xf busybox-1.20.0.tar.bz2 cd busybox-1.20.0 make defconfig make menuconfig # Note: Busybox Settings -> Build options -> Build Busybox as a static binary make make install CONFIG_PREFIX=~/qemu/rootfs # choose this hard coded value for simplicity when writing scripts

Set up network environment

We use TUN/TAP to connect host with qemu. We start by writing the ifup-qemu script. We will put it in the ~/qemu directory so it will be in the correct place relative to the other files.

#!/bin/sh # TUN/TAP to connect host with qemu ifconfig $1

Starting Custom Qemu

Finally, we can start our patched qemu by

TODO: ran into an error like: ~/qemu/ifup-qemu: could not launch network script qemu-system-i386: -net tap,vlan=0,ifname=tap0,script=~/qemu/ifup-qemu: Device 'tap' could not be initialized. Need to add instructions for permitting the TAP device to work...

/opt/qemu/bin/qemu-system-i386 -s -m 128 -kernel bzImage \

-append "notsc clocksource=acpi_pm root=/dev/nfs \ nfsroot= rw \ ip= \ init=/sbin/init" \ -net nic,model=e1000,vlan=0,macaddr=00:cd:ef:00:02:01 \ -net tap,vlan=0,ifname=tap0,script=~/qemu/ifup-qemu

Step 2: Introduce SocketCAN and SJA1000

We have built a minimal linux environment now. Before we built the PCI-CAN device in QEMU, we will introduce the Linux driver SocketCAN and CAN device SJA1000.


The SocketCAN package is an implementation of CAN protocols (Controller Area Network) for Linux. You can get a manual from the source of Linux Kernel at Documention/networking/can.txt .

Simplely, we only need to insert the vcan module. Following is what we need to do.

$ sudo insmod /lib/modules/uname -r/kernel/drivers/net/can/vcan.ko $ sudo ip link add type vcan $ sudo ip link set vcan0 up

Then you can check the CAN interface using command ifconfig vcan0 . You can test the can networking using can-utils, that you can get from .

./candump vcan0 # Observe vcan0 ./cangen vcan0 # Generate CAN message


The SJA1000, a stand-alone CAN controller, is produced by Philips Semiconductors which is more than a simple replacement of the PCA82C200. You can get more useful information from SJA1000 Datasheet and SJA1000 Application Note.

SJA1000 is intended to replace the PCA82C200 because it is hardware and software compatible. It has two modes including BasicCAN mode and PeliCAN mode.

Step 3: Build a Basic PCI-CAN device in qemu

We use QEMU Object Model(QOM, formerly Qdev) to simulate the SJA1000 hardware. You can get some useful information from QEMU Object Model which intruduce the QOM.

There are some files that need to be modified to make a basic PCI-CAN device: default-configs/pci.mak, hw/Makefile.objs, qemu-char.c, hw/can-pci.c.

  • default-configs/pci.mak add default compiling options
  • hw/Makefile.objs needs to be modified to add the object to the qemu build
  • qemu-char.c is the file that is used for the can-char driver
  • hw/can-pci.c is the can-pci device

The specification of the pci-can device lists in following.

Name : pci-can PCI ID : 1b36:beef PCI Region 0:

MEM bar, 128 bytes long, you can get the details about the memory map from SJA1000 Data Sheet.

You can get the device information using command info pci in monitor console. Those arguments are initialized in function can_pci_class_initfn() and can_pci_init().

Add the Default Compiling Files

We want to compile the PCI-CAN device as default. To achieve this goal, we add the following code.

# hw/Makefile.objs common-obj-$(CONFIG_CAN_PCI) += can-pci.o # default-configs/pci.mak CONFIG_CAN_PCI=y

Add the PCI-CAN structure

We can add a basic PCI-CAN device through the following code, the function can_pci_class_initfn() is used to initialize the device. There is a PCI TestDev in QEMU as a reference.

static const TypeInfo? can_pci_info = {

.name = "pci-can", .parent = TYPE_PCI_DEVICE, .instance_size = sizeof(PCICanState), .class_init = can_pci_class_initfn,

}; static void can_pci_register_types(void) {


} type_init(can_pci_register_types)

Add Start Options

When start QEMU, we can change the device properties through start options. Structure Property is used to set the device properties. There are some macros in hw/qdev-properties.h that help us to initialize the property. We take the following code as an example.

static Property can_pci_properties[] = {
    DEFINE_PROP_CHR("chardev",  PCICanState, state.chr),
	DEFINE_PROP_STRING("model",  PCICanState, model),
When start QEMU, we could change the PCI-CAN's properties through **chardev=xxx,model=xxxx**. The argument model is optinal, we use SJA1000 as default and only SJA1000 support now.
=  Add CAN back-end  =

Before add the function for SJA1000, we would introduce how to add the back-end in QEMU at first. To add the CAN back-end we should modefy the qemu-char.c file, this will be introduced step by step.
==  Change backend_table[]  ==

We should add a variable to backend_table[] to support a new backend just like following.
   { .name = "CAN",          .open = qemu_chr_open_can },
The qemu_char_open_can() function is used to initialize the backend including analyzing the start options, allocating some memory, opening the SocketCAN device, setting the CAN filter etc.
==  Add writing routine  ==

The writing routine is simple. We add the can_chr_write() function as writing routine.

Based upon,,


written by Jin Yang during the summer of 2013

==  hw/Makefile.objs  ==

To get qemu to recognize new source files, it's necessary to add the new source files to the system. Below is the change to the hw/Makefile.objs to get the qemu build system to recognize can-pci.o as one of the qemu objects.  For simplicity of the project, instead of implementing CONFIG_CAN, it is hard-coded to y. 

'''Possible Improvement:''' In later summers of code, $(CONFIG_CAN) could be made configurable, to ease getting accepted into the qemu head. This would require tracing down all the changes needed to implement CONFIG_CAN
  @@ -27,6 +27,7 @@ common-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
  common-obj-$(CONFIG_SERIAL) += serial.o serial-isa.o
  common-obj-$(CONFIG_SERIAL_PCI) += serial-pci.o
 +common-obj-y += can-pci.o
  common-obj-$(CONFIG_PARALLEL) += parallel.o
  common-obj-$(CONFIG_I8254) += i8254_common.o i8254.o
  common-obj-$(CONFIG_PCSPK) += pcspk.o
==   qemu-char.c  ==

The first part of the patch is a custom '''DPRINTF''' for testing out the can simulation.

 #define READ_BUF_LEN 4096
 @@ -99,6 +99,81 @@ 
 +#define DEBUG_CAN
 +#ifdef DEBUG_CAN
 +#define DPRINTF(fmt, ...) \
 +   do { fprintf(stderr, "[mycan]: " fmt , ## __VA_ARGS__); } while (0)
 +#define DPRINTF(fmt, ...) \
 +   do {} while (0)

can_chr_write prints out information to the terminal.
 +static int can_chr_write(CharDriverState *chr, const uint8_t *buf, int len)
 +  DPRINTF("%s-%s() called\n", __FILE__, __FUNCTION__);
 +    return 0;

prints a debugging message
 +static void can_chr_close(struct CharDriverState *chr)
 +  DPRINTF("%s-%s() called\n", __FILE__, __FUNCTION__);

prints a message, allocates a CharDriverState pointer, defines the chr_write and chr_close to be the debugging functions above.
 +static CharDriverState *qemu_chr_open_can(QemuOpts *opts)
 +    CharDriverState *chr;
 +    DPRINTF("%s-%s() called\n", __FILE__, __FUNCTION__);
 +    chr = g_malloc0(sizeof(CharDriverState));
 +    chr->chr_write = can_chr_write;
 +    chr->chr_close = can_chr_close;
 +    return chr;
Next, add a device to the character device table, so that the device can be called when qemu is called.

'''Note:''' add the use-case here.

 /* character device */
 @@ -2992,6 +3067,7 @@ static CharDriverState *qemu_chr_open_pp(QemuOpts *opts)
      { .name = "serial",    .open = qemu_chr_open_win },
      { .name = "stdio",     .open = qemu_chr_open_win_stdio },
 +    { .name = "can",       .open = qemu_chr_open_can },
      { .name = "file",      .open = qemu_chr_open_file_out },
      { .name = "pipe",      .open = qemu_chr_open_pipe },
      { .name = "stdio",     .open = qemu_chr_open_stdio },

<!-- ==== hw/can-pci.c ====

This adds the can-pci device

Include the simulations for the bus (pci), device type (char), timer functions, and the address-spaces (for memory-mapped io?)
 @@ -0,0 +1,193 @@
 +#include "pci/pci.h"
 +#include "char/char.h"
 +#include "qemu/timer.h"
 +#include "exec/address-spaces.h"

'''TODO:''' look up where these defines are from
 +#define PCI_MEM_SIZE				16
 +#define PCI_DEVICE_ID_CANBUS		0xbeef
 +#define PCI_REVISION_ID_CANBUS 		0x73 

+typedef struct CanState {
+	/* Some registers ... */
+    qemu_irq irq;
+	void 			*mem_base;
+    CharDriverState *chr;
+    MemoryRegion 	portio;
+    MemoryRegion 	memio;
+} CanState;
+typedef struct PCICanState {
+    PCIDevice 		dev;
+    CanState 		state;
+} PCICanState;
+#define DEBUG_CAN
+#ifdef DEBUG_CAN
+#define DPRINTF(fmt, ...) \
+   do { fprintf(stderr, "[mycan]: " fmt , ## __VA_ARGS__); } while (0)
+#define DPRINTF(fmt, ...) \
+   do {} while (0)
+const uint8_t whatever[] = "ttt";
+static void can_ioport_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+    CanState *s = opaque;
+    DPRINTF("write addr=0x%02x val=0x%02x\n", (unsigned int)addr, (unsigned int)val);
+	qemu_chr_fe_write(s->chr, whatever, 3); // write to the backends.
+static uint64_t can_ioport_read(void *opaque, hwaddr addr, unsigned size)
+	DPRINTF("%s-%s() called\n", __FILE__, __FUNCTION__);
+    return 0;
+const MemoryRegionOps can_io_ops = {
+    .read 		= can_ioport_read,
+    .write 		= can_ioport_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl 		= {
+        .min_access_size = 1,
+        .max_access_size = 1,
+    },
+static void can_mem_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) 
+    CanState 			*s = opaque;
+	void    			*pci_mem_addr;
+	int    				region_size;
+	pci_mem_addr = s->mem_base;  
+	pci_mem_addr = ((char *)pci_mem_addr) + addr;  
+	region_size  = (int)memory_region_size(&s->memio);
+	if(addr > region_size)
+		return ;
+	DPRINTF("write 0x%llx to %p\n", val, pci_mem_addr);
+	memcpy(pci_mem_addr, (void *)&val, size);	
+	DPRINTF("   pci_mem_addr 0x%llx\n", *(uint64_t *)pci_mem_addr);
+static uint64_t can_mem_read(void *opaque, hwaddr addr, unsigned size) 
+    CanState 			*s = opaque;
+	void    			*pci_mem_addr;  
+	int     			region_size;
+	unsigned int 		temp;
+	pci_mem_addr = s->mem_base;  
+	pci_mem_addr = ((char *)pci_mem_addr) + addr;  
+	region_size  = memory_region_size(&s->memio);
+	if(addr > region_size)  
+		return 0;
+	memcpy(&temp, pci_mem_addr, size);
+	DPRINTF("read %d bytes of 0x%x from %p\n", size, temp, pci_mem_addr);
+	return temp;
+static const MemoryRegionOps can_mem_ops = {  
+	.read 		= can_mem_read,  
+	.write 		= can_mem_write,  
+	.endianness = DEVICE_LITTLE_ENDIAN,
+    .impl 		= {
+		// how many bytes can we read/write every time.
+        .min_access_size = 1, 
+        .max_access_size = 16,
+    },
+static int can_pci_init(PCIDevice *dev)
+	// Get the address of PCICanState through PCIDevice.
+    PCICanState *pci = DO_UPCAST(PCICanState, dev, dev); 
+    CanState *s = &pci->state;
+	DPRINTF("%s-%s() called\n", __FILE__, __FUNCTION__);
+	if (!s->chr) {
+        fprintf(stderr, "Can't create can device, empty char device\n");
+		exit(1);
+    }
+	s->mem_base = g_malloc0(PCI_MEM_SIZE);
+    pci->dev.config[PCI_INTERRUPT_PIN] = 0x01;
+    s->irq = pci->dev.irq[0];
+	qemu_irq_lower(s->irq);
+    memory_region_init_io(&s->portio, &can_io_ops, s, "can", 8);
+    memory_region_init_io(&s->memio, &can_mem_ops, s, "can", PCI_MEM_SIZE);
+    pci_register_bar(&pci->dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->portio);
+    pci_register_bar(&pci->dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->memio);
+//    memory_region_add_subregion(system_io, base, &s->io);
+    return 0;
+static void can_pci_exit(PCIDevice *dev)
+    PCICanState *pci = DO_UPCAST(PCICanState, dev, dev);
+    CanState *s = &pci->state;
+    g_free(s->mem_base);
+    memory_region_destroy(&s->memio);
+    memory_region_destroy(&s->portio);
+static const VMStateDescription vmstate_pci_can = {
+    .name = "pci-can",
+    .version_id = PCI_REVISION_ID_CANBUS,
+    .minimum_version_id = 1,
+    .fields      = (VMStateField[]) {
+        VMSTATE_PCI_DEVICE(dev, PCICanState),
+    }
+static Property can_pci_properties[] = {
+    DEFINE_PROP_CHR("chardev",  PCICanState, state.chr),
+static void can_pci_class_initfn(ObjectClass *klass, void *data)
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass);
+    pc->init = can_pci_init;
+    pc->exit = can_pci_exit;
+    pc->vendor_id = PCI_VENDOR_ID_REDHAT; // 0x1b36
+    pc->device_id = PCI_DEVICE_ID_CANBUS;
+    pc->revision = PCI_REVISION_ID_CANBUS;
+    pc->class_id = PCI_CLASS_OTHERS;
+    dc->desc = "PCI CAN SJA1000";
+    dc->vmsd = &vmstate_pci_can;
+    dc->props = can_pci_properties;
+static const TypeInfo can_pci_info = {
+    .name          = "pci-can",
+    .parent        = TYPE_PCI_DEVICE,
+    .instance_size = sizeof(PCICanState),
+    .class_init    = can_pci_class_initfn,
+static void can_pci_register_types(void)
+    type_register_static(&can_pci_info);
The above is an OLD one. You can get some newer update at [ JinYang's Blog].
=  Running the Example  =

The following commands should be executed in host.
 $ sudo insmod /lib/modules/`uname -r`/kernel/drivers/net/can/vcan.ko
 $ sudo ip link add type vcan
 $ sudo link set vcan0 up
change your directory to can-utils,
 $ ./candump vcan0

then start qemu, and input the following commands.
<!-- where is the source code for a.out -->
 # cd /home/qemu_test_pci
 # ./load
 # ./a.out

you will get the output from "./candump vcan0" command, like following
  vcan0  123   [3]  12 34 56
  vcan0  12345678   [6]  12 34 56 78 90 AB

This means we send a SFF message and EFF message to the host through SocketCAN.
=  Step 4: Test  =

You can get the test environment form site ''''. There is a simple intruduce in README about what the files or directories for.
=  Start qemu  =

I write a simple start script for it, you can just type the following command to start it.
  sudo ./
=  Linux driver  =

Under source/ directory, there is a sub-directory linux_driver/ that contains the source code for linux driver. At first, some environment variables should be changed, details in README file. Then you can compile and copy it to the root file system through
  sudo ./
In qemu, change directory to /home/can_pci/basic/ and insert the linux driver by ''./load'', remove by ''./unload''.

=  Send routine  =

Still under source/examples directory, you can compile the source code by ''make'' and copy to root file system by ''sudo make install''. Then monitor the vcan0 in host by ''./candump vcan0'', and send the CAN message in QEMU by ''./send''. Finaly you will get the CAN message like following.

Monitor the vcan0 interface. 
  ~/can-utils$ ./candump vcan0
  open 0 'vcan0'
  using interface name 'vcan0'
  new index 0 (vcan0)
then send a CAN message in QEMU
  root:/home/can_pci/basic# ./send
finaly, get the message in host
  ~/can-utils$ ./candump vcan0
  open 0 'vcan0'
  using interface name 'vcan0'
  new index 0 (vcan0)
  vcan0 123 [3] 12 34 56     # this is the message we send.
=  Receive routine  =

After the above step, you can test receiving routine by ''./receive'' in QEMU and ''./cangen vcan0 -g 1000'' in host. Then you will get the CAN message in QEMU.

Start receiving routine in QEMU
send message in host
  ~/can-utils$ ./cangen vcan0 -g 1000 # send a CAN message per second.
then you will receive the CAN message in QEMU like
  761 [8] -SFF DAT- 4E 9C F1 05 72 8C FB 7E
  058 [4] -SFF DAT- 80 D6 B0 25
  2D4 [1] -SFF DAT- 55

= QEMU PCI-CAN device =

I have maitained a blog at [ Add pci-can]. There are a lots of temperay information, so I will update this at the end of the project. Then only useful message will be updated here.
= RTEMS environment =

You can get a basic simulation environment from This is a simple environment. However before run the RTEMS, environment variables 'PATH' and 'RTEMS_MAKEFILE_PATH' should be added to ~/.bashrc, such as
   export PATH=/opt/rtems-4.10/bin:${PATH}
   export RTEMS_MAKEFILE_PATH=/opt/rtems-4.10/i386-rtems4.10/pc386
Then, you can run it just using

Source file located at examples-v2/ and before runing, rtems-grub.cfg should be edited too.
= =Adding Qemu to the RTEMS Source Builder ==

Although not necessarily part of the CAN project one interesting issue that came up was the need to hook qemu into the RTEMS Source Builder for gcc-testing purposes.

The issues brought up with adding qemu to the RTEMS Source Builder included the question of how to build qemu on all supported host platforms, in particular, how to build qemu from source on Windows and Mac (in addition to Linux).

Some resources for building on Windows are:



Some resources for building on Mac are:
=  = References ==