Timeline
06/20/13:
- 21:21 Developer/OpenProjects edited by C Rempel
- /* Debugging */ (diff)
- 21:19 Developer/OpenProjects edited by C Rempel
- /* Testing */ (diff)
- 21:18 Developer/OpenProjects edited by C Rempel
- /* Tools and Development Environment */ (diff)
- 21:17 Developer/OpenProjects edited by C Rempel
- /* Testing */ (diff)
- 19:15 Projects/Open/SimulatorUpdates edited by C Rempel
- /* Project Deliverables (code, docs, testing) */ (diff)
- 19:13 Projects/Open/SimulatorUpdates edited by C Rempel
- (diff)
- 15:52 Changeset in rtems [6520aef1]4.115 by Joel Sherrill <joel.sherrill@…>
- sparc in_cksum: Use sparc which is available in -ansi mode
- 14:22 Changeset in rtems [0110491]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Add console devices only if present
- 14:20 Changeset in rtems [dbf62b3]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Fix warnings
- 12:33 Changeset in rtems [c4cfc62]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Use XPAR_INTC_SINGLE_BASEADDR This define is also present in newer "xparameters.h".
- 12:32 Changeset in rtems [dfb5805]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Remove unused configure macros
- 10:00 Changeset in rtems [37220fac]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Do not use printk() in shared console driver
- 09:57 Changeset in rtems [6307b1a]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Add fatal errors for shared console driver
- 09:44 Changeset in rtems [ade27c6]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Move bsp_generic_fatal_code to new file Add bsp_generic_fatal().
- 09:17 Changeset in rtems [5f91272]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps/powerpc: Delete bsp_exceptions_in_RAM Delete ppc_exc_vector_base. Add and use ppc_exc_initialize_with_vector_base().
- 09:03 Changeset in rtems [f97f46ce]4.115 by Sebastian Huber <sebastian.huber@…>
- libchip/serial: Fix warning
- 07:48 Changeset in rtems [cddb8f4]4.115 by Ric Claus <claus@…>
- bsps/arm: Fix some GIC functions
06/19/13:
- 10:57 Changeset in rtems [cb6b9ba]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/xilinx-zynq: Use magic UART baud divisor Use a baud divisor suitable for the evaluation board.
- 10:57 Changeset in rtems [3f6a823]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/xilinx-zynq: Do not start transmitter break
- 09:20 Changeset in rtems [9a037da9]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps/arm: Set vector base address if necessary
- 04:41 Changeset in rtems-source-builder [a06414c]4.104.114.95 by Chris Johns <chrisj@…>
- Use target flags that lets the AVR tools build.
- 04:37 Changeset in rtems-source-builder [9e0f6af]4.104.114.95 by Chris Johns <chrisj@…>
- Update the NIOS tools to support Cxc.
- 00:01 Projects/BenchmarkKit edited by C Rempel
- (diff)
06/18/13:
- 23:47 Projects/BenchmarkKit edited by C Rempel
- (diff)
- 15:47 Changeset in rtems [c9db7f9]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Use CONSOLE_DEVICE_NAME
- 15:45 Changeset in rtems [a4bc725e]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Remove debug output in shared console driver
- 15:20 Changeset in rtems [39c1534f]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Use generic interrupt support
- 14:44 Changeset in rtems [894e93f]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Fix header includes
- 14:42 Changeset in rtems [53dc697]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Delete BSP_ask_for_reset and BSP_panic
- 14:39 Changeset in rtems [bee7612e]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Move timer config to new file
- 14:27 Changeset in rtems [48ab8465]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Do not use PPC403 TTY driver
- 14:26 Changeset in rtems [ad094f4]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Fix warnings
- 14:25 Changeset in rtems [b45397fb]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Delete bsp_XAssertHandler()
- 14:24 Changeset in rtems [ff538bbf]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Delete unused variables
- 14:12 Changeset in rtems [0ba2736]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Replace low-level BSP start code Use linkcmds.base. Use EABI with small-data area.
- 13:19 Changeset in rtems [546c1056]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/virtex: Rename file dlentry.S in start.S Use default bsp_specs file.
- 12:57 Changeset in rtems [40883773]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add _Assert_Thread_dispatching_repressed()
- 12:14 Changeset in rtems [9165a5b0]4.115 by Sebastian Huber <sebastian.huber@…>
- IMFS: Fix reference count for debug enabled
- 11:37 Changeset in rtems [67f89f2]4.115 by Ralf Corsépius <ralf.corsepius@…>
- Update from automake-1.13.3.
- 07:18 Changeset in rtems [49bc9f81]4.115 by Sebastian Huber <sebastian.huber@…>
- bsp/xilinx-zynq: Use second UART for console This is in now line with the evaluation board.
06/17/13:
- 23:48 Projects/Leon_rtems_merge edited by C Rempel
- (diff)
- 17:10 Changeset in rtems-tools [56a70ae]4.104.115 by Dhananjay Balan <mb.dhananjay@…>
- Intial commit. Chris's intial work on the extenstions.
- 15:31 Changeset in rtems-tools [911e710]4.104.115 by Dhananjay Balan <mb.dhananjay@…>
- Initial commit
- 09:32 Developer/Simulators/QEMU/CANEmulation edited by Jinyang
- (diff)
- 09:01 Developer/Simulators/QEMU/CANEmulation edited by Jinyang
- (diff)
- 08:21 Changeset in rtems [010e4058]4.115 by Sebastian Huber <sebastian.huber@…>
- smptests/smpschedule01: Update due to API change
- 08:12 Changeset in rtems [c4a236a]4.115 by Sebastian Huber <sebastian.huber@…>
- Revert "sptests/sp02: Fix maximum task count" This reverts commit 6f8adb073b0c1b4d2a638f99710fda4e99938332. The resource count was correct.
- 07:57 Changeset in rtems [cf46db85]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Provide simple console selection
- 07:57 Changeset in rtems [9f868a16]4.115 by Sebastian Huber <sebastian.huber@…>
- bsps: Add missing include
- 00:09 Changeset in rtems-source-builder [80d5fde]4.104.114.95 by Chris Johns <chrisj@…>
- Remove /usr/local from build flags. They cause problems with BFD etc.
06/16/13:
- 13:40 Changeset in rtems [45fecbb6]4.115 by Jiri Gaisler <jiri@…>
- greth: do not advertise 1000M capability if MAC does not support it.
- 13:28 Changeset in rtems [1bdc6d1]4.115 by Jiri Gaisler <jiri@…>
- greth: prefer full duplex if available
06/15/13:
- 22:13 Changeset in rtems [1f4ee30]4.115 by Jiri Gaisler <jiri@…>
- Added in_cksum_sparc.h to optimize IP checksum calculations for SPARC.
06/14/13:
- 13:30 Changeset in rtems [961669d]4.115 by Sebastian Huber <sebastian.huber@…>
- documentation: Fix Doxygen comments
- 12:26 Changeset in rtems [edde99b]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Rename rtems_smp_get_number_of_processors() Rename in rtems_smp_get_processor_count(). Always provide <rtems/score/smp.h> and <rtems/rtems/smp.h>. Add _SMP_Get_processor_count(). This function will be a compile time constant defined to be one on uni-processor configurations. This allows iterations over all processors without overhead on uni-processor configurations.
- 12:00 Changeset in rtems [39e51758]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Add and use _CPU_SMP_Get_current_processor() Add and use _SMP_Get_current_processor() and rtems_smp_get_current_processor(). Delete bsp_smp_interrupt_cpu(). Change type of current processor index from int to uint32_t to match _SMP_Processor_count type.
- 11:04 Changeset in rtems [6f8adb0]4.115 by Sebastian Huber <sebastian.huber@…>
- sptests/sp02: Fix maximum task count
- 07:36 Ticket #2126 (building rtems) created by youssef
- i have executed this …
- 07:14 Changeset in rtems [d5ef7ae2]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Delete _SMP_Request_other_cores_to_dispatch() Use an event triggered unicast to inform remote processors about a necessary thread dispatch instead.
- 00:50 Projects/Leon_rtems_merge edited by C Rempel
- (diff)
- 00:46 Projects/Leon_rtems_merge edited by C Rempel
- /* References */ (diff)
- 00:36 Developer/OpenProjects edited by C Rempel
- /* Tools and Development Environment */ (diff)
- 00:30 Projects/Leon_rtems_merge edited by C Rempel
- (diff)
- 00:29 Developer/OpenProjects edited by C Rempel
- /* Tools and Development Environment */ (diff)
- 00:26 Developer/OpenProjects edited by C Rempel
- comment out CEXP, due to possible licensing issues (diff)
06/13/13:
- 21:38 WikiStart edited by JoelSherrill
- /* Tutorials */ Add ESA SOCIS (diff)
- 14:05 Changeset in rtems [f7740e97]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Rename _CPU_Processor_event_receive() Rename to _CPU_SMP_Processor_event_receive().
- 14:00 Changeset in rtems [07f6e419]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Rename _CPU_Processor_event_broadcast() Rename to _CPU_SMP_Processor_event_broadcast().
- 13:41 Changeset in rtems [ca63ae2]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Add and use _CPU_SMP_Send_interrupt() Delete bsp_smp_interrupt_cpu().
- 08:34 Changeset in rtems [a7ce0ce]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Delete RTEMS_BSP_SMP_CONTEXT_SWITCH_NECESSARY The thread dispatch is a side-effect of interrupt processing, thus there is no need to send an explicit message.
06/12/13:
- 15:06 Changeset in rtems [477259c]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Simplify _Thread_Create_idle()
- 13:11 Changeset in rtems [aabfcd0]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Fix _Thread_Dispatch_decrement_disable_level We must obtain the processor ID after interrupts are disabled since a non-optimizing compiler may store the value on the stack and read it back.
- 09:44 Ticket #2125 (building rtems) created by youssef
- when i arrived to make cd rtems export PATH=/opt/rtems-4.11/bin:$PATH …
- 09:39 Changeset in rtems [8f420927]4.115 by Sebastian Huber <sebastian.huber@…>
- scheduler: Simplify simple scheduler Add and use _Scheduler_simple_Insert_priority_fifo_order(), _Scheduler_simple_Insert_priority_lifo_order(), _Scheduler_simple_Insert_priority_fifo() and _Scheduler_simple_Insert_priority_lifo().
- 09:29 Changeset in rtems [ec978d9]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add _Chain_Insert_ordered_unprotected()
- 08:28 Developer/Simulators/QEMU/CANEmulation edited by C Rempel
- /* RTEMS environment */ (diff)
- 08:08 Changeset in rtems [5c78940d]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add and use _Thread_Dispatch_if_necessary() Delete _Thread_Evaluate_is_dispatch_needed(). Use _Thread_Dispatch_is_enabled() in rtems_task_mode() instead of the system state to determine if a thread dispatch is allowed. Signales are now delivered in rtems_task_mode() even if preemption is disabled. This is in line with rtems_signal_send().
- 07:25 Changeset in rtems [49cdf40]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add and use _Thread_Dispatch_is_enabled() Delete _Thread_Dispatch_in_critical_section() and _Thread_Is_dispatching_enabled().
- 07:16 Changeset in rtems [df244cfc]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Protect decrement operation
06/11/13:
- 15:09 Changeset in rtems [7a34ca37]4.115 by Sebastian Huber <sebastian.huber@…>
- rtems: Simplify rtems_task_mode()
- 08:00 Changeset in rtems [8b222be]4.115 by Sebastian Huber <sebastian.huber@…>
- smptests/smpschedule01: New test
- 07:29 Changeset in rtems [a8ef3bf0]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Add and use _Per_CPU_Lock_acquire() Add and use _Per_CPU_Lock_release().
- 07:26 Changeset in rtems [f70526a7]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Avoid cyclic include dependency
- 07:23 Changeset in rtems [1270440]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Add missing include
06/10/13:
- 19:13 GSoC/2013/ParavirtualizationOfRTEMS edited by Phipse
- /* Issues */ (diff)
- 19:13 GSoC/2013/ParavirtualizationOfRTEMS edited by Phipse
- Implementation section (diff)
- 14:15 Changeset in rtems [6eba7c85]4.115 by Sebastian Huber <sebastian.huber@…>
- scheduler: Specify thread of yield operation The yielding thread of the yield operation is now specified by a parameter. The tick operation may be performed for each executing thread in a SMP configuration.
- 12:36 Changeset in rtems [fed92f5f]4.115 by Sebastian Huber <sebastian.huber@…>
- termios: Notify driver about inactive transmit Returning this state in the return value leads to race conditions on SMP. The inactive state notification must be inside the critical section.
- 12:24 Changeset in rtems [7338299c]4.115 by Sebastian Huber <sebastian.huber@…>
- termios: Expand critical section Use interrupt disable/enable to protect the complete refill state change. This avoids race conditions for the task driven configuration and a later SMP support.
- 12:22 Changeset in rtems [65483f8]4.115 by Sebastian Huber <sebastian.huber@…>
- termios: SMP support
- 12:18 Changeset in rtems [58cde54]4.115 by Sebastian Huber <sebastian.huber@…>
- termios: Move wake up writer task action
- 12:11 Changeset in rtems [15f3a91]4.115 by Sebastian Huber <sebastian.huber@…>
- libchip: Use Termios API change for NS16550 This avoids a race condition on SMP configurations.
- 12:10 Changeset in rtems [2a8713a]4.115 by Sebastian Huber <sebastian.huber@…>
- termios: Avoid second return path
- 12:07 Changeset in rtems [6896ca2]4.115 by Sebastian Huber <sebastian.huber@…>
- libchip: Delete superfluous assignments
- 09:14 Changeset in rtems [c7bc6d4]4.115 by Sebastian Huber <sebastian.huber@…>
- rtems: Add interrupt locks Interrupt locks are low-level lock to protect critical sections accessed by threads and interrupt service routines.
- 09:12 Changeset in rtems [3ccce23]4.115 by Sebastian Huber <sebastian.huber@…>
- score: Always provide <rtems/score/smplock.h>
- 08:38 Developer/Simulators/QEMU/CANEmulation edited by Jinyang
- /* RTEMS environment */ (diff)
- 08:35 Developer/Simulators/QEMU/CANEmulation edited by Jinyang
- (diff)
- 08:10 Changeset in rtems [aec0e195]4.115 by Sebastian Huber <sebastian.huber@…>
- configure: Documentation
06/09/13:
- 02:13 Changeset in rtems [873859a4]4.115 by Cynthia Rempel <cynt6007@…>
- Make the default values easier for the configuration GUI to parse
06/07/13:
- 14:26 Changeset in rtems [1f3ce60]4.115 by Sebastian Huber <sebastian.huber@…>
- termios: Fix warning
- 09:50 Changeset in rtems [18e2fbe7]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Fix PowerPC context switch
06/06/13:
- 13:42 Changeset in rtems [7cf2ec6f]4.115 by Sebastian Huber <sebastian.huber@…>
- smp: Set state PER_CPU_STATE_UP on main processor
- 13:41 Changeset in rtems [a936aa49]4.115 by Sebastian Huber <sebastian.huber@…>
- scheduler: New simple SMP scheduler implementation The new Simple SMP Scheduler allocates a processor for the processor count highest priority ready threads. The thread priority and position in the ready chain are the only information to determine the scheduling decision. Threads with an allocated processor are in the scheduled chain. After initialization the scheduled chain has exactly processor count nodes. Each processor has exactly one allocated thread after initialization. All enqueue and extract operations may exchange threads with the scheduled chain. One thread will be added and another will be removed. The scheduled and ready chain is ordered according to the thread priority order. The chain insert operations are O(count of ready threads), thus this scheduler is unsuitable for most real-time applications. The thread preempt mode will be ignored.
- 13:32 Changeset in rtems [a344308]4.115 by Sebastian Huber <sebastian.huber@…>
- scheduler: Add and use _Scheduler_default_Tick() Delete _Scheduler_priority_Tick(). Use _SMP_Get_processor_count() for default tick operation. Delete _Scheduler_simple_smp_Tick().
- 13:28 Changeset in rtems [1ccb64e1]4.115 by Sebastian Huber <sebastian.huber@…>
- scheduler: Add start idle thread operation Add and use _Scheduler_Start_idle().
- 10:07 Changeset in rtems [9bfd7ff]4.115 by Sebastian Huber <sebastian.huber@…>
- dosfs: Documentation
- 05:13 Changeset in rtems-source-builder [8113b76]4.104.114.95 by Chris Johns <chrisj@…>
- m32c: As per GCC PR 50928 use -O0 to build libgcc.
Note: See TracTimeline
for information about the timeline view.