Timeline




matching tags

Jul 11, 1998:

2:23 PM Changeset in rtems [5b8c1b7]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Yet another EXEEXT patch. This one is from Ralf Corsepius <corsepiu@…> and his comments are below: Joel, obviously you did apply my previous patch to gcc-target-default.cfg -- This should have been gcc.cfg (gcc-target-default.cfg should NOT contain any EXEEXT).

Jul 10, 1998:

7:05 PM Changeset in rtems [3a447c3]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
changed version to 980710
3:43 PM Changeset in rtems [dbfa3148]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Quality Quorum <qqi@…>. Comments: c/src/lib/libbsp/i386/pc386/console/console.c assert() modified so it prints on selected console instead of PC console c/src/lib/libbsp/i386/pc386/console/inch.c inch_sleep() modified, so it does not depend upon tmacros.h c/src/lib/libbsp/i386/pc386/pc386dev/GDB.HOWTO description updated c/src/lib/libbsp/i386/pc386/startup/exit.c last output before call to exit() will be printed properly on serial console c/src/lib/libbsp/i386/pc386/startup/irq.c re-submitted bug fix for problem in irqs over 7.
2:13 PM Changeset in rtems [cc8a388a]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from Ralf Corsepius <corsepiu@…>. Comments: > It seems that rules for %{EXEEXT} don't exist in gcc-target-default.cfg No, gcc-target-default.cfg is used to compile executables for the target only, not for the host. EXEEXT may only be used for programs to be run on the host. > What should I add please? This was a bug in my initial configuration patch to rtems-980616. A correction to this patch I had sent to Joel at 26.06.98 doesn't seem to have made it into the snapshot. Please find attached the patch I had sent to Joel, hopefully this patch fixes this problem.
1:22 PM Changeset in rtems [32067a30]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Regenerated after patch from David Fiddes <D.J.Fiddes@…> for one of the aclocal macros.
1:22 PM Changeset in rtems [8555ddb]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Patch from David Fiddes <D.J.Fiddes@…>. Comments below: With a bit of help from Ralf I was able to trace the problem with sed. It was a typo, sed should have had it's params surrounded by 's rather than "s which bash picked up and discarded. The patch is enclosed. Ralf and I aren't sure why configure didn't just stop at this point... The rest of configure/build went OK because there are two sections where the -for-/ hack is implemented and the other one is more important and worked just fine.

Jul 9, 1998:

11:32 PM Changeset in rtems [fb32356b]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added set attributes routine but did not hook it in to the table. Switched to shared default probe.
11:31 PM Changeset in rtems [abd8c82]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added new files.
11:31 PM Changeset in rtems [31cad72c]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Renamed so we could have one file per routine.
11:30 PM Changeset in rtems [064b9be]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Switched to shared default probe routine.
11:30 PM Changeset in rtems [693b5b88]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Switched to default probe routine.
11:29 PM Changeset in rtems [61ff7ac8]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added new baud rate to number function and default serial probe routine. Renamed sersupp.c so we could have one routine per file to decrease the baggage pulled into an application by default.
10:59 PM Changeset in rtems [11c6a92d]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Commented out the system call invocation since we don't know what works with this ROM monitor.
10:59 PM Changeset in rtems [a6e36dff]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Removed call back to exit() since that has already been called.
10:21 PM Changeset in rtems [e78c474b]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added proper handling of extended baud rate table selection at boot time. Still need to address default terminal settings.
10:16 PM Changeset in rtems [2c5ea01]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Properly handle extended baud rate set commands. Temporarily "if 0" of code which enables interrupts. Moved setting of command registers at open but the current implementation is questionable. Added reset of RX errors while polling TX. Read polled character as unsigned. Baud rate mask must be in upper and lower nibble.
10:11 PM Changeset in rtems [e3c59dd]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Corrected definition of MC68681_RX_BUFFER.
6:52 PM Changeset in rtems [d7d51376]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Now strip elf executables so they are much smaller and quicker to read from and write to a floppy.
6:50 PM Changeset in rtems [2ba0a0c2]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Corrected z85c30 address and clock constants.
6:49 PM Changeset in rtems [459c1d2]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added board specific baud rate table and set driver function table to polled.
6:45 PM Changeset in rtems [2d8e51aa]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Changed static to MC68681_STATIC to make all data and routines globally visiable to ease debugging. Added support for mc68681 "2 column" style baud rate table as well as the Exar 88681 "4 column" style baud rate table. Added support for user override of the default baud rate table.
6:44 PM Changeset in rtems [b2ec38c8]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Removed commented out line.
6:41 PM Changeset in rtems [8f6f641e]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added sersupp.c.
6:41 PM Changeset in rtems [d94d47b3]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
New files to contain generally needed serial driver support routines.
6:40 PM Changeset in rtems [37e8259]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Changed static to MC68681_STATIC to make all routines and data global to ease debugging.
6:39 PM Changeset in rtems [8b2492f]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added support for the Extended Baud Rate set control found in the Exar 88681 but not in the base 68681. Added support for user provided baud rate tables. This is needed when the board does not use the standard baud rate clock.
6:38 PM Changeset in rtems [27045a82]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Changed static to NS16550_STATIC to make all routines and data global to ease debugging.
6:37 PM Changeset in rtems [677a503]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Changed static to Z85C30_STATIC so all data and routines could be global for debugging purposes.
6:36 PM Changeset in rtems [80b1c2f]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added information to README.mc68681. Created the basic README and the README.z85c30.

Jul 7, 1998:

7:05 PM Changeset in rtems [0d1184f]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
changed version to 980707
7:00 PM Changeset in rtems [d859b5f]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
changed version to 9800707
6:35 PM Changeset in rtems [57c9bc2]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Removed rtems-glom as a generated file. Regenerated aclocal.m4 and configure.
4:38 PM Changeset in rtems [030ff417]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Conditionals for CONSOLE_USE_INTERRUPTS should have been "if" not "if defined".

Jul 6, 1998:

7:00 PM Changeset in rtems [270d58f]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
New file to satisfy readdir() family.
6:44 PM Changeset in rtems [a90b990]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Missed this file in the initial merge.
2:52 PM Changeset in rtems [b5bb3d6]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Update from Geoffroy Montel (g_montel@…) to get in sync with termios and eliminate warnings.
2:51 PM Changeset in rtems [1d22b03]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added Geoffroy Montel (g_montel@…) for the gen68340 BSP.

Jul 5, 1998:

11:04 AM Changeset in rtems [5ae415b]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added include of termios.h. Also added a block of comments above the console_tbl structure to explain each entry.
11:01 AM Changeset in rtems [bc2ebb4]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added some address constants for the SCC and DUART to make it easier to fill in the configuration table.
11:00 AM Changeset in rtems [e7ff2b2]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
New file added in the process of converting the console driver to libchip/serial.
11:00 AM Changeset in rtems [92a6454]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Converted the console driver to use libchip/serial and added support for the z85c30 found on the DMV177. This effort started with the console driver from the Radstone PPC2. But some simplifications were made in the hope that console.c can be made a shared file at some point in the near future. Split the debugio from console. This was done so at some point in the future printk support as is found in the pc386 BSP can be shared across all BSPs.

Jul 2, 1998:

6:07 PM Changeset in rtems [0e8c2000]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Renamed old_start340.s to startfor340only.s

Jul 1, 1998:

10:03 PM Changeset in rtems [132f194]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Initial submission of gen68340 BSP (should run on a 68349) from Geoffroy Montel <g_montel@…>.
9:33 PM Changeset in rtems [a05de51]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Added _stat_r and changed spacing.
9:33 PM Changeset in rtems [dd6dddc]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Fixed typo.

Jun 29, 1998:

5:52 PM Changeset in rtems [4f0fc115]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Correction from Aleksey Romanov <qqi@…> to finish off his patch. I had trouble merging his original patch and this corrected a reject.
5:51 PM Changeset in rtems [dc95ee8d]4.104.114.84.95 by Joel Sherrill <joel.sherrill@…>
Changed prototype for console_write_support to eliminate a warning.
Note: See TracTimeline for information about the timeline view.