Timeline




matching tags

Jul 9, 1998:

11:32 PM Changeset in rtems [fb32356b]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added set attributes routine but did not hook it in to the table. Switched to shared default probe.
11:31 PM Changeset in rtems [abd8c82]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added new files.
11:31 PM Changeset in rtems [31cad72c]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Renamed so we could have one file per routine.
11:30 PM Changeset in rtems [064b9be]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Switched to shared default probe routine.
11:30 PM Changeset in rtems [693b5b88]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Switched to default probe routine.
11:29 PM Changeset in rtems [61ff7ac8]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added new baud rate to number function and default serial probe routine. Renamed sersupp.c so we could have one routine per file to decrease the baggage pulled into an application by default.
10:59 PM Changeset in rtems [11c6a92d]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Commented out the system call invocation since we don't know what works with this ROM monitor.
10:59 PM Changeset in rtems [a6e36dff]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Removed call back to exit() since that has already been called.
10:21 PM Changeset in rtems [e78c474]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added proper handling of extended baud rate table selection at boot time. Still need to address default terminal settings.
10:16 PM Changeset in rtems [2c5ea01]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Properly handle extended baud rate set commands. Temporarily "if 0" of code which enables interrupts. Moved setting of command registers at open but the current implementation is questionable. Added reset of RX errors while polling TX. Read polled character as unsigned. Baud rate mask must be in upper and lower nibble.
10:11 PM Changeset in rtems [e3c59dd]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Corrected definition of MC68681_RX_BUFFER.
6:52 PM Changeset in rtems [d7d51376]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Now strip elf executables so they are much smaller and quicker to read from and write to a floppy.
6:50 PM Changeset in rtems [2ba0a0c2]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Corrected z85c30 address and clock constants.
6:49 PM Changeset in rtems [459c1d2]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added board specific baud rate table and set driver function table to polled.
6:45 PM Changeset in rtems [2d8e51aa]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Changed static to MC68681_STATIC to make all data and routines globally visiable to ease debugging. Added support for mc68681 "2 column" style baud rate table as well as the Exar 88681 "4 column" style baud rate table. Added support for user override of the default baud rate table.
6:44 PM Changeset in rtems [b2ec38c8]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Removed commented out line.
6:41 PM Changeset in rtems [8f6f641e]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added sersupp.c.
6:41 PM Changeset in rtems [d94d47b3]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
New files to contain generally needed serial driver support routines.
6:40 PM Changeset in rtems [37e8259]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Changed static to MC68681_STATIC to make all routines and data global to ease debugging.
6:39 PM Changeset in rtems [8b2492f]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added support for the Extended Baud Rate set control found in the Exar 88681 but not in the base 68681. Added support for user provided baud rate tables. This is needed when the board does not use the standard baud rate clock.
6:38 PM Changeset in rtems [27045a82]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Changed static to NS16550_STATIC to make all routines and data global to ease debugging.
6:37 PM Changeset in rtems [677a503]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Changed static to Z85C30_STATIC so all data and routines could be global for debugging purposes.
6:36 PM Changeset in rtems [80b1c2f]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added information to README.mc68681. Created the basic README and the README.z85c30.

Jul 7, 1998:

7:05 PM Changeset in rtems [0d1184f]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
changed version to 980707
7:00 PM Changeset in rtems [d859b5f]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
changed version to 9800707
6:35 PM Changeset in rtems [57c9bc2]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Removed rtems-glom as a generated file. Regenerated aclocal.m4 and configure.
4:38 PM Changeset in rtems [030ff417]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Conditionals for CONSOLE_USE_INTERRUPTS should have been "if" not "if defined".

Jul 6, 1998:

7:00 PM Changeset in rtems [270d58f]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
New file to satisfy readdir() family.
6:44 PM Changeset in rtems [a90b990]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Missed this file in the initial merge.
2:52 PM Changeset in rtems [b5bb3d6]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Update from Geoffroy Montel (g_montel@…) to get in sync with termios and eliminate warnings.
2:51 PM Changeset in rtems [1d22b03]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added Geoffroy Montel (g_montel@…) for the gen68340 BSP.

Jul 5, 1998:

11:04 AM Changeset in rtems [5ae415b]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added include of termios.h. Also added a block of comments above the console_tbl structure to explain each entry.
11:01 AM Changeset in rtems [bc2ebb4]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added some address constants for the SCC and DUART to make it easier to fill in the configuration table.
11:00 AM Changeset in rtems [e7ff2b2]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
New file added in the process of converting the console driver to libchip/serial.
11:00 AM Changeset in rtems [92a6454]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Converted the console driver to use libchip/serial and added support for the z85c30 found on the DMV177. This effort started with the console driver from the Radstone PPC2. But some simplifications were made in the hope that console.c can be made a shared file at some point in the near future. Split the debugio from console. This was done so at some point in the future printk support as is found in the pc386 BSP can be shared across all BSPs.

Jul 2, 1998:

6:07 PM Changeset in rtems [0e8c2000]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Renamed old_start340.s to startfor340only.s

Jul 1, 1998:

10:03 PM Changeset in rtems [132f194]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Initial submission of gen68340 BSP (should run on a 68349) from Geoffroy Montel <g_montel@…>.
9:33 PM Changeset in rtems [a05de51]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added _stat_r and changed spacing.
9:33 PM Changeset in rtems [dd6dddc]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Fixed typo.

Jun 29, 1998:

5:52 PM Changeset in rtems [4f0fc115]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Correction from Aleksey Romanov <qqi@…> to finish off his patch. I had trouble merging his original patch and this corrected a reject.
5:51 PM Changeset in rtems [dc95ee8d]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Changed prototype for console_write_support to eliminate a warning.

Jun 27, 1998:

8:01 PM Changeset in rtems [cf65c408]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Bare BSP patch from Chris Johns <cjohns@…>. He also sent an example bare bsp but we have not decided how to integrate it yet.
6:51 PM Changeset in rtems [5d18fb0]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
PC386 BSP enhancements from Aleksey Romanov (Quality Quorum <qqi@…>). Unfortunately after merging these, the pc386 will not boot using grub for for. It still does not work using netboot for me. Here is his summary of changes: rtems/c/src/lib/libbsp/i386/pc386/Makefile.in Added support for new sub-directory rtems/c/src/lib/libbsp/i386/pc386/bsp_specs Made possible to build COFF image rtems/c/src/lib/libbsp/i386/pc386/console/console.c Added support for serial consoles, selectable by patching binary image, added assert(), use _IBMPC_inch_sleep() instaed of _IMBPC_inch() rtems/c/src/lib/libbsp/i386/pc386/console/inch.c Added _IMBPC_inch_sleep() rtems/c/src/lib/libbsp/i386/pc386/console/outch.c Oops - just formatting rtems/c/src/lib/libbsp/i386/pc386/include/Makefile.in Added support for new files rtems/c/src/lib/libbsp/i386/pc386/include/bsp.h Added support for new features rtems/c/src/lib/libbsp/i386/pc386/include/pc386uart.h New file: definitions for serial ports rtems/c/src/lib/libbsp/i386/pc386/include/pcibios.h New file: definitions for PCI BIOS rtems/c/src/lib/libbsp/i386/pc386/pc386dev/Makefile.in New file: makefile in new directory rtems/c/src/lib/libbsp/i386/pc386/pc386dev/i386-stub-glue.c New file: i386-stub interface rtems/c/src/lib/libbsp/i386/pc386/pc386dev/i386-stub.c New file: i386-stub itself rtems/c/src/lib/libbsp/i386/pc386/pc386dev/pc386uart.c New file: serial ports rtems/c/src/lib/libbsp/i386/pc386/pc386dev/pcibios.c New file: PCI BIOS support rtems/c/src/lib/libbsp/i386/pc386/start/start.s Commented out DEBUG_EARLY stuff, everything is working fine rtems/c/src/lib/libbsp/i386/pc386/start/start16.s Cleaned up rtems/c/src/lib/libbsp/i386/pc386/startup/bspstart.c Added call to console_resereve_resources rtems/c/src/lib/libbsp/i386/pc386/startup/exit.c Added support for serial console rtems/c/src/lib/libbsp/i386/pc386/startup/ldsegs.s Fixed typo in comments rtems/c/src/lib/libbsp/i386/pc386/tools/Makefile.in Changed to reflect cnages in code rtems/c/src/lib/libbsp/i386/pc386/tools/bin2boot.c Trivialized, problem - I do not know how to make patch remove obsolete files - there are a lot of them there rtems/c/src/lib/libbsp/i386/pc386/tools/binpatch.c New file: utility to do binary patches rtems/c/src/lib/libbsp/i386/pc386/wrapup/Makefile.in Added support for new directory rtems/make/custom/pc386.cfg Add COFF image building
5:09 PM Changeset in rtems [98100d2]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Monstrous patch from Ralf Corsepius <corsepiu@…>. I have made no attempt to divide the comments up and place them with just the appropriate files. Here is an excerpt from Ralf's email: Changes including comments on changes I made after cycling through all the targets: * Added ranlib support. Now all targets use "ranlib" instead of "ar -s" to build an index for a library. If ranlib isn't detected during configuration, check if ar -s is working and try "ar -s" instead of * Removed $(XXX_FOR_TARGET) from make/target.cfg.in, use $(XXX) instead now. * gcc-target-default.cfg: LINK_XXXX-defines reworked to solve the -l problem under posix (cf gcc-target-default.cfg) * rtems-glom replaced by Makefile-rules inside of the wrapup/Makefile.in that has been using rtems-glom until now. * Removed CCC and friends in gcc-target-default.cfg, as they have been breaking CXX support. * Removed CONFIG.$(TARGET_ARCH).CC lines from several custom/*.cfg files, because this is now set in custom/default.cfg. * Added aclocal/ar-s.m4, check whether "ar -s" is working * Added aclocal/cygwin.m4 and aclocal/exeext.m4. * Reworked aclocal/canonicalize-tools.m4: Added ar -s check; fixes for problems when XXX_FOR_TARGET is given via environment variables (didn't work for gcc until now), adding cygwin check, improved autoconf-cache handling. * Removed -l from make rule dependencies. LINK_LIBS is now allowed to contain -L and -l. LINK_OBJS and LINK_FILES must not contain -L or -l. gcc28 make-exe rules now link using $(LINK_OBJS) $(LINK_LIBS) => Almost all custom/*.cfg are modified. This is very likely to break something because of typos or having missed to edit a file. Open problems, known bugs, things I didn't do: * custom/p4000.cfg seems to be out of date and requires to be reviewed. (JRS NOTE: It is subordinate p4650 and p4600 -- both of which build ok after minor changes.) * custom/psim.cfg needs to be reviewed, I added some changes to it, I am insecure about. (JRS NOTE: psim had a minor problem endif/endef swapped but runs fine.) * rtems-glom.in can now be removed. * gcc*.cfg files "make depend" rules don't honor language specific flags (e.g CXXFLAGS is ignored for *.cc) - Nothing to worry about now, but may cause problems for hosts/targets not using gcc or rtems-add-ons that use external packages. * AFAIS, the no_bsp BSP can't be build anymore, i.e. configure refused to configure for it whatever I tried. * The toplevel and toplevel+1 README files are quite out-dated * cygwin.m4 isn't of much use for rtems. In most cases (cf. aclocal/*.m4) it is worked around by directly using $host_os. I think I'll remove it soon after the next snapshot * Before release the cygwin patch needs to be tested under cygwin. I may have broken/missed something (esp. the sed-pattern to convert into / may be broken). * You should try to build/run the posix-BSP under solaris - I don't expect problems, but I am not 100% sure, esp. with regard to ranlib/ar -s. * You should consider to convert all make/compilers/*.cfg files into make/compilers/*.cfg.in files and let autoconf generate the *.cfg. This may help getting rid of some if/then/else statements and help hard-coding some defines into those files in future and shouldn't disturb now. * Not having installed libc.a/libm.a on a host may still break building rtems, esp. when using -disable-gcc28 as the gcc27-configuration scheme directly accesses libc.a and libm.a. The problem should not appear when using gcc28 because it references libc/libm only through -lc and -lm which may be static or dynamic (I didn't test this). * shgen is not yet included (I didn't yet have enough time to integrate it). * I know about a few more configure-probs (esp. cross-checking --enable-* flags). + warn/refuse to configure when --enable-libcdir and --enable-gcc28 are given. + force --enable-libcdir when --disable-gcc28 is given * Replaced KSHELL with @KSH@ in some shell scripts generated by configure.in. * Added a dependency to aclocal/*.m4 in the toplevel Makefile => configure and aclocal.m4 will now be rebuild when any aclocal/*.m4 file is changed * Some changes to aclocal/gcc-pipe.m4 and aclocal/gcc-specs.m4 * Replaced i3456?86-unknown-freebsd2.12? with i3456?86-*freebsd2.* in configure.in, as I suppose there might exist a variety of valid vendors (2nd field of the name-tripple) * Disabled override MAKEFLAGS in toplevel Makefile.in - Potential side-effects are not really clear to me. * In mvme162.cfg, $(LINK_LIBS) is missing in the CC line in gcc28's make-exe rule (yet another one I missed to edit). Just append $(LINK_LIBS) to the "CC" line, like I hopefully did to ALL other custom/*.cfg files. * the problem with mvme162lx.cfg is a follow-up problem of the mvme162.cfg-bug. * mvme162/console and idp/console had variables named Buffer which conflicted with similarly named variables in some tests.

Jun 25, 1998:

6:42 PM Changeset in rtems [d13b247]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Clean up from Aleksey Romanov (Quality Quorum <qqi@…>). Here are his comments: I removed all unnecessary stuff from start16.s - setting idt and setting 16-bit stack using .code32 istructions.
4:54 PM Changeset in rtems [7252f656]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added David Fiddes for ColdFire?.
4:26 PM Changeset in rtems [b22b1294]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Coldfire support patch from David Fiddes <D.J.Fiddes@…>.
4:21 PM Changeset in rtems [a5400c0]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Bare bsp patch from Chris Johns and regenerated files.
4:21 PM Changeset in rtems [43b78f1]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Added definition of RTEMSmcpu32p per patch from Robin Kirkham.
4:10 PM Changeset in rtems [924e17a]4.104.114.84.9 by Joel Sherrill <joel.sherrill@…>
Patch from Robin Kirkham <Robin.Kirkham@…> to distinguish between CPU32 and CPU32+ cores. Commentary follows: Unfortunately c/src/exec/score/cpu/m68k/m68k.h incorrectly defines M68K_HAS_MISALIGNED for the plain old CPU32 (it is correct for the CPU32+). As a consequence, the recently-relocated m68k memcpy() may still attempt misaligned memory accesses. I suggest that until such time as egcs/gcc differentiates these cores that we invent a new preprocessor symbol, RTEMSmcpu32p for this purpose, on the assumption that egcs may one day grow a -mcpu32+ option which will define a mcpu32p symbol (whether this option would also define mcpu32 is yet to be resolved). BSPs that have a CPU32+ (like gen68360) would for the time being define RTEMSmcpu32p using -D. The symbol is `RTEMSmcpu32p' because symbols of the form xxx should only be defined by the compiler itself. Note that the patch tests for RTEMSmcpu32p *before* mcpu32, since mcpu32 is still defined for the CPU32+. It does not change the gen68360 BSP. An aside: Note that in egcs-1.0.3a, the option -m68332 is identical to -mcpu32, except it defines mc68332 as well as mcpu32. This is only for the sake of compatibility. The story with -m68302 is similar; it defines mc68302 and mc68000. In my opinion these options are depreciated and ought to be avoided in RTEMS.
Note: See TracTimeline for information about the timeline view.