Timeline




matching tags

Oct 7, 2017:

8:34 PM Ticket #3171 (RSB GCC does not build on High Sierra and APFS) created by Chris Johns
The issue has been reported upstream as …
7:57 AM Changeset in rtems-tools [9580804] by Chris Johns <chrisj@…>
Add a target start and target reset to manage boards that do not boot cleanly. Rename the reset regex as start regex to detect a board has started. Add a reset regex to detect if a board has failed to boot cleanly and needs to be reset. The Microzed I have can fail to boot. The PHY does not initalise. I do not know if it is the board, the design or u-boot.

Oct 6, 2017:

7:41 PM Ticket #3158 (Examples v2 does not build) reopened by Joel Sherrill
I think this is still broken for me. I did a "git module update" and it didn't seem to pull anything. The configure was this: ./waf configure --rtems=$HOME/rtems-work/tools/4.12/bsps \ --rtems-tools=$HOME/rtems-work/tools/4.12 \ --rtems-bsps=sparc/erc32 I did "./wak -k" and multiple tests do not build currently. I cd'ed to file_io/crc and then did this: $ ../../waf clean 'clean-sparc-rtems4.12-erc32' finished successfully (0.065s) [joel@localhost crc]$ ../../waf Waf: Entering directory `/home/joel/rtems-work/examples-v2/build/sparc-rtems4.12-erc32' [0/2] Compiling rootfs/image.img [1/2] Compiling ../../build/sparc-rtems4.12-erc32/file_io/crc/fs-root.tar [2/6] Compiling crc_32.c [3/6] Compiling ../../build/sparc-rtems4.12-erc32/file_io/crc/fs-root-tar.c [4/6] Compiling init.c ../../file_io/crc/init.c:18:10: fatal error: FilesystemImage?.h: No such file or directory #include "FilesystemImage?.h" compilation terminated. Waf: Leaving directory `/home/joel/rtems-work/examples-v2/build/sparc-rtems4.12-erc32' Build failed -> task in 'crc.exe' failed with exit status 1 (run with -v to display more information) I did a "git submodule deinit ." and reinitialized the modules but that didn't help either.
6:00 PM Changeset in rtems [098b67b] by Sebastian Huber <sebastian.huber@…>
posix: Resurrect signal support This was accidentally removed during a merge conflict by 89fc9345dea5c675f8d93546fa3c723918d3279a.
1:41 PM Changeset in rtems [65012bf] by Sebastian Huber <sebastian.huber@…>
score: Change Timestamp_Control to sbintime_t The timestamp are based on the uptime. There is no need for a 64-bit seconds part. The signed 32-bit seconds part of the sbintime_t limits the uptime to roughly 68 years. Close #2740.
1:30 PM Changeset in rtems [2256946] by Sebastian Huber <sebastian.huber@…>
score: Use struct timespec for TOD Use the timestamps only for uptime based values. Use struct timespec for the absolute time values (TOD). Update #2740.
1:00 PM Changeset in rtems [c0623a99] by Sebastian Huber <sebastian.huber@…>
score: Simplify _Timestamp_Add_to() Update #2740.
12:48 PM Ticket #3142 (POSIX: Reduce size of pthread_once_t and make it zero-initialized) closed by Sebastian Huber
fixed: Fixed with latest RSB.
12:29 PM Changeset in rtems-docs [d8f7bdc] by Sebastian Huber <sebastian.huber@…>
c-user: Add obsolete configuration options section Update #2493. Update #3112. Update #3113. Update #3114. Update #3115. Update #3116.
12:20 PM Changeset in rtems [587afc3] by Sebastian Huber <sebastian.huber@…>
confdefs: Fix typo
12:00 PM Changeset in rtems-docs [265cc70] by Sebastian Huber <sebastian.huber@…>
c-user: Clarify that confdefs.h is mandatory
11:47 AM Ticket #3166 (New default ticket assignee: NeedsReview) closed by Sebastian Huber
fixed: I removed the default owner for all components.
10:03 AM Changeset in rtems [b39cda6] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Fix I2C registration with path Update #3090.
9:02 AM Changeset in rtems [54380f42] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add imx_iomux_configure_pins() Update #3090.
8:09 AM Changeset in rtems [e316be7] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Import iomux from FreeBSD Update #3090.
8:07 AM Changeset in rtems [af9115f3] by Sebastian Huber <sebastian.huber@…>
posix: Simplify POSIX_API_Control Return stack area via pthread_getattr_np(). Simplify * pthread_attr_setaffinity_np(), and * pthread_attr_getaffinity_np() and let the scheduler do the more sophisticated error checks. Make * pthread_setaffinity_np(), * pthread_getaffinity_np(), * pthread_attr_setaffinity_np(), and * pthread_attr_getaffinity_np() available in all configurations. Update #2514. Close #3145. Close #3168.
7:42 AM Changeset in rtems [900fda45] by Sebastian Huber <sebastian.huber@…>
rtems: Fix format warnings Update #3111.
7:16 AM Changeset in rtems [4e38aed] by Sebastian Huber <sebastian.huber@…>
libdl: Use 64-bit ELF on 64-bit targets Update #3155.
6:32 AM Changeset in rtems [8bdbefe] by Sebastian Huber <sebastian.huber@…>
libdl: Fix warnings Update #3155.
4:02 AM Ticket #3170 (Use BSP_output_char via RTEMS printer or simple console driver for ...) created by Chris Johns
Test runs with a interrupt driven console driver result in unreliable …

Oct 5, 2017:

9:34 PM Ticket #3159 (Examples v2 trace linker ini files reference non-existing dump-on-error) closed by Chris Johns
fixed: Replying to Joel Sherrill: > This still fails for me. Did you actually push the fix? https://git.rtems.org/examples-v2/commit/?id=c7dfbaf83c5b119106f9ee38c902988cc463b0aa It removes the dump-on-error issue which is the subject of this ticket. Are you seeing #3160?
9:33 PM Ticket #3169 (Trac view change set results in a Trac error.) created by Chris Johns
https://devel.rtems.org/changeset/c7dfbaf83c5b119106f9ee38c902988cc463b
2:07 PM Ticket #3159 (Examples v2 trace linker ini files reference non-existing dump-on-error) reopened by Joel Sherrill
This still fails for me. Did you actually push the fix? I fixed a few other examples-v2 failures. But these remain: -> task in 'hello-deep.texe' failed with exit status 10 (run with -v to display more information) Looks like missing update from recent changes. -> task in 'fat_ramdisk.texe' failed with exit status 10 (run with -v to display more information) Looks like missing update from recent changes. -> task in 'fdopen.texe' failed with exit status 10 (run with -v to display more information) Not building filesystem image -> task in 'crc.exe' failed with exit status 1 (run with -v to display more information) Not building filesystem image -> task in 'psx_sched_report.exe' failed with exit status 1 (run with -v to display more information) RTEMS confdefs.h and newlib libc.a both define getreent.
2:03 PM Changeset in examples-v2 [9614ea5] by Joel Sherrill <joel@…>
ticker/low_ticker2/init.c: Add include <rtems/bspIo.h>
2:03 PM Changeset in examples-v2 [349d369] by Joel Sherrill <joel@…>
ticker/low_ticker1/init.c: Add include <rtems/bspIo.h>
2:03 PM Changeset in examples-v2 [10a452f] by Joel Sherrill <joel@…>
ticker/low_ticker/init.c: Add include <rtems/bspIo.h>
2:03 PM Changeset in examples-v2 [18479a3] by Joel Sherrill <joel@…>
led/complex1/MessageQueueT.h: Add include <cstring>
1:59 PM Changeset in examples-v2 [45bf0f4] by Joel Sherrill <joel@…>
Add C11 Threading Examples
1:28 PM Ticket #3168 (Simplify POSIX_API_Control) created by Sebastian Huber
There is no need to have a copy of the thread attributes used for the …
12:23 PM Changeset in rtems [e46a075] by Sebastian Huber <sebastian.huber@…>
Enforce compatible Newlib version This Newlib check ensures that we have a 64-bit time_t and self-contained POSIX synchronization objects. Update #2514. Update #3111. Update #3112. Update #3113. Update #3114. Update #3115. Update #3116.
7:46 AM Ticket #3167 (Internal status codes must not depend on RTEMS_POSIX_API) closed by Sebastian Huber <sebastian.huber@…>
fixed: In 5cf5d46e/rtems: […]
7:44 AM Changeset in rtems [5cf5d46e] by Sebastian Huber <sebastian.huber@…>
score: Make status codes unconditional The internal status codes encode a Classic rtems_status_code and error codes used by the POSIX and C11/C++11 APIs. In case the POSIX API is disabled, the C11/C++11 support must still work. Close #3167.
7:24 AM Ticket #3167 (Internal status codes must not depend on RTEMS_POSIX_API) created by Sebastian Huber
The internal status codes encode a Classic rtems_status_code and error …
6:19 AM Changeset in rtems-source-builder [76d9db3] by Sebastian Huber <sebastian.huber@…>
4.12: Update to Newlib 2.5.0.20170922 The time_t is now a 64-bit signed integer. This update includes a patch to introduce the self-contained POSIX synchronization objects. Update #2514. Update #3111. Update #3112. Update #3113. Update #3114. Update #3115. Update #3116.
3:24 AM Changeset in rtems-tools [68cbfc3] by Chris Johns <chrisj@…>
tester: Add Zedboard.
3:21 AM Changeset in rtems-tools [2ae9b6d] by Chris Johns <chrisj@…>
tester: Telnet console reopens the connection if it fails or closes. Some hardware can drop a USB serial enumeration when power is remove or applied. This changes make the telnet console more fault tolerant.
3:21 AM Changeset in rtems-tools [0737b46] by Chris Johns <chrisj@…>
tester: Add a target reset regular expression to detect a reset.

Oct 4, 2017:

7:48 PM Ticket #3157 (PowerPC tools don't build on 32-bit hosts) reopened by Jeff Mayes
OK. There are no RTEMS tools in my path. I deleted the build folder in my working dir and tried again. I also changed the #PREFIX to use a different directory. It still fails with the same error as reported. Any other ideas? Thanks
4:25 PM Ticket #3166 (New default ticket assignee: NeedsReview) created by Sebastian Huber
We have to many tickets with an unclear state if someone is working on …
4:23 PM Ticket #3165 (Rework components of the ticket system) created by Sebastian Huber
A look at https://devel.rtems.org/milestone/4.12.0 reveals that the …
12:15 PM Changeset in rtems-libbsd [b8fdbe2]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Use RACC[SHIFT16] This avoids the move of entire receive frames to meet the alignment requirements of the IP header and so on. Add FECFLAG_RACC feature flag for this similar to the Linux driver. Update #3090.
7:26 AM Ticket #3164 (aio_cancel() does not destroy the corresponding condition variables) closed by Sebastian Huber <sebastian.huber@…>
fixed: In c139a70/rtems: […]
7:18 AM Changeset in rtems [c139a70]4.11 by Sebastian Huber <sebastian.huber@…>
posix: Fix aio_cancel() Close #3164.
7:18 AM Changeset in rtems [dcdd329] by Sebastian Huber <sebastian.huber@…>
posix: Fix aio_cancel() Update #3164.
7:18 AM Ticket #3164 (aio_cancel() does not destroy the corresponding condition variables) created by Sebastian Huber
5:24 AM Changeset in rtems [170df3d] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add SPI bus driver Update #3090.

Oct 3, 2017:

2:54 PM Developer/Coding/Doxygen edited by Gedare Bloom
Remove link to deleted page GCI/Projects. (diff)
2:48 PM GCI edited by Gedare Bloom
Comment out the manual way, and uncomment the automated way. (diff)
2:45 PM GCI edited by Joel Sherrill
Merge GCI/Projects (diff)
4:20 AM Boards/Beagle Board edited by Chris Johns
Minor edits. (diff)
4:08 AM Boards/Beagle Board created by Chris Johns
Initial page.

Oct 2, 2017:

11:47 AM Ticket #3161 (I2C EEPROM driver uses incorrect address format) closed by Sebastian Huber
fixed: [8ca15e26ba98f172ee1396f34269ca664925427d/rtems]
11:47 AM Ticket #3162 (I2C EEPROM driver uses incorrect program timeout handling) closed by Sebastian Huber <sebastian.huber@…>
fixed: In 1a21831/rtems: […]
11:41 AM Ticket #3163 (Add I2C device driver for temperature sensor LM75A) closed by Sebastian Huber <sebastian.huber@…>
fixed: In 4cfce5c/rtems: […]
11:40 AM Ticket #3163 (Add I2C device driver for temperature sensor LM75A) created by Sebastian Huber
11:28 AM Changeset in rtems [1a21831]4.11 by Sebastian Huber <sebastian.huber@…>
i2c: Fix EEPROM driver program timeout handling The RTEMS_MILLISECONDS_TO_TICKS() macro doesn't round up. Do not use it to calculate the program timeout in ticks. Check program done condition after the timeout check to account for pre-emptions. Close #3162.
11:28 AM Changeset in rtems [9c063df] by Sebastian Huber <sebastian.huber@…>
i2c: Fix EEPROM driver program timeout handling The RTEMS_MILLISECONDS_TO_TICKS() macro doesn't round up. Do not use it to calculate the program timeout in ticks. Check program done condition after the timeout check to account for pre-emptions. Update #3162.
11:28 AM Ticket #3162 (I2C EEPROM driver uses incorrect program timeout handling) created by Sebastian Huber
The RTEMS_MILLISECONDS_TO_TICKS() macro doesn't round up. Do not use …
11:06 AM Changeset in rtems [2e1d595] by Sebastian Huber <sebastian.huber@…>
i2c: Send MSB of address first for EEPROMs Update #3161.
11:06 AM Changeset in rtems [8ca15e26]4.11 by Sebastian Huber <sebastian.huber@…>
i2c: Send MSB of address first for EEPROMs Close #3161.
9:02 AM Ticket #3161 (I2C EEPROM driver uses incorrect address format) created by Sebastian Huber
The I2C EEPROM driver must send the MSB of the address bytes first.
7:57 AM Changeset in rtems-libbsd [d18c643]5-freebsd-12 by Christian Mauderer <Christian.Mauderer@…>
Allow to set optimization level during configure. This allows to set the optimization level for libbsd via a configure switch. Useful for building with for example no optimization during debug or with size optimization for space restricted targets.
12:14 AM Ticket #3159 (Examples v2 trace linker ini files reference non-existing dump-on-error) closed by Chris Johns
fixed
12:13 AM Ticket #3158 (Examples v2 does not build) closed by Chris Johns
fixed
12:09 AM Changeset in examples-v2 [c7dfbaf] by Chris Johns <chrisj@…>
Update rtems_waf to use the rootfs support. Fix trace linker INI files. Use the rtems_waf rootfs support to create a root file system. Remove the double cflags on some projects that broke linking. Remove the dump-on-error, there is no option in rtems-tld. Closes 3158. Closes 3159.
12:04 AM Changeset in examples-v2 [220ceb2] by Chris Johns <chrisj@…>
Add waf to the project so we control the version required. Updates 3158.

Oct 1, 2017:

11:58 PM Changeset in rtems_waf [de75eec] by Chris Johns <chrisj@…>
Add a rootfd module to make it easier for users.
11:57 PM Changeset in rtems_waf [0c2d2a3] by Chris Johns <chrisj@…>
Use the returned cflags. Add a Python 3 print helper.
12:23 AM Ticket #3160 (Trace linker score support is broken) created by Chris Johns
The trace linker needs to be updated to build. I am not sure which bit …
12:21 AM Ticket #3159 (Examples v2 trace linker ini files reference non-existing dump-on-error) created by Chris Johns
Remove the dump-on-error option.
12:20 AM Ticket #3158 (Examples v2 does not build) created by Chris Johns
Updating waf breaks the rootfs. Add rootfs support to rtems-waf.git.

Sep 30, 2017:

7:25 AM Ticket #3157 (PowerPC tools don't build on 32-bit hosts) closed by Sebastian Huber
duplicate: Duplicate of #2540.

Sep 29, 2017:

8:31 PM Ticket #3157 (PowerPC tools don't build on 32-bit hosts) created by Jeff Mayes
Using RSB and trying to build PowerPC. Updated RSB just a few days …
8:43 AM Changeset in rtems [f043b9b] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add I2C bus driver Update #3090.
5:43 AM Changeset in rtems [0b134aca] by Sebastian Huber <sebastian.huber@…>
bsp/bf537Stamp: Fix warning
5:06 AM Ticket #3156 (rtems-fdt probably not supported on 64-bit PowerPC) created by Sebastian Huber
The following warnings indicate that there are some problems on 64-bit …
5:05 AM Ticket #3155 (libdl not supported on 64-bit PowerPC) created by Sebastian Huber
There are several warnings: […] Due to vast ABI differences …

Sep 28, 2017:

11:18 AM Changeset in rtems [71923138] by Sebastian Huber <sebastian.huber@…>
shell: Fix missing prototype warning
11:18 AM Changeset in rtems [910adc3] by Sebastian Huber <sebastian.huber@…>
bsps: Fix integer to/from pointer warnings Update #3082.
11:17 AM Changeset in rtems [610ffd7] by Sebastian Huber <sebastian.huber@…>
bsp/gen5200: Fix warning Update #3122.
9:31 AM Changeset in rtems [9db9024] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Fix I2C register header Update #3090.
9:02 AM Ticket #3154 (Add recovery support for I2C bus) created by Sebastian Huber
FreeBSD has a recovery support for the I2C bus. Port this to RTEMS …
8:03 AM Changeset in rtems [ce28d601] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add imx_get_reg_of_node() Update #3090.
7:29 AM Changeset in rtems [7e195e66] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add imx_get_irq_of_node() Update #3090.
6:13 AM Changeset in rtems [4cfce5c] by Sebastian Huber <sebastian.huber@…>
i2c: Add temperature sensor LM75A driver Close #3163.
5:12 AM Changeset in rtems [f2b5d672] by Sebastian Huber <sebastian.huber@…>
bsps/powerpc: Fix print format warnings
5:05 AM Changeset in rtems [441993a8] by Sebastian Huber <sebastian.huber@…>
network: Add missing forward declaration

Sep 27, 2017:

1:14 PM Changeset in rtems [dbdb6a32] by Sebastian Huber <sebastian.huber@…>
posix: Remove superfluous includes
1:08 PM Changeset in rtems [de59c065] by Sebastian Huber <sebastian.huber@…>
posix: Implement self-contained POSIX mutex POSIX mutexes are now available in all configurations and no longer depend on --enable-posix. Update #2514. Update #3112.
12:55 PM Changeset in rtems-docs [87e1929] by Sebastian Huber <sebastian.huber@…>
Mention i.MX 7 SMP support Update #3090.
12:37 PM Changeset in rtems [e2fe881a] by Sebastian Huber <sebastian.huber@…>
score: Simplify red-black tree debug support Make the RBTree_Node layout independent of RTEMS_DEBUG (and all other build configuration options). This allows the use of this structure in Newlib. Update #3112.
10:07 AM Changeset in rtems [e460cd00] by Sebastian Huber <sebastian.huber@…>
score: Rename to _Scheduler_Control Rename struct Scheduler_Control to _Scheduler_Control to allow its use in standard header files, e.g. <pthread.h>. Update #3112.
7:55 AM Changeset in rtems-libbsd [91a7527]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Support more rgmii variants
7:54 AM Changeset in rtems-libbsd [ba0b059]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Add FECFLAG_AVB variant flag This flag is analogous to the Linux driver FEC_QUIRK_HAS_AVB. It indicates an FEC with support for Audio Video Bridging (AVB). This indicator is used for various other parts in the Linux driver (drivers/net/ethernet/freescale/fec_main.c). Use it to customize the receive/transmit buffer alignment. The receive buffer alignment increased to 64-bytes on the i.MX 6SoloX and i.MX 7Dual. There are no hard alignment restrictions for transmit buffers on these chips. Fix the ffec_softc::fectype type to provide enough storage for the feature flags.
7:42 AM Changeset in rtems-libbsd [e2e4bf4]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Avoid AXI bus issues due to a MAC reset
7:38 AM Changeset in rtems-libbsd [9c34735]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Use explicit cache synchronization
7:37 AM Changeset in rtems-libbsd [a70edfc]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Add wmb() to descriptor updates
7:33 AM Changeset in rtems-libbsd [7f7a339]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Support up to three interrupt requests
7:23 AM Changeset in rtems-libbsd [1378632]5-freebsd-12 by Sebastian Huber <sebastian.huber@…>
ffec: Increase descriptor ring alignment For optimal performance a 64-byte alignment is recommended.

Sep 26, 2017:

12:01 PM Changeset in rtems [362e96ab] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Provide a default console Update #3090.
5:52 AM Changeset in rtems [ef18d36] by Sebastian Huber <sebastian.huber@…>
posix: Remove superfluous includes
5:49 AM Changeset in rtems [5222488] by Sebastian Huber <sebastian.huber@…>
posix: Implement self-contained POSIX condvar POSIX condition variables are now available in all configurations and no longer depend on --enable-posix. Update #2514. Update #3113.
5:31 AM Changeset in rtems [4bf2ce31] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add register headers Update #3090.
5:10 AM Changeset in rtems [5616983] by Sebastian Huber <sebastian.huber@…>
bsp/imx: Add nocache section Update #3090.

Sep 24, 2017:

1:29 AM SOCIS/2017 edited by Mikail Yayla
(diff)
Note: See TracTimeline for information about the timeline view.