#3223 accepted enhancement

libbsd: wpa_supplicant has to be started dynamically

Reported by: Christian Mauderer Owned by: Christian Mauderer
Priority: normal Milestone: Indefinite
Component: network/libbsd Version: 5
Severity: normal Keywords: SoC libbsd WiFi WLAN
Cc: Blocked By:


To connect to a WPA encrypted network using libbsd it is currently necessary to restart the wpa_supplicant for each new connection. A better solution for that should be found.

In FreeBSD, the wpa_supplicant will somehow automatically be started if the ifconfig_<interface> line or rc.conf contains a WPA (see rc.conf(5) section network_interfaces).

The rtems-libbsd should have a similar mechanism. One possibility would be to try to make the dhcpcd script hooks usable on RTEMS and start wpa_supplicant from a hook.

Change History (4)

comment:1 Changed on Jan 3, 2018 at 8:28:21 PM by Christian Mauderer

Keywords: SoC added

comment:2 Changed on Jan 3, 2018 at 8:31:18 PM by Christian Mauderer

If wpa_supplicant is started dynamically, it would be necessary to make sure that more than one instance can be started at the same time.

comment:3 Changed on Jan 18, 2018 at 7:54:41 PM by Christian Mauderer

Owner: set to Christian Mauderer
Status: newaccepted

comment:4 Changed on Jan 18, 2018 at 8:06:51 PM by Christian Mauderer

Possible Approaches

The DHCP client used in the libbsd (dhcpcd) has a script hook support. That support has been removed in the RTEMS port because there is no script interpreter. One possibility would be to try to make the dhcpcd script hooks usable on RTEMS so that they can call C functions instead of the scripts. Such a hook could then start a wpa_supplicant from a hook.

Another solution would be to take a detailled look at the FreeBSD implementation and create something similar.

Additional Problems

Most likely it will be necessary to start more then one instance of wpa_supplicant (for example if two interfaces are connected). Currently that is not possible. The wpa_supplicant should be reviewed whether it can be started multiple times in parallel.

Necessary Hardware

I would recommend some real hardware (like a Beagle Bone Black with a RTL8188 based USB WiFi? dongle) and a hardware debugger (Segger J-Link, Flyswatter 2, something supported by OpenOCD, ...). Real hardware with WiFi? is the most likely later use case.

Theoretically WPA should be usable on wired interfaces. So it might be possible to develop this in a simulator too. The advantage of this is that there are no hardware costs and a simple debug integration. If you think about that solution, please discuss it with your (planned) mentor before starting.

Related projects

#3222 will need some WiFi? related rc.conf integration too. Maybe the hot-plug detection of that project could be of some use too.

Version 0, edited on Jan 18, 2018 at 8:06:51 PM by Christian Mauderer (next)
Note: See TracTickets for help on using tickets.