|
|
@29a73d8
|
07/17/20 05:54:44 |
christian.mauderer |
bsp/imx: Use GPIOs for SPI CS
The chip select lines of the iMX SPI …
|
|
|
@0f4b911c
|
07/17/20 05:54:43 |
christian.mauderer |
bsp/imx: Add a GPIO driver
Update 3869
|
|
|
@01219541
|
03/30/20 14:38:22 |
christian.mauderer |
bsp/imx: Add an extra ecspi clock.
Some imx chips or boards don't use …
5
|
|
|
@adf7e753
|
02/10/20 09:35:17 |
christian.mauderer |
bsp/imx: Parse fdt pinctrl values and setup iomux
Update #3869.
5
|
|
|
@b58f994
|
02/10/20 09:35:16 |
christian.mauderer |
bsp/imx: Support imx6ul iomux.
Update #3869.
5
|
|
|
@d00d690
|
02/10/20 09:35:15 |
christian.mauderer |
bsp/imx: Allow gapless SPI transfers.
This uses the tx-threshold to …
5
|
|
|
@9c7bffb
|
02/10/20 09:35:14 |
christian.mauderer |
bsp/imx: Use muxed mode for serials.
Update #3869.
5
|
|
|
@65e51e9f
|
02/10/20 09:35:13 |
Sebastian Huber |
bsp/imx: Increase device memory area
The new area is used by the i.MX …
5
|
|
|
@c561bf4c
|
02/10/20 09:35:12 |
christian.mauderer |
bsp/imx: Allow GIC in different device tree node.
Update #3869.
5
|
|
|
@8854a2b5
|
02/10/20 09:35:11 |
Sebastian Huber |
bsp/imx: Avoid hard-coded GIC base address
Update #3869.
5
|
|
|
@c344e58
|
02/02/20 10:00:54 |
Sebastian Huber |
Use RTEMS_SYSINIT_ORDER_LAST_BUT_5
Use RTEMS_SYSINIT_ORDER_LAST_BUT_5 …
5
|
|
|
@eea21eac
|
12/13/19 05:18:36 |
Sebastian Huber |
bsps: Rework work area initialization
The work area initialization …
5
|
|
|
@c51f1fc5
|
12/27/19 21:08:11 |
christian.mauderer |
bsps/arm: Define index of the workspace entry.
The imx BSP contained …
5
|
|
|
@a52d6174
|
11/19/19 14:22:14 |
Sebastian Huber |
bsp/imx7: Rename linker command file
This BSP family uses only one …
5
|
|
|
@c991eeec
|
03/04/19 14:32:15 |
Sebastian Huber |
bsps: Adjust bsp.h Doxygen groups
Update #3706.
5
|
|
|
@9edc558d
|
12/20/18 13:21:40 |
Sebastian Huber |
bsp/imx: Fix for RAM end at 4GiB
5
|
|
|
@01595a4
|
10/24/18 08:17:58 |
Sebastian Huber |
bsp/imx: Adjust workspace according to device tree
5
|
|
|
@d7c13c8
|
10/16/18 12:34:38 |
Sebastian Huber |
bsp/imx7: Add getchark() support
5
|
|
|
@69a24c3
|
09/21/18 05:38:23 |
Sebastian Huber |
bsp/imx: Add imx_ccm_sdhci_hz()
Update #3525.
5
|
|
|
@511dc4b
|
06/19/18 07:09:51 |
Sebastian Huber |
Rework initialization and interrupt stack support
Statically …
5
|
|
|
@276afd2b
|
04/23/18 07:48:52 |
Sebastian Huber |
bsps: Move SPI drivers to bsps
This patch is a part of the BSP source …
5
|
|
|
@a2dad96
|
04/23/18 07:45:28 |
Sebastian Huber |
bsps: Move I2C drivers to bsps
This patch is a part of the BSP source …
5
|
|
|
@adb85dd
|
04/21/18 08:22:08 |
Sebastian Huber |
bsps: Move make/custom/* files to bsps
Adjust various build files. …
5
|
|
|
@9964895
|
04/20/18 08:35:35 |
Sebastian Huber |
bsps: Move startup files to bsps
Adjust build support files to new …
5
|
|
|
@d7d66d7
|
04/19/18 04:28:01 |
Sebastian Huber |
bsps: Move console drivers to bsps
This patch is a part of the BSP …
5
|
|
|
@2afb22b
|
12/23/17 07:18:56 |
Chris Johns |
Remove make preinstall
A speciality of the RTEMS build system was the …
5
|