Opened on 01/23/18 at 21:18:19

Closed on 01/31/18 at 23:52:37

#3278 closed defect (fixed)

bsp-builder has incorrect print (%s in output)

Reported by: Joel Sherrill Owned by: Chris Johns
Priority: normal Milestone: 5.1
Component: tool Version: 5
Severity: normal Keywords:
Cc: Blocked By:
Blocking:

Description

I don't think the tools have branches so only impacts master.

Notice the "run: %s:"

[1114/1565] powerpc/mpc5674fevb (profiling) Configuring
run: %s: powerpc/mpc5674fevb.profiling\

/home/joel/rtems-work/rtems/configure --target=powerpc-rtems5\
--enable-rtemsbsp=mpc5674fevb --prefix=/home/joel/rtems-work/bsps\
--enable-profiling

Change History (2)

comment:1 Changed on 01/23/18 at 21:18:35 by Joel Sherrill

Owner: set to Chris Johns
Status: new → assigned

comment:2 Changed on 01/31/18 at 23:52:37 by Chris Johns <chrisj@…>

Resolution: → fixed
Status: assigned → closed

In 005f995/rtems-tools:

rtems-bsp-builder: Remove stray %s from the run log message.

Close #3278

Note: See TracTickets for help on using tickets.