Timeline



09/30/22:

21:07 Ticket #4730 (rtems-source-builder doesn't generate tar archives for all packages ...) closed by Chris Johns <chrisj@…>
fixed: In 953b839/rtems-source-builder: […]
21:07 Ticket #4726 (RSB decode exception stops build) closed by Chris Johns <chrisj@…>
fixed: In e04c841/rtems-source-builder: […]
20:23 Ticket #4730 (rtems-source-builder doesn't generate tar archives for all packages ...) reopened by Chris Johns
The RSB is now not installing packages or internally staging them.
20:19 Ticket #4731 (rtems-source-builder doesn't generate tar archives for all packages ...) closed by Chris Johns <chrisj@…>
fixed: In d592ee8/rtems-source-builder: […]
20:19 Ticket #4734 (RSB decode exception stops build) closed by Chris Johns <chrisj@…>
fixed: In af0f612/rtems-source-builder: […]
14:14 Changeset in rtems-central [e2b5c0e] by Sebastian Huber <sebastian.huber@…>
spec: Improve /rtems/config/if/* documentation
12:58 Changeset in rtems-central [be6962d] by Sebastian Huber <sebastian.huber@…>
spec: Add types to macros
12:53 Changeset in rtems [c6bd860] by Sebastian Huber <sebastian.huber@…>
rtems: Fix format
12:52 Changeset in rtems-docs [c98307c] by Sebastian Huber <sebastian.huber@…>
c-user: Add types to macros
11:20 Changeset in rtems-central [5e39be7] by Sebastian Huber <sebastian.huber@…>
spec: Unify interface functions and macros
07:52 Changeset in rtems-docs [bb9c38d] by Sebastian Huber <sebastian.huber@…>
c-user: INTERNAL_ERROR_NO_MEMORY_FOR_IDLE_TASK_STORAGE Document this fatal error.
07:09 Changeset in rtems-source-builder [369b60a]5 by Chris Johns <chrisj@…>
rtems/bsps: Optionally support arch/bsp if used Updates #4717
07:07 Changeset in rtems-source-builder [953b839] by Chris Johns <chrisj@…>
sb/set-bulder: Fix installing builds when a single buildset - Always stage a build - Install if installable and outter most buildset instance Closes #4730
07:07 Changeset in rtems-source-builder [d592ee8]5 by Chris Johns <chrisj@…>
sb/set-bulder: Fix installing builds when a single buildset - Always stage a build - Install if installable and outter most buildset instance Closes #4731
07:01 Changeset in rtems-source-builder [af0f612]5 by Chris Johns <chrisj@…>
sb/execute: Fix incremental decoder with --dry-run Closes #4734
07:01 Changeset in rtems-source-builder [e04c841] by Chris Johns <chrisj@…>
sb/execute: Fix incremental decoder with --dry-run Closes #4726
06:06 Changeset in rtems [45ee958] by Sebastian Huber <sebastian.huber@…>
config: Add CONFIGURE_IDLE_TASK_STORAGE_SIZE By default, allocate the IDLE task storage areas from the RTEMS Workspace. This avoids having to estimate the thread-local storage size in the default configuration. Add the application configuration option CONFIGURE_IDLE_TASK_STORAGE_SIZE to request a static allocation of the task storage area for IDLE tasks. Update #3835. Update #4524.
02:24 Ticket #4731 (rtems-source-builder doesn't generate tar archives for all packages ...) reopened by Chris Johns
This has broken staging for multiple packages in a top level buildset.

09/29/22:

23:13 Ticket #4733 (Set top in RSB version.py) closed by Chris Johns <chrisj@…>
fixed: In 08ca387/rtems-source-builder: […]
23:13 Ticket #4731 (rtems-source-builder doesn't generate tar archives for all packages ...) closed by Chris Johns <chrisj@…>
fixed: In 6f1e914/rtems-source-builder: […]
23:11 Ticket #4734 (RSB decode exception stops build) created by Chris Johns
Cloned from #4726: ---- Building in a Rocky VM on FB 12 with 5 I …
23:06 Ticket #4732 (Set top in RSB version.py) closed by Chris Johns
fixed: ​https://git.rtems.org/rtems-source-builder/commit/?id=cfed1659a297cb0f95a03e053345962097aa02bf
17:49 Packages/LWIP edited by Kinsey Moore
swap to master branch for the time being for consistency (diff)
16:11 Changeset in rtems [1d2fab8] by Alan Cudmore <alan.cudmore@…>
bsps: Improve riscv console FDT parsing This fixes a problem with parsing the FDT compatible property by replacing the RISCV_CONSOLE_IS_COMPATIBLE macro with calls to the fdt_stringlist_contains function. The macro only works when the compatible FDT entry is a single string and not a list of strings. The new call will compare each item in the string list. Close #4728.
13:35 Changeset in rtems [829e489] by Sebastian Huber <sebastian.huber@…>
stackchk: Add rtems_stack_checker_iterate()
12:34 Changeset in rtems [03ddd89] by Sebastian Huber <sebastian.huber@…>
stackchk: Avoid internal header file
11:40 Ticket #4730 (rtems-source-builder doesn't generate tar archives for all packages ...) closed by Chris Johns <chrisj@…>
fixed: In 336f15c/rtems-source-builder: […]
10:57 Changeset in rtems-source-builder [d7fb57f] by Chris Johns <chrisj@…>
sb/execute: Use a decoder that maintains state aross blocks Update #4726
10:57 Changeset in rtems-source-builder [ddfcc32]5 by Chris Johns <chrisj@…>
sb/execute: Use a decoder that maintains state aross blocks Update #4734
08:57 Changeset in rtems-source-builder [08ca387]5 by Chris Johns <chrisj@…>
sb/version: Set top from external package Closes #4733
08:57 Changeset in rtems-source-builder [cfed165] by Chris Johns <chrisj@…>
sb/version: Set top from external package
08:51 Changeset in rtems-source-builder [336f15c] by Chris Johns <chrisj@…>
sb/set-builder: Fix staging and tar file generation with a single config build Closes #4730
08:51 Changeset in rtems-source-builder [6f1e914]5 by Chris Johns <chrisj@…>
sb/set-builder: Fix staging and tar file generation with a single config build Closes #4731
08:15 Ticket #4733 (Set top in RSB version.py) created by Chris Johns
Cloned from #4732: ---- Setting the top lets the code be used in …
08:15 Ticket #4732 (Set top in RSB version.py) created by Chris Johns
Setting the top lets the code be used in deployment to get the version …
08:12 Ticket #4731 (rtems-source-builder doesn't generate tar archives for all packages ...) created by Christian Mauderer
Cloned from #4730: ---- Like discussed in the following mailing list …
08:10 Changeset in rtems-docs [a6c426d] by Sebastian Huber <sebastian.huber@…>
c-user: INTERNAL_ERROR_IDLE_THREAD_STACK_TOO_SMALL Document this fatal error.
08:07 Changeset in rtems-docs [36ae26d] by Sebastian Huber <sebastian.huber@…>
c-user: INTERNAL_ERROR_IDLE_THREAD_CREATE_FAILED Document this fatal error.
08:05 Changeset in rtems-docs [6ea95ab] by Sebastian Huber <sebastian.huber@…>
c-user: INTERNAL_ERROR_RTEMS_INIT_TASK_CONSTRUCT_FAILED Document this fatal error.
08:02 Changeset in rtems-docs [5eae93c] by Sebastian Huber <sebastian.huber@…>
c-user: Add CONFIGURE_IDLE_TASK_STORAGE_SIZE
08:01 Changeset in rtems-docs [278550b] by Sebastian Huber <sebastian.huber@…>
c-user: Add type roles
07:49 Ticket #4730 (rtems-source-builder doesn't generate tar archives for all packages ...) created by Christian Mauderer
Like discussed in the following mailing list thread, the …
07:25 Changeset in rtems-central [97236fd] by Sebastian Huber <sebastian.huber@…>
spec: Add CONFIGURE_IDLE_TASK_STORAGE_SIZE
05:47 Changeset in rtems [40eb58f] by Chris Johns <chrisj@…>
libmisc/rtems-fdt: Update to support 64bit addresses - Add support to get the parent address and size cells - Provide support to get a reg prop address map - Change getting a set of properties to uintptr_t - Improve the debug mode of the ls command to print all props Closes #4729
05:35 Ticket #4729 (Add 64bit address support to RTEMS FDT) created by Chris Johns
RTEMS's FDT wrapper does not handle the reg property correctly. …
01:31 Ticket #4728 (RISC-V console device tree parsing fails with a list of properties) created by Alan Cudmore
The riscv console configuration code uses a macro: #define …

09/28/22:

11:32 Changeset in rtems-central [b00ec1d] by Sebastian Huber <sebastian.huber@…>
spec: Add INTERNAL_ERROR_IDLE_THREAD_CREATE_FAILED
10:22 Changeset in rtems [1ab93ba] by Sebastian Huber <sebastian.huber@…>
score: INTERNAL_ERROR_IDLE_THREAD_CREATE_FAILED Add the INTERNAL_ERROR_IDLE_THREAD_CREATE_FAILED fatal error in case the creation of an idle thread fails. This may happen due to a failing create extension provided by the application.
07:58 Changeset in rtems-central [9ef0d1c] by Sebastian Huber <sebastian.huber@…>
rtems: Use ItemCache?.items_by_type
07:54 Changeset in rtems-central [25a92f7] by Sebastian Huber <sebastian.huber@…>
modules: Update rtems

09/27/22:

11:34 Changeset in rtems [8d44129d] by Sebastian Huber <sebastian.huber@…>
score: Simplify casts
06:52 Changeset in rtems [23cdecd8] by Sebastian Huber <sebastian.huber@…>
score: Require power of two CPU_STACK_MINIMUM_SIZE For most CPU ports this was already the case. This makes it possible to use the size as an object alignment using RTEMS_ALIGNED().
06:46 Changeset in rtems [b9212e2] by Sebastian Huber <sebastian.huber@…>
sptls01: Disable file system and Newlib reentrancy Update #4560.
06:40 Changeset in rtems [0307c81a] by Sebastian Huber <sebastian.huber@…>
sptls0*: Enable stack checker The thread-local storage area is located close to other stacks. Try to detect overwrites.
06:38 Changeset in rtems [dc54560] by Sebastian Huber <sebastian.huber@…>
sptls02: Fix alignment check
05:43 Changeset in rtems [4c89fbcd] by Sebastian Huber <sebastian.huber@…>
score: Add CPU_THREAD_LOCAL_STORAGE_VARIANT Update #3835.
00:30 Changeset in rtems-source-builder [161b7f1] by Joel Sherrill <joel@…>
rtems-gcc-12-newlib-head.cfg: Bump newlib hash to get extern C on resource.h

09/26/22:

21:45 Changeset in rtems-libbsd [f462c4d]6-freebsd-12 by Kinsey Moore <kinsey.moore@…>
rtemsbsd/arasan_sdhci: Improve board/eMMC compat This improves the compatibility of this driver across board and memory variants by avoiding use of the HISPD mode.
20:59 Changeset in rtems-libbsd [cf8fa08]6-freebsd-12 by Kinsey Moore <kinsey.moore@…>
rtemsbsd/arasan_sdhci: Remove redundant clock cap The BSD SD subsystem enforces a 50MHz clock cap for devices which don't report their own maximum clock speed. This setting is unnecessary for the Zynq 7000 version of this IP and restricts the Zynq Ultrascale+ MPSoC version of this IP without need since it reports its maximum speed as 200MHz.
20:57 Changeset in rtems-libbsd [452637a]6-freebsd-12 by Kinsey Moore <kinsey.moore@…>
rtemsbsd/arasan_sdhci: Update description This driver works on both the Zynq 7000 chips as well as the Zynq Ultrascale+ MPSoC chips and targets the Arasan SDHCI IP that exists in both.
20:52 Changeset in rtems-libbsd [ba1b041]6-freebsd-12 by Kinsey Moore <kinsey.moore@…>
rtemsbsd/arasan_sdhci: Stop masking capabilities The initial version of this driver was masking the capabilities register to hide 8 bit bus capability. This is not necessary since these devices report that capability correctly and the masking affects performance negatively on ZynqMP boards where the 8 bit bus is supported. This also removes two quirks that were made necessary by the capabilities masking.
15:51 Changeset in rtems [7842a333] by Kinsey Moore <kinsey.moore@…>
zynqmp: Add support for the CFC-400X This adds a BSP variant for the ZynqMP BSP family to support the Innoflight CFC-400X platform. To properly support the CFC-400X, device trees were added to the ZynqMP platform due to both the optional management interface as well as alternate physical configuration of the ethernet interfaces.
07:31 Changeset in rtems [2846b17] by Sebastian Huber <sebastian.huber@…>
config: Changeable size for IDLE stack allocator Allow the IDLE stack allocator to change the stack size. This can be used by applications with a very dynamic thread-local storage size to adjust the thread storage area of the IDLE tasks dynamically. Update #4524.
05:39 Ticket #4727 (RSB decode exception stops build) created by Chris Johns
Building in a Rocky VM on FB 12 with 5 I got: […] If the data is …
05:38 Ticket #4726 (RSB decode exception stops build) created by Chris Johns
Building in a Rocky VM on FB 12 with 5 I got: […] If the data is …
01:50 Ticket #4725 (Git commit message format instrunctions (cloned)) created by Chris Johns
The Eng docs …
01:48 Ticket #4724 (Git commit message format instructions) created by Chris Johns
The Eng docs …

09/24/22:

10:05 Changeset in rtems-central [20156cf] by Sebastian Huber <sebastian.huber@…>
spec: Place acfg options in acfg domain
09:46 Changeset in rtems-central [cf8c749] by Sebastian Huber <sebastian.huber@…>
spec: Remove "appl-config-group-member" role Replace it with "interface-ingroup".
08:44 Changeset in rtems-central [4145e0c] by Sebastian Huber <sebastian.huber@…>
items: Add items by type to item cache
08:43 Changeset in rtems-central [c9bb7de] by Sebastian Huber <sebastian.huber@…>
specview.py: Simplify
08:09 Changeset in rtems-source-builder [179d671] by Sebastian Huber <sebastian.huber@…>
6: Update GCC 10 and 12
08:09 Changeset in rtems-source-builder [462cc57] by Sebastian Huber <sebastian.huber@…>
6/7: Update Newlib This fixes a setjmp() and longjmp() issue for the 64-bit powerpc target.

09/23/22:

09:35 Ticket #4723 (Issue with NFSv4) created by Fabrizio Pirovano
We are testing NFSv4 on a coldfire mcf5329 platform using rtems-6 …
09:33 Changeset in rtems-central [57d44a1] by Sebastian Huber <sebastian.huber@…>
spec: Add justification for model test suite
09:28 Changeset in rtems-central [ea9ade1] by Sebastian Huber <sebastian.huber@…>
spec: Remove unused test suite
09:27 Changeset in rtems [a3717de] by Sebastian Huber <sebastian.huber@…>
validation: Remove unused test suite Update #3716.
09:26 Changeset in rtems-central [fcbbc39] by Sebastian Huber <sebastian.huber@…>
spec: Fix wording
09:10 Changeset in rtems-central [e18c077] by Sebastian Huber <sebastian.huber@…>
spec: Add "memory-benchmark" item type
08:53 Changeset in rtems-central [e54f6f1] by Sebastian Huber <sebastian.huber@…>
spec: Simplify leon3 BSP family shutdown
06:37 Changeset in rtems [962904c] by Sebastian Huber <sebastian.huber@…>
bsps: Fix format specifier Close #4722.
06:30 Ticket #4722 (Odd IDLE thread ID printing from various BSPs in minimum.exe) closed by Sebastian Huber <sebastian.huber@…>
fixed: In 962904c/rtems: […]

09/22/22:

15:09 Ticket #4722 (Odd IDLE thread ID printing from various BSPs in minimum.exe) created by Mohd Noor Aman
I have built a new aarch64 raspberry pi 4 BSP and while trying out the …
12:57 Changeset in rtems [9ed7103] by Sebastian Huber <sebastian.huber@…>
score: Simplify Chain_Node definition Fix documentation.
12:47 Changeset in rtems-central [9d04bd3] by Sebastian Huber <sebastian.huber@…>
spec: Fix typos
11:28 Changeset in rtems-central [05193bd] by Sebastian Huber <sebastian.huber@…>
modules: Update rtems
11:24 Changeset in rtems-central [1167cbc] by Sebastian Huber <sebastian.huber@…>
spec: Specify and test clock manager directives
11:19 Changeset in rtems [acf1e5b2] by Sebastian Huber <sebastian.huber@…>
rtems: Add rtems_clock_get_ticks_since_boot() function This function was declared, however, a definition was missing. Add a validation test for it.
11:06 Changeset in rtems [74a78fb] by Sebastian Huber <sebastian.huber@…>
rtems: Fix typo in rtems_build_name() definition
07:42 Ticket #4721 (Support tar along with pax) created by Chris Johns
Rocky 9 does not provide pax. Searching PowerTools and CRB repos …
07:17 Ticket #4720 (Backport rtems-tools fixes) created by Chris Johns
The devel branch hashes are: - …
06:26 Changeset in rtems [ade8d99] by Sebastian Huber <sebastian.huber@…>
build: Install SHA header files Update #3719.
05:56 Changeset in rtems [f6e7c627] by Sebastian Huber <sebastian.huber@…>
bsps/arm: Mark functions in start.S Add the function type to _start() and bsp_start_hook_0_done() so that the linker can generate ARM/Thumb interworking code. Update #4202.

09/21/22:

15:15 Changeset in rtems-source-builder [7cdb775] by Joel Sherrill <joel@…>
rtems-tools-6.cfg: Correct hash
13:37 Changeset in rtems-source-builder [928c15c] by Joel Sherrill <joel@…>
rtems-tools-6.cfg: Bump hash to avoid stray comma in aarch64.ini configuration for bsp-builder
13:31 Changeset in rtems-tools [d0a65c7] by Joel Sherrill <joel@…>
rtems-bsps-aarch64.ini: Remove trailing comma causing empty BSP name
03:55 Changeset in rtems-source-builder [ba4539b] by Chris Johns <chrisj@…>
rtems/kernel: Update to the latest - Addition of the Polarfire Icicle BSP

09/20/22:

15:30 Changeset in rtems [05461aa4]55.2 by Kinsey Moore <kinsey.moore@…>
cpukit/fdt: Free index before container Ensure that the index is released before the structure containing it is freed and NULLed. Updates #4460
15:30 Changeset in rtems [3af84c1] by Kinsey Moore <kinsey.moore@…>
cpukit/fdt: Free index before container Ensure that the index is released before the structure containing it is freed and NULLed. Updates #4460
15:24 Changeset in rtems [584f5bc9] by Kinsey Moore <kinsey.moore@…>
cpukit/fdt: Check correct allocation The second allocation check was mistakenly rechecking the first allocation. It now checks the correct allocation and ensures that names is not NULL. Updates #4462
15:24 Changeset in rtems [cab00c70]5 by Kinsey Moore <kinsey.moore@…>
cpukit/fdt: Check correct allocation The second allocation check was mistakenly rechecking the first allocation. It now checks the correct allocation and ensures that names is not NULL. Updates #4462
11:45 Changeset in rtems [3edf9cb] by Sebastian Huber <sebastian.huber@…>
bsps/arm: Move bsp_start_hook_0_done() Declare bsp_start_hook_0_done() in <bsp/start.h>.
11:18 Changeset in rtems [80be0de4] by Sebastian Huber <sebastian.huber@…>
bsps/arm: Add comment about banked FIQ registers
08:33 Changeset in rtems [63cf5833] by Sebastian Huber <sebastian.huber@…>
bsp/tms570: Fix TMS570_USE_HWINIT_STARTUP Make sure only one module is built which defines bsp_start_hook_0().
08:31 Changeset in rtems [f3f5b27] by Sebastian Huber <sebastian.huber@…>
bsp/tms570: Fix declarations This avoids multiple definition errors.

09/19/22:

15:00 Ticket #4719 (risc-v fe310 console driver uart read error) closed by Alan Cudmore <alan.cudmore@…>
fixed: In 88f4d44f/rtems: […]
13:00 Changeset in rtems [d0b92735] by Padmarao Begari <padmarao.begari@…>
bsps/shared/: Use device tree blob If the bsp is integrated and supported a device tree blob(dtb) then use dtb instead of using it from the U-Boot (BSP_START_COPY_FDT_FROM_U_BOOT=False).
13:00 Changeset in rtems [6b0d3c9] by Padmarao Begari <padmarao.begari@…>
bsps/riscv: Add Microchip PolarFire? SoC BSP variant The Microchip PolarFire? SoC support is implemented as a riscv BSP variant to boot with any individual hart(cpu core) or SMP based on the boot HARTID configurable and support components are 4 CPU Cores (U54), Interrupt controller (PLIC), Timer (CLINT), UART.
13:00 Changeset in rtems [974c6ea] by Padmarao Begari <padmarao.begari@…>
spec/build/bsps: Add dtb support Add dtb and dtb header path configurable build option
13:00 Changeset in rtems [9cdc008] by Padmarao Begari <padmarao.begari@…>
bsps/riscv: Add device tree blob Add the basic Microchip PolarFire? SoC device tree source and blob The mpfs-dtb.h is generated by the bin2hex ​https://github.com/padmaraob/bin2hex 1.Compile and build the bin2hex.c $ gcc -o bin2hex bin2hex.c 2.Generate the mpfs.dtb from the mpfs.dts $ dtc -O dtb -o mpfs.dtb mpfs.dts 3.Generate the mpfs-dtb.h Header file from the mpfs.dtb. $ ./bin2hex mpfs.dtb
11:51 Changeset in rtems [9a55120] by Sebastian Huber <sebastian.huber@…>
bsp/tms570: Add -mbe32 to LINKFLAGS There is not just big-endian on ARM. We have two variants BE32 (obsolete) and BE8. The Cortex-R5F processor supports only BE8, however, some TMS570 variants are BE32 internally. In GCC 8 and later, the --be8 option is passed to the linker based on the selected architecture or CPU. Use BE32 by default for the TMS570 BSP. In GCC, see: commit 63d03dcecdafe34715282a5155cfc2162375feca Author: Richard Earnshaw <rearnsha@…> Date: Mon Jul 3 13:22:05 2017 +0000 [arm] Clean up generation of BE8 format images.
07:01 Ticket #3935 (Remove use of RTEMS_INLINE_ROUTINE in the RTEMS sources) closed by Sebastian Huber <sebastian.huber@…>
fixed: In a660e9dc/rtems: […]
Note: See TracTimeline for information about the timeline view.