Timeline
02/04/14:
- 15:48 Changeset in rtems [5ff6a9ca]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps/sparc: Remove confusing nop
- 15:44 Changeset in rtems [f715433]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps/sparc: Order load/store by increasing offsets This may increase the cache hit performance.
- 15:33 Changeset in rtems [a54179d2]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps/sparc: Fix comments
- 07:38 Changeset in rtems-source-builder [56e8d80]4.104.114.95 by Chris Johns <chrisj@…>
- config: Add support to build qemu. Qemu requires gettext, glib, libffi, and pixman. DTC is built as a submodule. On Mavrick provide a pkg-config command so avoid needing a pkgconfig. The one here is only just good enough to work. Provide an internal autotools build including libtool so qemu can be built from git.
- 07:35 Changeset in rtems-source-builder [edf60aa]4.104.114.95 by Chris Johns <chrisj@…>
- sb: Do not assume the src is valid.
- 07:23 Changeset in rtems-source-builder [53b918e]4.104.114.95 by Chris Johns <chrisj@…>
- sb: Fix downloader url parsing and add submodule git support. Split the URL by line breaks into separate requests. With git reset the repo with each run. First perform a hard reset to remove any local patches and then switch back to master incase the repo was left on a branch or a detached head.
- 07:22 Changeset in rtems-source-builder [5601b9c]4.104.114.95 by Chris Johns <chrisj@…>
- sb: Add submodule support to the git support.
- 07:20 Changeset in rtems-source-builder [7c30130]4.104.114.95 by Chris Johns <chrisj@…>
- darwin: Default to cc and c++ for Mavrick.
- 07:19 Changeset in rtems-source-builder [00693f9]4.104.114.95 by Chris Johns <chrisj@…>
- config: Default _internal_autotools_path to nil when not an internal build.
- 07:18 Changeset in rtems-source-builder [d9c1a48]4.104.114.95 by Chris Johns <chrisj@…>
- rtems/gcc: Clean up the RSB version message.
02/03/14:
- 12:52 Changeset in rtems [fe535885]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/v850: Use proper ABI in linkcmds
- 12:43 Changeset in rtems [e1b96b8]4.115 by Sebastian Huber <sebastian.huber@…>
- libtests/block11: Use custom device driver
01/31/14:
- 18:28 Changeset in rtems [ba386a6]4.115 by Joel Sherrill <joel.sherrill@…>
- dosfs/fat.c: Remove use of register keyword
- 18:28 Changeset in rtems [cfbeaf6]4.115 by Joel Sherrill <joel.sherrill@…>
- calloc.c: Remove use of register keyword
- 17:03 Changeset in rtems [e633f3b]4.115 by Joel Sherrill <joel.sherrill@…>
- posix/*.c: Remove use of register keyword
- 16:55 Changeset in rtems [3a638ce]4.115 by Joel Sherrill <joel.sherrill@…>
- rtems/*.c: Remove use of register keyword
- 14:54 Changeset in rtems [185e46f]4.115 by Jennifer Averett <jennifer.averett@…>
- posix: Add POSIX thread affinity attribute support. With the addition of pthread affinity information in pthread_attr_t, the existing code for pthread_attr_t had to be adjusted.
- 14:13 Changeset in rtems [6dce1621]4.115 by Joel Sherrill <joel.sherrill@…>
- bootcard.c: Comment clean up
01/30/14:
- 15:39 Changeset in rtems-libbsd [45b110f]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- Fix legacy MCF548X FEC interface driver
- 15:39 Changeset in rtems-libbsd [e21bf0d]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- ftpd01: Use DHCP
- 15:20 Changeset in rtems-libbsd [f702955]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- ftpd01: Update due to API changes
- 15:01 Changeset in rtems [fd49e3f]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps/sparc: Fix linkcmds part of new network stack
- 14:59 Changeset in rtems-libbsd [821ae67]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- ZONE(9): Make sure the chunks are properly aligned
- 12:52 Changeset in rtems-libbsd [9449f15]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- mDNS: Import The sources can be obtained via: http://opensource.apple.com/tarballs/mDNSResponder/mDNSResponder-544.tar.gz
- 12:49 Changeset in rtems-libbsd [5638ae8]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- DHCPCD(8): Add automatically generated files
- 12:44 Changeset in rtems-libbsd [ec37843]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- DHCPCD(8): Add config.h
- 12:29 Changeset in rtems-libbsd [f2ed769]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- DHCPCD(8): Import Import DHCPCD(8) from: http://roy.marples.name/projects/dhcpcd/ The upstream sources can be obtained via: fossil clone http://roy.marples.name/projects/dhcpcd The imported version is 2014-01-29 19:46:44 [6b209507bb].
- 09:37 Changeset in rtems [bba0e09]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Fix barrier section definitions
- 03:04 Changeset in rtems-source-builder [04aadb6]4.104.114.95 by Chris Johns <chrisj@…>
- Check the user's PATH environment variable.
- 01:58 Changeset in rtems [fa4fe456]4.115 by Nick Withers <nick.withers@…>
- Move the flash size probe into bankValidate() Previously, bankValidate() could be called (e.g., BSP_flashWrite() -> regionCheckAndErase() -> argcheck() -> bankValidate()) without the probe having happened. When it then invoked BSP_flashCheckId(), unmapped memory could be read, possibly causing a fatal exception.
01/29/14:
- 08:29 Changeset in rtems [16a41cc]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add _Thread_Get_maximum_internal_threads()
- 08:06 Changeset in rtems [6c3517f]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/stm32f4: Use BSP_SMALL_MEMORY for a variant
- 07:53 Changeset in rtems [c26a945]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/lpc24xx: Fix compile error
01/28/14:
- 11:10 Changeset in rtems [022851a]4.115 by Sebastian Huber <sebastian.huber@…>
- Add thread-local storage (TLS) support Tested and implemented on ARM, m68k, PowerPC and SPARC. Other architectures need more work.
- 10:52 Changeset in rtems [960fd85]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Thread-local storage (TLS) for linkcmds
- 10:49 Changeset in rtems [a49bc35]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add _Heap_Size_with_overhead()
- 10:32 Changeset in rtems [a850d04]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add _Workspace_Allocate_aligned()
- 03:02 Changeset in rtems [e5d706c]4.115 by Chris Johns <chrisj@…>
- bsp/xilinx_zynq: Support configuraton of memory map. Remove SMP variants. Generate a linker command file from configure letting the user override the defaults to suite their custom needs. Refer to configure.ac for the details. Remove the SMP variants and let --enable-smp control if a BSP is built for SMP. Make USE_FAST_IDLE 1 only for the realview qemu BSP.
01/27/14:
- 19:55 Changeset in rtems [039a189d]4.115 by Jennifer Averett <jennifer.averett@…>
- sapi: Moved smp initialization and added cpuset initilization. SMP must be initialized in order to know the current set of cores available. Without this, you cannot initialize the default cpu_set_t associated with Classic API tasks and POSIX threads.
01/24/14:
- 15:37 Changeset in rtems-libbsd [4c3433b]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- Documentation
- 14:49 Changeset in rtems-libbsd [bc78466]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- Add Makefile.todo
- 12:27 Changeset in rtems-libbsd [8118e8e]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- Create "/etc" in rtems_bsd_initialize()
- 10:12 Changeset in rtems-libbsd [f7fe399]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- DHCPCD(8): Add namespace header
01/23/14:
- 23:56 Changeset in rtems [1465e70c]5 by Cody P Schafer <cody@…>
- fs/jffs2: use rbtree postorder iteration helper instead of opencoding Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead of opencoding an alternate postorder iteration that modifies the tree Signed-off-by: Cody P Schafer <cody@…> Cc: Michel Lespinasse <walken@…> Cc: Jan Kara <jack@…> Cc: David Woodhouse <dwmw2@…> Signed-off-by: Andrew Morton <akpm@…> Signed-off-by: Linus Torvalds <torvalds@…>
- 14:59 Changeset in rtems [e16a7ba]4.115 by Sebastian Huber <sebastian.huber@…>
- libchip/serial: Documentation
- 14:28 Changeset in rtems-libbsd [0543f16]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- mDNS: Use mutex for mDNSPosix platform
- 14:27 Changeset in rtems-libbsd [f7205c1]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- mDNS: mDNSShared/mDNSDebug.c Avoid reference to ProgramName?.
- 14:09 Changeset in rtems-libbsd [7222726]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- mDNS: mDNSShared/dnssd_clientshim.c Fix typos. Include missing header files.
- 13:59 Changeset in rtems-libbsd [406a2f4]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- mDNS: AnonInfoAnswersQuestion?: Fix stack usage The mDNSexport is normally defined to be empty, thus mDNSStorage is a huge stack variable (roughly 50KiB) with random data. Asuming a global mDNSStorage variable in the mDNSCore makes no sense.
- 09:56 Changeset in rtems [0656a00a]4.115 by Ralf Kirchner <ralf.kirchner@…>
- bsp/arm: Add CP15 methods
01/22/14:
- 13:26 Changeset in rtems-libbsd [31ab470]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- Add DEFAULT_NETWORK_SHELL
- 08:43 Changeset in rtems-libbsd [3951c97]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- mDNS: Add basic support
- 08:13 Changeset in rtems-libbsd [defe035]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- Add DEFAULT_NETWORK_NO_STATIC_IFCONFIG
- 03:36 TBR/BSP/STM32_F4 edited by Nickwithers
- /* Features */ Make a note that Ethernet is not supported, see http://www.rtems.org/pipermail/rtems-users/2014-January/012352.html (diff)
01/21/14:
- 15:14 Changeset in rtems-libbsd [f724741]4.1155-freebsd-126-freebsd-12freebsd-9.3 by Sebastian Huber <sebastian.huber@…>
- DHCPCD(8): Add getopt_long_r() support
- 03:09 Changeset in rtems-source-builder [2be445d]4.104.114.95 by Chris Johns <chrisj@…>
- 4.11/lm32: Fix the move to newlib 2.1.0.
- 01:03 Changeset in rtems-source-builder [53141b4]4.104.114.95 by Chris Johns <chrisj@…>
- 4.11: Move to the released newlib-2.1.0.
Note: See TracTimeline
for information about the timeline view.