Notice: We have migrated to GitLab launching 2024-05-01 see here:

#3878 closed defect (worksforme)

rtems06: All BSPs Fail to build with BSP Builder on rtems 6

Reported by: Joel Sherrill Owned by:
Priority: normal Milestone: 6.1
Component: rtems Version: 6
Severity: normal Keywords:
Cc: Blocked By:


I think there are a couple of places in an rtems6 build of RTEMS itself where rtems5 is being used from some hard-coded. Not sure what's up but here's the message to the build@ list.

From the post above, you only see that all failed. Looking at the build log from a single BSP, I see is early which doesn't cause a visible failure

gmake[4]: Entering directory `/home/joel/rtems-cron-6/b-jmr3904/mips-rtems6/c/jmr3904/make'
sed \
-e "s|[@]prefix[@]|/home/joel/rtems-cron-6/tools/6/bsp-install|" \
-e "s|[@]exec_prefix[@]|/home/joel/rtems-cron-6/tools/6/bsp-install/mips-rtems6|" \
-e "s|[@]pkgdatadir[@]|/home/joel/rtems-cron-6/tools/6/bsp-install/share/rtems5|" \

and this one which is error inducing.

: error trying to exec 'mips-rtems5-gcc': execvp: No such file or directory
error: compiling wrapper: Compiler error
gmake[5]: * [dl08-sym.o] Error 10

The first looks like a typo that isn't breaking anything but needs to be fixed.

The latter is some issue during the dl tests using rtems5 or it is hard-coded in a tool somewhere.

Change History (1)

comment:1 Changed on 12/16/21 at 15:48:27 by Joel Sherrill

Resolution: worksforme
Status: assignedclosed
Note: See TracTickets for help on using tickets.