Changes between Version 7 and Version 8 of Developer/Laboratory


Ignore:
Timestamp:
11/19/08 02:02:27 (15 years ago)
Author:
Mayes
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Developer/Laboratory

    v7 v8  
    22
    33
    4 OAR hosts the RTEMS Laboratory for the RTEMS Project.  It provides remote access to a collection of target boards for testing including the ability to remotely power the boards on and off.  The serial ports from the target boards and remote power control modules are offered over the network using the [http://sourceforge.net/projects/sercd sercd] package which implements the RFC2217 protocol for access to serial devices over a network.  Each control computer in the lab has a parallel port which may be used at some point in the future for BDM modules for boards that need those.  The preferred model for a board to operate is to provide a serial port console with a monitor for control and to download via the network.  The individual boards can then be configured to download from the RTEMS development machine england.
     4OAR hosts the RTEMS Laboratory for the RTEMS Project.  It provides remote access to a collection of target boards for testing including the ability to remotely power the boards on and off.  The serial ports from the target boards and remote power control modules are offered over the network using the [http://sourceforge.net/projects/sercd sercd] package which implements the RFC2217 protocol for access to serial devices over a network.  Each control computer, Wales and Germany, in the lab has a parallel port which may be used at some point in the future for BDM modules for boards that need those.  The preferred model for a board to operate is to provide a serial port console with a monitor for control and to download via the network.  The individual boards can then be configured to download from the RTEMS development machine, England.
    55
    6 The remote control power switches are Western Telematic RPB+ ([http://www.wti.com/guides/rpbp_b.pdf User's Guide].  On both wales and germnany, the RPB+ is connected to /dev/ttyS0 and offered on port 7000.
     6The remote control power switches are Western Telematic RPB+ ([http://www.wti.com/guides/rpbp_b.pdf User's Guide].  On both Wales and Germany, the RPB+ is connected to /dev/ttyS0 and offered on port 7000.
    77
    88NOTE: This lab is currently under development and all of the boards we have are not hooked up yet. If you would like to donate a board which uses a BSP in the RTEMS development tree for use in the lab, please contact [wiki:TBR/User/JoelSherrill JoelSherrill].