Context Navigation

06:25 Changeset in rtems [39f64e08]5 by David Gibson <david@…>: libfdt: Allow #size-cells of 0 c12b2b0c20eb "libfdt: fdt_address_cells() and fdt_size_cells()" introduced a bug as it consolidated code between the helpers for getting #address-cells and #size-cells. Specifically #size-cells is allowed to be 0, and is frequently found so in practice for /cpus. IEEE1275 only requires implementations to handle 1..4 for #address-cells, although one could make a case for #address-cells == #size-cells == 0 being used to represent a bridge with a single port. While we're there, it's not totally obvious that the existing implicit cast of a u32 to int will give the correct results according to strict C, although it does work in practice. Straighten that up to cast only after we've made our range checks. Reported-by: yonghuhaige via https://github.com/dgibson/dtc/issues/28 Signed-off-by: David Gibson <david@…>
04:55 Ticket #3776 (libdl ARM does not support ARM mode trampolines.) created by Chris Johns: The BBB is ARM mode and crashes dl09.exe. This is due to only Thumb …

07/27/19:

23:17 Ticket #3775 (libdl does not handle ARM mode reloc tramp parsing) closed by Chris Johns <chrisj@…>: fixed: In 5a678de/rtems: […]
23:13 Ticket #3775 (libdl does not handle ARM mode reloc tramp parsing) created by Chris Johns: The BBB fails on libdl tests because the trampoline parsing of reloc …
23:12 Changeset in rtems [5a678de]5 by Chris Johns <chrisj@…>: libdl/arm: Fix ARM mode trampoline parsing of relocs - No need to dump globals syms in test dl01 when tracing Closes #3775
00:28 Ticket #3774 (RPi2 SMP does not build) created by Chris Johns: […] Configured with ... […]

07/26/19:

14:36 Changeset in rtems [036717ed]5 by Sebastian Huber <sebastian.huber@…>: record: Add support for thread names
07:25 Ticket #3773 (RPi fails to boot) closed by Sebastian Huber <sebastian.huber@…>: fixed: In 1e6380b/rtems: […]
06:12 Changeset in rtems [1e6380b]5 by Sebastian Huber <sebastian.huber@…>: bsps/arm: Move HYP to SVC change to start.S This fixes the corruption of r3 by the call to bsp_start_arm_drop_hyp_mode(). Moving the code makes it easier to review changes in start.S. Close #3773.
05:59 Changeset in rtems [0ee2125]5 by Sebastian Huber <sebastian.huber@…>: bsps/arm: Move register init to start.S This makes it easier to review changes in start.S. Update #3773.
05:54 Changeset in rtems [0f5c1d53]5 by Sebastian Huber <sebastian.huber@…>: bsps/arm: Remove register init for ARMv7-M There are no known ARMv7-M chips with a dual lockstep mode. Update #3773.
00:44 Changeset in rtems-tools [30a5cd6]5 by Chris Johns <chrisj@…>: tester: Add raspberrypi2 BSP.
00:31 Ticket #3773 (RPi fails to boot) created by Chris Johns: The RPi BSP fails to boot with the current master. A bsect of the repo …

07/25/19:

08:20 Changeset in rtems-libbsd [989e2dd]5 by Sebastian Huber <sebastian.huber@…>: CONFIG_INTRHOOK(9): Call handlers after boot This enables adding drivers on demand which use this service after initialization.
08:20 Changeset in rtems-libbsd [aedff4f]5-freebsd-126-freebsd-12 by Sebastian Huber <sebastian.huber@…>: CONFIG_INTRHOOK(9): Call handlers after boot This enables adding drivers on demand which use this service after initialization.
05:51 Changeset in rtems-source-builder [639eed3]5 by Sebastian Huber <sebastian.huber@…>: 6: Update unstable RTEMS 6 tool chain
05:48 Changeset in rtems-source-builder [f79e33f3]5 by Sebastian Huber <sebastian.huber@…>: 6: Fix install root
02:36 GSoC/2019 edited by Ravindra Kumar Meena: (diff)

07/24/19:

21:54 Ticket #3772 (missaligned pointer dereference in ...) created by Jeffrey Hill: nios2-rtems4.11-gcc (GCC) 4.9.3 20150626 (RTEMS 4.11, RSB no-repo, …
14:06 Changeset in rtems-source-builder [0e59b48]5 by Sebastian Huber <sebastian.huber@…>: 6: Update unstable RTEMS 6 tool chain
13:42 Changeset in rtems-docs [735bcd7]5 by Sebastian Huber <sebastian.huber@…>: eng: Add bibliography
13:37 Changeset in rtems-docs [d412c5b]5 by Sebastian Huber <sebastian.huber@…>: eng: Add Software Requirements Engineering chapter Update #3715.
10:52 Ticket #3771 (JFFS2 file system integration with External QSPI Flash CRC failure ...) closed by Sebastian Huber: invalid: Please use the mailing lists for these kinds of problems. I suggest you remove the flash simulator code from the example.
10:47 Ticket #3771 (JFFS2 file system integration with External QSPI Flash CRC failure ...) created by Karthikeyan: Hardware Configuration Setup: Controller: STM32H7 Rtems : 4.11 …
08:50 Changeset in rtems-docs [7888904]5 by Sebastian Huber <sebastian.huber@…>: refs: Update EARS references
07:15 Changeset in rtems [cdac3ca] by Christoph Hellwig <hch@…>: jffs2: Remove jffs2_gc_fetch_page and jffs2_gc_release_page Merge these two helpers into the only callers to get rid of some amazingly bad calling conventions. Suggested-by: Al Viro <viro@…> Signed-off-by: Christoph Hellwig <hch@…> Signed-off-by: Richard Weinberger <richard@…>
05:01 Ticket #3763 (RSB SIS build fails on FreeBSD) closed by Chris Johns <chrisj@…>: fixed: In 5eb4282/rtems-source-builder: […]
02:46 Changeset in rtems [9d9bfe59] by Jia-Ju Bai <baijiaju1990@…>: jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree() In jffs2_add_frag_to_fragtree(), there is an if statement on line 223 to check whether "this" is NULL: if (this) When "this" is NULL, it is used at several places, such as on line 249: if (this->node) and on line 260: if (newfrag->ofs > this->ofs) Thus possible null-pointer dereferences may occur. To fix these bugs, -EINVAL is returned when "this" is NULL. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai <baijiaju1990@…> Signed-off-by: Richard Weinberger <richard@…>

07/23/19:

13:41 Changeset in rtems [57e01735]5 by Vaibhav Gupta <vaibhavgupta40@…>: psxtests: Add ndbm test suite Joel Sherrill <joel@…> modified the patch to add autoconf logic to avoid building this new test unless the tool chain include <ndbm.h>. The ensures that git bisect continues to work and that the addition of this test does not immediately force the entire community to update their tools.
11:47 Changeset in rtems-source-builder [5eb4282]5 by Chris Johns <chrisj@…>: devel/sis: Fix building the SIS on FreeBSD - Update to SIS 2.17 which has internal readline support for the hosts which do not have readline. Closes #3763
07:39 Changeset in rtems-docs [e859242]5 by Sebastian Huber <sebastian.huber@…>: refs: Replace non-ASCII character

Note: See TracTimeline for information about the timeline view.

Download in other formats:

RSS Feed