Changes between Version 12 and Version 13 of Boards/Zynq - Zedboard


Ignore:
Timestamp:
May 9, 2017, 6:57:12 AM (3 years ago)
Author:
Chris Johns
Comment:

Add a link to mkbootimage.

Legend:

Unmodified
Added
Removed
Modified
  • Boards/Zynq - Zedboard

    v12 v13  
    44
    55The page details how to run RTEMS on a [http://microzed.org/product/zedboard ZedBoard] and [http://microzed.org/product/microzed Microzed] board. The !ZedBoard and Microzed boards are supported by [http://www.denx.de/wiki/U-Boot U-Boot] and [http://www.denx.de/wiki/U-Boot U-Boot] can boot RTEMS. Please refer to the U-Boot documentation and the internet for documentation and example on using U-Boot. This page captures some examples on using U-Boot with these boards however is not all that can be done with U-Boot and running RTEMS.
     6
     7= First Stage Boot Loaders =
     8
     9The U-Boot bootloader comes with an FSBL. If you want to create one for yourself you can use the {{{mkbootimage}}} tool as an open source replacement for Xilinx's {{{bootgen}}} tool. The tool is available in github here https://github.com/kiwichris/zynq-mkbootimage.
    610
    711= Boot Mode =