Timeline




matching tags

Dec 16, 1999:

2:30 PM Changeset in rtems [947c27a]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Spelling error corrected.

Dec 14, 1999:

1:30 PM Changeset in rtems [f09ac268]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
More warnings removed after email with Emmanuel Raguet.
1:23 PM Changeset in network-demos [7054195]4.11netdemos-4-5-branchnetwork-demos-4-10-branchnetwork-demos-4-6-branchnetwork-demos-4-7-branchnetwork-demos-4-8-branchnetwork-demos-4-9-branchrtems-4-5-branch by Joel Sherrill <joel.sherrill@…>
Changed CONFIGURATION_MICROSECONDS_PER_TICK definition to a more reasonable value.

Dec 13, 1999:

10:12 PM Changeset in rtems [e8918ec]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Eric Norum <eric@…> to change to gen68360 clock handling. I got tired of having strange clock rates (e.g. #define CONFIGURE_MICROSECONDS_PER_TICK 52489) and drifting times-of-day with the gen68360 BSP so I changed the way the programmable-interval clock interrupt works. The new version will have some jitter in the intervals between individual calls to the rtems_clock_tick routine, but the long-term average will match the CONFIGURE_MICROSECONDS_PER_TICK
10:10 PM Changeset in rtems [c629812]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Removed warnings.
9:21 PM Changeset in rtems [da8ae79b]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Warning removal patch from Philip A. Prindeville <philipp@…>.
8:35 PM Changeset in rtems [1c98d28]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-19991203.sh2.diff from John M. Mills <jmills@…> which fixes some problems: I found the problem which prevented opening 'dev/sci1' (the default console) with the 'gensh2' (sh7045) BSP. Both SCI ports were being initialized against the same minor device number: '0'. When I tried to open minor-device '1', it naturally crashed. Fixing that one value in the 'sci_device[]' array solved the problem and allowed 'hello.exe' to run.
8:30 PM Changeset in rtems [1d5039f]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
* empty log message *
8:06 PM Changeset in rtems [f9669ce5]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Silverio Diquigiovanni <silverio.di@…> to correct TPC values. Reviewed by Ralf Corsepius <corsepiu@…> who originally submitted the file.
7:20 PM Changeset in rtems [fc0b91c]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Eric Norum <eric@…> to make the NTP handler a little more flexible about the error status returned from a timeout.
5:37 PM Changeset in rtems [5dae90a]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-rc-19991203-3.diff from Ralf Corsepius <corsepiu@…> which adds automake support to libbsp/bare.
5:22 PM Changeset in rtems [6b79a071]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Jepsen Hans Peter <hans_peter_jepsen@…> to use correct ifdef conditional (GNUC not GCC).
5:03 PM Changeset in rtems [809f4451]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Correction from Eric Norum for timeout in TFTP driver following bug report by Nick.SIMON@…: TFTP uses UDP and UDP packets are prime targets for getting dropped when the network gets busy. I want the number of retries quite large in my application. I see that PACKET_REPLY_MILLISECONDS is, in fact, not being used.
4:29 PM Changeset in rtems [9537e5e]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Eric Norum <eric@…> to provide more network functionality. This puts RTEMS in near compliance with the network functionality defined in the first draft of the EL/IX API. Comments follow: With the attached changes to the libnetworking/libc/Makefile.in, RTEMS provides all the functions listed in section 4.14 of the EL/IX document except: socketpair if_nametoindex if_indextoname if_nameindex if_freenameindex Some of the routines which get information from files may be of limited use unless an application sets up the files somehow (TFTP/untar from host, etc.), but at least RTEMS is pretty much fully buzzword compliant with the networking section of the EL/IX API.
4:25 PM Changeset in rtems [38b81b5]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Emmanuel Raguet <raguet@…> to correct some problems in the dec21140 driver. Comments follow: I have tried to use bootp with the dec21140 driver and I had problems. I have found them - Ethernet address must be known in Attach step (read from the board) - Endian problem for Ethernet address storage. Now it is solved and I can use bootp to obtain the network configuration of the target.
4:16 PM Changeset in rtems [4bdebdfe]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-rc-19991203-4.diff from Ralf Corsepius <corsepiu@…>""" which is an adaptation of a patch from Ian Lance Taylor plus a few other changes that should significantly speed up building librtemsall.a.
4:02 PM Changeset in rtems [ad0c286]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-rc-19991203-3.diff from Ralf Corsepius <corsepiu@…> which adds automake support to libbsp/bare.
3:57 PM Changeset in rtems [fa178d4]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-rc-19991203-3.diff from Ralf Corsepius <corsepiu@…> which adds automake support to libbsp/bare.
3:54 PM Changeset in rtems [d16faa2]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-rc-19991203-2.diff from Ralf Corsepius <corsepiu@…> to correct the missing part of the mcp750 patch.
3:29 PM Changeset in rtems [7d91d72]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
First attempt at adding simple binary semaphore in addition to the current "mutex" and counting semaphore. This is at the request of Eric Norum and his EPICS porting effort.
2:50 PM Changeset in rtems [e9067989]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Corrected order of output.
2:49 PM Changeset in rtems [d9230ea]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added RTEMS_IO_ERROR.
2:48 PM Changeset in rtems [49be66d]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Now builds and installs properly.
2:48 PM Changeset in rtems [000a9a9]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch rtems-rc-19991203-1.diff from Ralf Corsepius <corsepiu@…> to generalize librdbg for all i386 BSPs. His comments: The patch below generalizes librdbg for all i386 bsps. It is not a complete rewrite, but a minimal invasive attempt to generalization. To apply: mv c/src/librdbg/src/i386/pc386 c/src/librdbg/src/i386/any patch -p1 < patches-rc-19991203-1.diff ./bootstrap

Dec 6, 1999:

1:44 PM Changeset in rtems [39e6bbe1]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch patches-rc-19991203-1.diff from Ralf Corsepius <corsepiu@…> which makes i386 code available for all BSPs not just pc386. This is correct since the code is really general to all i386 BSPs now.
Note: See TracTimeline for information about the timeline view.