Opened on 02/06/16 at 12:17:37
Closed on 04/02/20 at 15:36:38
#2562 closed defect (fixed)
RSB Docs Quick Start version number
Reported by: | Gedare Bloom | Owned by: | Gedare Bloom |
---|---|---|---|
Priority: | normal | Milestone: | 5.1 |
Component: | tool/rsb | Version: | 5 |
Severity: | normal | Keywords: | documentation |
Cc: | Blocked By: | ||
Blocking: |
Description
The quick start in the RSB docs only refers to version 4.11 in the examples. It may be worth a brief paragraph about RTEMS version numbers here to help orient new users since, if they follow these directions, they will not be able to build the master.
Attachments (3)
Change History (11)
comment:1 Changed on 05/11/17 at 07:31:02 by Sebastian Huber
Milestone: | 4.12 → 4.12.0 |
---|
comment:2 Changed on 11/09/17 at 06:27:14 by Sebastian Huber
Milestone: | 4.12.0 → 5.1 |
---|
comment:3 Changed on 10/14/18 at 00:50:11 by Chris Johns
Owner: | changed from Chris Johns to Gedare Bloom |
---|---|
Status: | new → assigned |
That would be nice to have. Please update once Joel pushes his changes to the Quick Start. Thanks.
comment:4 Changed on 11/18/18 at 14:04:04 by shashvat jain
I generalized the release version of RTEMS with "urversion" in rtems-docs/rsb
and rtems-docs/user ,and specified a paragraph regarding the same below the commands.
I also made a table in the Quick Start and rsb/project-sets page which displays the
released versions and their status.
here is the details of the table
release notes | status |
5 | development |
4.11 | current release |
4.10 | previous release |
here is what the note says
"In the above commands and all commands on this page, urversion gives the version
of RTEMS you are building or want to build. Replace it with reference to release version table on *projects sets* page ."
The patch with all changes made has been added to the attachments
Changed on 11/18/18 at 14:21:31 by shashvat jain
Attachment: | 0001-version-number-notation-Ticket-2562-GCI-2018.patch added |
---|
comment:5 Changed on 11/18/18 at 21:36:07 by Chris Johns
The user manual is for a single release. I think it would be confusing to mention others releases or to make the manual appear suitable for other releases. For example the manual has command lines for tools which vary between releases and so it will not be correct for at least one release.
May I suggest you run the commands listed and update the output for RTEMS 5.
comment:6 Changed on 11/21/18 at 08:59:13 by shashvat jain
I have added a paragraph about version numbers in the quick start and updated the outputs of the commands at quick start
I am unable to give the patch file because of spam message,please help me with this.
Changed on 11/21/18 at 17:00:26 by shashvat jain
Attachment: | 0001-Added-version-nembers-guidelines-and-output-to-comma.patch added |
---|
New patch
Changed on 11/21/18 at 17:43:30 by shashvat jain
Attachment: | 0001-Closes-Ticket-2562.patch added |
---|
docs: add version number guidelines and quick start output , this patch closes this ticket.
comment:7 Changed on 12/13/19 at 15:36:10 by Chris Johns
Is this in the documentation? I cannot see it in the user of eng manuals.
comment:8 Changed on 04/02/20 at 15:36:38 by Gedare Bloom <gedare@…>
Resolution: | → fixed |
---|---|
Status: | assigned → closed |
Milestone renamed