source: rtems-source-builder/rtems

Revision Log Mode:


Copied or renamed
Diff Rev Age Author Log Message
(edit) @0dd3013   09/15/13 22:25:42 Chris Johns rtems: Newlib version CVS 15-Sept-2013
(edit) @f4a8a42   09/06/13 05:56:59 Chris Johns rtems: Revert gdb to gdb-7.6 as gdb-7.6.1 fails.
(edit) @169619c   09/02/13 23:20:17 Chris Johns config: Disable building RTEMS by default. To build use --with-rtems.
(edit) @18b01e8   09/02/13 22:33:08 Chris Johns config: Update RTEMS to gdb-7.6.1.
(edit) @51a669f   08/22/13 01:41:10 Chris Johns config: Disable ICONV support for the m32c.
(edit) @407f7ff   08/21/13 02:36:08 Chris Johns config: Fix the without_rtems macro.
(edit) @27d6ea0   08/14/13 04:06:30 Chris Johns config: Add support for iconv encodings. Turn off iconv support for …
(edit) @5118d73   08/14/13 04:05:57 Chris Johns config: Change to use the GCC POSIX thread model.
(edit) @b830445   08/14/13 04:04:53 Chris Johns config: Support --without-rtems to not build RTEMS. The default is to …
(edit) @9e9162b   08/08/13 01:45:12 Chris Johns config: Do not build autotools when building 4.11/rtems-all.
(edit) @ff0fc8e   08/08/13 01:43:52 Chris Johns config: Check the path for a valid autoconf.
(edit) @9c150cf   07/23/13 12:19:34 Chris Johns config: PR 2134 - Return the missing =.
(edit) @6d32fe7   07/20/13 22:55:11 Chris Johns CONFIG: PR 2127 - Build fails on Linux. Fix shell tests where '==' …
(edit) @ebf8a1f   07/16/13 00:02:41 Chris Johns Automtically build the Autotools to bootstrap RTEMS. This changes …
(edit) @c2effc1   07/16/13 00:01:19 Chris Johns Move newlib to 14-Jul-2013. Build with Sebastian's pending upstream …
(edit) @bfee78b   07/16/13 00:00:13 Chris Johns Ignore log_* log files.
(edit) @a06414c   06/19/13 04:41:58 Chris Johns Use target flags that lets the AVR tools build.
(edit) @9e0f6af   06/19/13 04:37:48 Chris Johns Update the NIOS tools to support Cxc.
(edit) @8113b76   06/06/13 05:13:18 Chris Johns m32c: As per GCC PR 50928 use -O0 to build libgcc.
(edit) @c36107a   05/31/13 23:38:54 Chris Johns gcc: RTEMS 4.11 uses 4.8.1 release.
(edit) @699a5e58   05/31/13 23:20:12 Chris Johns Reset the CVS repo each run to remove any applied patches.
(edit) @47d7a552   05/31/13 22:49:27 Chris Johns newlib: Move to 31-May-2013. Fix the stack_t patcher.
(edit) @6bf5b3f   05/31/13 02:56:28 Chris Johns Add Joel's stack_t patch.
(edit) @07aee95   05/31/13 02:56:08 Chris Johns Patch merged upstream.
(edit) @347e182   05/22/13 06:00:07 yinyan fix the problems for the set build of 4.9 and 4.10 1. "expat-2.1.0-1 …
(edit) @54c7330   05/22/13 06:51:27 verm Add newlib-remove-machine-powerpc-times_c.diff to powerpc build.
(edit) @d925ea3   05/20/13 07:19:47 Chris Johns Align the 4.8 and 4.5 configurations with the gcc-common.
(edit) @06c0200   05/18/13 00:56:02 verm Fix prepend /moxie/ to path location. Fixes downloading.
(edit) @7142b8f   05/18/13 00:55:28 verm Remove .git in rtem-tools repo after repo name cleanup. This fixes …
(edit) @5172f31   05/16/13 23:56:30 cynt6007 Update the buildset to use automake-1.12.6, which is required by …
(edit) @a08fcae   05/16/13 08:19:54 verm Add moxie patch, this fixes the build.
(edit) @53027a9   05/15/13 03:23:08 Chris Johns Moxie GDB patch has been merged upstream.
(edit) @1a56a07   05/14/13 01:08:02 Chris Johns Add bare/config and move the source-builder/config to it. Rework the …
(edit) @df9c081   05/13/13 04:48:31 Chris Johns Newlib CVS: 13-May-2013. Pick up the atexit changes.
(edit) @dd8534a   05/09/13 22:33:44 Chris Johns MIPS patches in newlib head and we are using that.
(edit) @bc19332   05/07/13 23:56:59 Chris Johns Newlib 8-May-2013: Include Sebastian's atexit changes.
(edit) @0e358bf   05/07/13 23:56:16 Chris Johns By default hard reset the RTEMS repo on a build.
(edit) @a6d6d31   05/03/13 00:39:30 Chris Johns Forgot to remove the master branch from the URL.
(edit) @6159bfd   05/03/13 00:08:06 Chris Johns Reset the repo before the pull it avoid any local changes effecting things.
(edit) @cd3d3ae   05/02/13 21:53:41 Chris Johns Move to the gcc-4.8 branch until 4.8.1 comes out.
(edit) @1aade53   04/30/13 05:09:13 Chris Johns rtems-4.11: binutils 2.23.2, gcc-4.8.0, newlib-cvs-30-April-2013, gdb-7.6
(edit) @a48a478   04/30/13 05:01:30 Chris Johns Updated 4.11 tool versions.
(edit) @c931fbe   04/29/13 22:19:15 Joel Sherrill rtems/config/4.11/rtems-*.bset: Add gdb based BSPs for testing Also …
(edit) @699a51c5   04/29/13 00:23:06 Chris Johns Fix the C++ tools detection bug.
(edit) @a702d9f   04/28/13 22:57:17 Chris Johns Remove the .cfg. Not needed.
(edit) @c4c8a12   04/28/13 22:52:24 Chris Johns The BSP list is comma seperated.
(edit) @41219dc   04/28/13 07:49:34 Chris Johns Remove the lm3s3749 BSP because it does not build with head …
(edit) @b3b8dd3   04/28/13 02:54:47 Chris Johns Always build RTEMS.
(edit) @c12323f   04/28/13 02:54:00 Chris Johns Undefine rtems_bsp is set to all. Configure without bsps means all.
(edit) @3ff992b   04/27/13 10:34:47 Chris Johns Disable C++ if not built. Use the faster bootstrap.
(edit) @ccaa68e   04/27/13 10:28:19 Chris Johns Disable selects for the NIOS due to the specific versions needed.
(edit) @8029c99   04/25/13 05:06:44 Chris Johns Undefine all possible patches.
(edit) @9131a56   04/24/13 07:32:49 Chris Johns Move the common snapshots to the common config tree. Add gdb.
(edit) @86b2b4f   04/23/13 06:03:25 Chris Johns Add support to check for a valid autoconf for RTEMS.
(edit) @f077b2b   04/22/13 12:28:27 Chris Johns Fixes for CVS to work. Add RTEMS build for sparc/sis.
(edit) @4ce931b   04/20/13 11:47:28 Chris Johns Add CVS download support. These changes complete the CVS download support.
(edit) @1bab165   04/16/13 04:44:54 Chris Johns Add snapshot macros files. To use: ../source-builder/sb-set-builder …
(edit) @b022691   04/15/13 07:01:30 Chris Johns Override the target build flags.
(edit) @cc2c48b   04/14/13 22:30:25 Chris Johns Switch to the regenerated gcc-4.7.3 patch.
(edit) @3e86a96   04/14/13 08:08:10 Chris Johns Update RTEMS 4.11 to GCC 4.7.3. All build sets for RTEMS 4.11 that …
(edit) @3760113   04/05/13 03:24:33 Chris Johns Update to the patch Joel merged.
(edit) @8130026   04/02/13 21:43:36 Chris Johns Add the 32bit host fix for EABI.
(edit) @df1a0d6   04/02/13 10:07:15 Chris Johns PR 2105. Changed the unstable build sets to use rtems_arch.
(edit) @4f26bdb   04/01/13 04:19:56 Chris Johns Add Canadian Cross support. Add support to build MinGW tools using …
(edit) @aabe4e7   03/21/13 11:52:10 Chris Johns Use and not
(edit) @a8a3af2   03/21/13 11:45:15 Chris Johns Build RTEMS 4.9.6.
(edit) @02711d6   03/21/13 04:47:27 Chris Johns Add more RTEMS 4.9 architectures.
(edit) @d19391d   03/20/13 06:28:42 Chris Johns Patch to fix bfin simulator.
(edit) @2a37e1a   03/20/13 05:04:13 Chris Johns Add RTEMS patch support.
(edit) @fcf7889   03/19/13 22:46:56 Chris Johns Remove files added in error.
(edit) @0eb48e1   03/19/13 22:46:42 Chris Johns Minor clean up.
(edit) @18917ba   03/19/13 22:46:12 Chris Johns Add emacs temp files to the ignore list.
(edit) @aa8e600   03/19/13 22:43:12 Chris Johns Use the common base set definitions.
(edit) @e3aa355   03/19/13 22:41:23 Chris Johns Add support for RTEMS 4.10. This change adds support for RTEMS 4.10 …
(edit) @5439e8f   03/19/13 03:28:40 mb.dhananjay GCC 4.7.2 is incompatible with Texinfo 5
(edit) @896a832   03/16/13 00:03:19 Chris Johns Use GMP 5.0.5 with MPFR 2.4.2 on gcc-4.3.2.
(edit) @0e25807   03/15/13 21:18:29 Chris Johns Add all, m68k and autotools build sets.
(edit) @3643c48   03/15/13 04:33:59 Chris Johns Add RTEMS 4.9 support for i386 and SPARC.
(edit) @1efc3f7   03/12/13 23:50:10 Chris Johns Add missing RTEMS patches to binutils-2.23.1.
(edit) @087dd50   03/12/13 10:54:31 Chris Johns Fix the binutils version change.
(edit) @e7f98ee   03/12/13 10:54:05 Chris Johns Fix the patch path.
(edit) @1f9e551   03/12/13 09:15:39 Chris Johns Switch to binutils-2.23.1.
(edit) @a57d9f0   03/12/13 09:09:22 Chris Johns Remove arch configurations as build sets are used.
(edit) @530b9c0   03/12/13 09:08:17 Chris Johns Use the latest GCC 4.7 ARM to EABI patch from Sebastian.
(edit) @2034d38   03/12/13 08:02:45 Chris Johns Move the PowerPC to %{rtems_arch}. It was missed.
(edit) @b3bc4cf   03/12/13 07:58:15 Chris Johns LM32 is fixed.
(edit) @19efefa   03/12/13 07:31:24 Chris Johns Disable SMP (--no-smp) for LM32.
(edit) @f40e52d   03/12/13 07:30:43 Chris Johns Include git info in the gcc version message.
(edit) @a77083a   03/12/13 05:50:53 Chris Johns Move the moxie gdb patches into the build set.
(edit) @c01a36b   03/12/13 04:44:55 Chris Johns Fix the moxie binutils patch name.
(edit) @4f67f78   03/11/13 11:39:10 Chris Johns Fix the patch path.
(edit) @3c5f4ec   03/11/13 06:15:04 Chris Johns Use the updated ARM EABI patch for gcc-4.7.2.
(edit) @3bab09c   03/11/13 02:55:56 Chris Johns Add support for build set patch options. Remove the hard coded …
(edit) @d007f05   03/11/13 00:10:42 Chris Johns Fix the base URL for the RTEMS git web interface.
(edit) @48e1cd4   03/10/13 23:58:40 Chris Johns Move all patches to the rtems-tools.git repo. All patches are now …
(edit) @3e1a845   03/10/13 03:53:08 Chris Johns Microblaze support for ldscript patch.
(edit) @fdc8e0c   03/10/13 03:52:04 Chris Johns Fix comments.
(edit) @98e7a7b   03/08/13 23:48:36 Chris Johns Patch to fix strsignal for the LM32 gcc-4.5.3.
(edit) @8301afa   03/08/13 21:12:47 Chris Johns Switch LM32 to gcc-4.5.3. This is the reported known working tool set …
(edit) @876f07d   03/08/13 08:10:33 Chris Johns MIPS Newlib 2.0.0 patches. Add the STX39 simulator. There are a …
Note: See TracRevisionLog for help on using the revision log.