|
|
@9bbfb2b6
|
03/12/20 20:59:35 |
joel |
lpc23xx_tli800-testsuite.tcfg: Add ttest01
5
|
|
|
@ae6597f
|
03/12/20 20:59:10 |
joel |
lpc2362-testsuite.tcfg: Add ttest01
5
|
|
|
@16ed7f64
|
03/12/20 20:53:51 |
joel |
lm3s3749-testsuite.tcfg: Add ttest01
5
|
|
|
@0161b93d
|
03/03/20 18:23:53 |
Sebastian Huber |
imfs: Replace devfs with an IMFS specialization
Add a simplified path …
5
|
|
|
@097ea1e
|
03/05/20 23:51:12 |
joel |
psim: Rework device tree so devices do not conflict with 256MB RAM
…
5
|
|
|
@2220a53
|
02/25/20 13:07:35 |
jan.sommer |
bsp/pc386: Fix interrupt enable to make debug option work again
5
|
|
|
@61e2d73f
|
02/27/20 07:21:17 |
Sebastian Huber |
bsp/mpc5643l_*: Exclude some tests
These tests do not fit into the …
5
|
|
|
@51614bd5
|
02/15/20 10:14:32 |
Sebastian Huber |
bsps/clock: Use _SMP_Get_processor_maximum()
Use a specific test to …
5
|
|
|
@e58ecb84
|
02/21/20 13:21:33 |
Sebastian Huber |
bsps/arm: Initialize priorities of PPIs
At least on GICv1 the …
5
|
|
|
@7006f08
|
02/12/20 14:09:39 |
dennis.pfau |
drvmgr: Fix determination of prefix in grlib uart driver
…
5
|
|
|
@f53473f
|
02/09/20 19:21:44 |
gsnb.gn |
bsp/raspberrypi: Mini UART driver
This patch adds driver for Mini …
5
|
|
|
@5857e83c
|
02/09/20 19:21:43 |
gsnb.gn |
libchip/ns16550: Allow user calculate baud divisor
This patch will …
5
|
|
|
@32991495
|
12/09/19 15:03:11 |
Sebastian Huber |
score: Statically allocate idle/MPCI stacks
Place idle and MPCI …
5
|
|
|
@b900f507
|
02/12/20 07:53:35 |
Sebastian Huber |
arm/xilinx-zynq: Split console driver files
This avoids to pull in …
5
|
|
|
@adf7e753
|
02/10/20 09:35:17 |
christian.mauderer |
bsp/imx: Parse fdt pinctrl values and setup iomux
Update #3869.
5
|
|
|
@b58f994
|
02/10/20 09:35:16 |
christian.mauderer |
bsp/imx: Support imx6ul iomux.
Update #3869.
5
|
|
|
@d00d690
|
02/10/20 09:35:15 |
christian.mauderer |
bsp/imx: Allow gapless SPI transfers.
This uses the tx-threshold to …
5
|
|
|
@9c7bffb
|
02/10/20 09:35:14 |
christian.mauderer |
bsp/imx: Use muxed mode for serials.
Update #3869.
5
|
|
|
@65e51e9f
|
02/10/20 09:35:13 |
Sebastian Huber |
bsp/imx: Increase device memory area
The new area is used by the i.MX …
5
|
|
|
@c561bf4c
|
02/10/20 09:35:12 |
christian.mauderer |
bsp/imx: Allow GIC in different device tree node.
Update #3869.
5
|
|
|
@8854a2b5
|
02/10/20 09:35:11 |
Sebastian Huber |
bsp/imx: Avoid hard-coded GIC base address
Update #3869.
5
|
|
|
@2d07ce6
|
02/04/20 14:26:31 |
Sebastian Huber |
config: Add CONFIGURE_DIRTY_MEMORY
Replace the BSP_DIRTY_MEMORY BSP …
5
|
|
|
@c344e58
|
02/02/20 10:00:54 |
Sebastian Huber |
Use RTEMS_SYSINIT_ORDER_LAST_BUT_5
Use RTEMS_SYSINIT_ORDER_LAST_BUT_5 …
5
|
|
|
@eea21eac
|
12/13/19 05:18:36 |
Sebastian Huber |
bsps: Rework work area initialization
The work area initialization …
5
|
|
|
@07e2eac
|
12/13/19 13:22:16 |
Sebastian Huber |
bsps: Remove uses of BSP_GET_WORK_AREA_DEBUG
The code covered by …
5
|
|
|
@34a7a12f
|
12/12/19 15:02:19 |
Sebastian Huber |
bsps: Add RTEMS_SYSINIT_BSP_EARLY
Add new BSP system initialization …
5
|
|
|
@ffa1153
|
12/14/19 20:36:09 |
Sebastian Huber |
bsps: Add RamEnd? to linker command files
Update #3838.
5
|
|
|
@ebf0f8f
|
08/16/19 19:14:33 |
kinsey.moore |
bsps/arm/shared: Add GICv3 implementation
This adds support for the …
5
|
|
|
@362cf319
|
01/04/20 19:50:46 |
gsnb.gn |
bsp/raspberrypi: Updated the console API.
Replaces the legacy termios …
5
|
|
|
@eca25ef
|
01/03/20 03:26:14 |
gsnb.gn |
bsp/raspberrypi: Enable FDT support.
This commit adds FDT support to …
5
|
|
|
@f1f6cd95
|
12/27/19 21:08:12 |
christian.mauderer |
bsp/raspberrypi: Fix size of work area.
The BSP tried to get the size …
5
|
|
|
@c51f1fc5
|
12/27/19 21:08:11 |
christian.mauderer |
bsps/arm: Define index of the workspace entry.
The imx BSP contained …
5
|
|
|
@739e3d0
|
01/03/20 18:33:02 |
Gedare Bloom |
bsps/irq: fix resource leak in irq-server.c
Resource leak identified …
5
|
|
|
@a3706d4c
|
01/02/20 06:54:06 |
Sebastian Huber |
bsps/powerpc: Fix warning
Update #3834.
5
|
|
|
@86abbb6e
|
12/19/19 11:05:45 |
Sebastian Huber |
bsps/powerpc: Support constructors with priority
Close #3339.
5
|
|
|
@2497da06
|
12/19/19 09:59:20 |
Sebastian Huber |
bsps/arm: Export bsp_start_hook_0_done
Close #3789.
5
|
|
|
@24f8915
|
12/12/19 06:11:54 |
Sebastian Huber |
config: Add _MPCI_Configuration
Replace the user MPCI configuration …
5
|
|
|
@a00dff42
|
12/12/19 05:37:01 |
Sebastian Huber |
rtems: Add and use rtems_object_get_local_node()
Update #3841.
5
|
|
|
@84aee2e9
|
12/10/19 07:09:13 |
Sebastian Huber |
mpci: Simplify MPCI configuration
Use watchdog for shared memory …
5
|
|
|
@bb99cd0d
|
12/05/19 18:22:33 |
Sebastian Huber |
clock: Simplify driver initialization
Use a system initialization …
5
|
|
|
@a6b2080
|
12/05/19 14:51:17 |
Sebastian Huber |
clock: Remove Clock_exit() from API
This function is no longer …
5
|
|
|
@1380c822
|
12/05/19 06:51:12 |
Sebastian Huber |
bsp/xen: Use BSP options for all linkcmds vars
Update #3818.
5
|
|
|
@4c30acf
|
12/04/19 14:29:33 |
jeff.kubascik |
bsp/xen: Create BSP
Create the Xen BSP for Xen on ARM.
5
|
|
|
@b51a1d0
|
12/04/19 14:29:32 |
jeff.kubascik |
bsps/arm: Unmask generic timer in interrupt handler
Xen will mask the …
5
|
|
|
@001cd9bd
|
12/04/19 14:29:31 |
jeff.kubascik |
bsps/arm: Add zImage boot header
Xen currently only supports the …
5
|
|
|
@f4fda72
|
11/29/19 18:01:00 |
Sebastian Huber |
Regenerate headers.am
5
|
|
|
@05a32e15
|
11/21/19 09:31:26 |
Sebastian Huber |
bsp/mpc55xxevb: Remove obsolete linker cmd file
Update #3818.
5
|
|
|
@3e9f5a55
|
11/21/19 08:46:56 |
Sebastian Huber |
bsp/gen83xx: Remove obsolete linker command file
Update #3818.
5
|
|
|
@741fe47
|
11/19/19 15:02:50 |
Sebastian Huber |
bsp/lpc32xx: Fix linker command file
5
|
|
|
@a52d6174
|
11/19/19 14:22:14 |
Sebastian Huber |
bsp/imx7: Rename linker command file
This BSP family uses only one …
5
|
|
|
@af321aa
|
11/19/19 13:49:43 |
Sebastian Huber |
bsp/altcycv_devkit: Rename linker command file
This BSP family uses …
5
|
|
|
@12a263bb
|
11/18/19 14:24:05 |
Sebastian Huber |
bsp/atsamv: Fix warning
5
|
|
|
@41ab50e4
|
11/14/19 14:03:08 |
Sebastian Huber |
bsp/t32mppc: Rename linker command file
This BSP family uses only one …
5
|
|
|
@bc28b65
|
11/14/19 14:02:03 |
Sebastian Huber |
bsp/beagle: Rename linker command file
This BSP family uses only one …
5
|
|
|
@ae554670
|
11/14/19 10:20:41 |
Sebastian Huber |
bsp/riscv: Fix format and warnings
Update #3785.
5
|
|
|
@e9ae7436
|
11/14/19 10:15:19 |
Sebastian Huber |
bsp/riscv: Fix use of uninitialized integer
5
|
|
|
@df9426f
|
11/14/19 10:08:28 |
Sebastian Huber |
bsp/riscv: riscv_get_core_frequency()
Always provide this function. …
5
|
|
|
@3dcfee37
|
11/14/19 09:29:24 |
Sebastian Huber |
bsp/gumstix: Fix warning
5
|
|
|
@f9648ba
|
10/28/19 09:15:28 |
Sebastian Huber |
bsps/arm: Add support for small pages MMU
The small page MMU support …
5
|
|
|
@044687d3
|
03/31/19 12:49:19 |
Hesham.Almatary |
bsps/riscv: UART - Read reg-shift from DTB to properly set/get registers
5
|
|
|
@94481ce
|
10/24/19 12:05:07 |
Hesham.Almatary |
riscv: Add new BSP cfg variants to be built with llvm/clang
5
|
|
|
@ce5988e
|
10/23/19 11:52:54 |
Hesham.Almatary |
riscv: Add new offending input sections to the linker script
5
|
|
|
@7f0c41c7
|
10/23/19 11:50:55 |
Hesham.Almatary |
riscv: Add NOLOAD directive to the .work section
ld.lld defaults …
5
|
|
|
@f462bcb
|
10/23/19 11:43:17 |
Hesham.Almatary |
riscv: Address differences in the linkerscript between GNU LD and …
5
|
|
|
@ca82ded7
|
10/23/19 11:37:12 |
Hesham.Almatary |
riscv: Generate linkcmds.base from the shared linkcmds.base.in
This …
5
|
|
|
@d2efc968
|
10/23/19 12:16:47 |
Sebastian Huber |
bsp/xilinx-zynq: Simplify linkcmds config
Use NULL-pointer protection …
5
|
|
|
@1e1afa37
|
10/23/19 12:03:39 |
Sebastian Huber |
bsp/xilinx-zynqmp: Simplify linkcmds config
Do all calculations in …
5
|
|
|
@9620dfa4
|
10/15/19 15:10:01 |
christian.mauderer |
bsp/atsam: Use PIO for SC16IS752.
This allows to mix SC16IS752 chips …
5
|
|
|
@d60b6d7c
|
10/15/19 15:10:00 |
christian.mauderer |
bsp/atsam: Add additional PIO helper.
5
|
|
|
@d4b92da2
|
10/15/19 15:09:59 |
christian.mauderer |
bsps/atsam: Improve case for level triggered IRQs.
For level …
5
|
|
|
@a7f5e42c
|
10/22/19 10:20:05 |
pragnesh.patel |
riscv: add freedom E310 Arty A7 bsp
Added support for Sifive Freedom …
5
|
|
|
@2fdbdbc
|
10/19/19 04:53:50 |
Chris Johns |
arm/beanglebone: Fix i2c build error.
5
|
|
|
@be3d6974
|
10/01/19 06:54:20 |
Sebastian Huber |
bsp/erc32: Improve pseudo-SMP support
Add support for …
5
|
|
|
@33ed412
|
09/20/19 07:16:17 |
Sebastian Huber |
rtems: Add rtems_interrupt_server_entry_move()
The use case for this …
5
|
|
|
@a4e96cf
|
09/17/19 20:46:05 |
vijaykumar9597 |
bsps/beagle: register i2c device at initialization
5
|
|
|
@c331bdc
|
08/30/19 06:14:59 |
Sebastian Huber |
record: Allow tracing of ISR disable/enable
Directly use the CPU port …
5
|
|
|
@15b6f44d
|
08/12/19 03:58:31 |
Chris Johns |
arm/tlb: Fix the MP affinity check to invalidate ASIDs.
- The TI's …
5
|
|
|
@a4d7e4ce
|
08/06/19 10:00:56 |
Chris Johns |
arm/raspberry: Set the workspace based on the mailbox version.
- …
5
|
|
|
@9cb19ded
|
08/04/19 23:58:07 |
Chris Johns |
libdl/debugger: Fix the broken list delete when unloading an object …
5
|
|
|
@886956a
|
08/02/19 20:57:01 |
vijaykumar9597 |
bsp/beagle: Add nocache section
Closes #3780
5
|
|
|
@163927e5
|
07/30/19 19:14:16 |
christian.mauderer |
bsps/beagle: Remove dead code from GPIO.
Remove static stuff that is …
5
|
|
|
@7d4f74e
|
06/25/19 11:16:27 |
Chris Johns |
arm/beagle: Add libdebugger support.
- Port the jbang code from C++ …
5
|
|
|
@98d6792
|
06/25/19 10:48:51 |
Chris Johns |
arm: Select the TLB invalidate based on the core's Id variant.
Closes …
5
|
|
|
@c5fd79cd
|
07/29/19 05:22:03 |
Sebastian Huber |
arm/raspberrypi: Fix linker map
Add NULL-pointer protection. Make …
5
|
|
|
@5ee70c5
|
07/30/19 04:24:00 |
Sebastian Huber |
Add and use THREAD_DEFAULT_MAXIMUM_NAME_SIZE
5
|
|
|
@1e6380b
|
07/26/19 06:12:20 |
Sebastian Huber |
bsps/arm: Move HYP to SVC change to start.S
This fixes the corruption …
5
|
|
|
@0ee2125
|
07/26/19 05:59:27 |
Sebastian Huber |
bsps/arm: Move register init to start.S
This makes it easier to …
5
|
|
|
@0f5c1d53
|
07/26/19 05:54:05 |
Sebastian Huber |
bsps/arm: Remove register init for ARMv7-M
There are no known ARMv7-M …
5
|
|
|
@e9c83b4
|
07/05/19 07:03:58 |
Sebastian Huber |
bsps: Regenerate headers.am
Update #3269.
5
|
|
|
@b89d6cc
|
06/24/19 20:16:59 |
christian.mauderer |
bsp/beagle: Partial re-write of I2C driver.
The old driver worked …
5
|
|
|
@c43071f
|
06/25/19 08:43:55 |
Chris Johns |
arm: Return the current handler from arm_cp15_set_exception_handler
…
5
|
|
|
@9b858ee
|
06/27/19 12:34:23 |
Sebastian Huber |
bsp/motorola_powerpc: Fix linker command file
Fix the size symbol …
5
|
|
|
@dc581f2
|
06/21/19 04:58:19 |
Sebastian Huber |
bsp/atsam: Enable configuration of SDRAMC_LPR
5
|
|
|
@a67b9b06
|
06/18/19 10:52:53 |
Sebastian Huber |
atsam: Add ATSAM_POWER_WAIT_MODE
5
|
|
|
@522cde4
|
06/18/19 09:31:48 |
Sebastian Huber |
atsam: Enable fast startup via RTC alarm
5
|
|
|
@bb24892
|
06/18/19 09:10:55 |
Sebastian Huber |
bsp/atsam: Use proper API
5
|
|
|
@d7d0bba
|
06/13/19 06:44:04 |
Sebastian Huber |
bsp/atsam: Do not disable the WDT
The watchdog timer (WDT) can be …
5
|
|
|
@ee36616
|
06/12/19 10:53:22 |
Sebastian Huber |
bsp/atsam: Improve RTC power driver
Accept a time interval up to 24h.
5
|
|
|
@5d4a81f5
|
06/12/19 10:51:20 |
Sebastian Huber |
bsp/atsam: Fix RTC_SetTimeAlarm()
Set the alarm time according to the …
5
|
|
|
@98fc6014
|
06/04/19 10:04:55 |
Sebastian Huber |
bsp/lpc24xx: Fix LPC24XX_IO_PORT_COUNT
5
|
|
|