# # $Id$ # RTEMS was developed by On-Line Applications Research (OAR) under contract to the U.S. Army Missile Command. Other than the contributions listed in this document, all code and documentation was developed by OAR for the Army. The RTEMS project would like to thank those who have made contributions to the project. Together we make RTEMS a much better product. The following persons/organizations have made contributions: + Dr. Mikhail (Misha) Savitski (mms@eiscathq.irf.se) of the EISCAT Scientific Association submitted the BSP and other miscellaneous support for the Motorola MVME162 (M68040LC CPU) VMEbus single board computer. + Division Inc. of Chapel Hill, NC for sponsoring On-Line Applications Research to port RTEMS to the Hewlett-Packard PA-RISC architecture (V1.1) and the addition of HP-UX as a development host. Tony Bennett (tbennett@divnc.com) was assisted in this effort by Joel Sherrill (joel@OARcorp.com). Tony also deserves a big pat on the back for contributing significantly to the overall organization of the development environment and directory structure. RTEMS is much easier to build because of Tony. + Greg Allen of Division Inc. of Chapel Hill, NC for porting RTEMS to HP-UX. This port treats a UNIX computer as simply another RTEMS target processor. This port can be used to develop and test code which will ultimately run on the embedded platform. + Doug McBride (mcbride@rodin.colorado.edu) of the Colorado Space Grant College at the University of Colorado at Boulder submitted the BSP for the Motorola IDP board (M68EC040 CPU) single board computer. The BSP leverages heavily off of the existing RTEMS BSP framework, the examples in the back of the IDP user's manual, and the libgloss example support for the IDP board from the newlib/libgloss distribution. + David Glessner (dwg@glenqcy.glenayre.com) of Glenayre Electronics submitted the support for the Motorola MC68302 CPU. This included the "gen68302" BSP which uses the on-chip peripherals on the MC68302 as well as the modifications to the m68k dependent executive code to support m68k family members based on the mc68000 core. + Bryce Cogswell (cogswell@cs.uoregon.edu) submitted the support for MS-DOS as a development environment as well as djgpp/go32 as a target environment. + Andy Bray (andy@i-cubed.demon.co.uk) of I-CUBED Ltd. in Cambridge U.K. for porting RTEMS to the PowerPC. This effort included support for the IBM 403 as well as the Motorola 601, 603, and 604 variants. A special thanks to Dom Latter (dom@i-cubed.demon.co.uk) for being an RTEMS evangelist and promoting the use of RTEMS both at I-CUBED Ltd. as well as within the Internet community as a whole. + John S. Gwynne (jsg@coulomb.eng.ohio-state.edu) of Ohio State University submitted the support for the Motorola MC68332 CPU as well as completing the support for CPUs based on the MC68000 core. This included the "efi68k" and "efi332" BSPs as well as completing the modifications to the m68k dependent executive code to support m68k family members based on the MC68000 core. "efi68k" and "efi332" are single board computers designed primarily for automotive electronic fuel injection (EFI) control, but can be considered general purpose controllers when used without the EFI companion board(s). See the README in each BSP for more information. + The European Space Agency for sponsoring On-Line Applications Research to port RTEMS to the SPARC V7 architecture for use with their ERC32 radiation-hardened CPU. Jiri Gaisler (jgais@wd.estec.esa.nl) deserves special thanks for championing this port within the ESA was well as for developing and supporting the SPARC Instruction Simulator used to develop and test this port. + Eric Norum (eric@skatter.usask.ca) of the Saskatchewan Accelerator Laboratory submitted the support for the Motorola MC68360 CPU including the `gen68360' BSP. + Dominique le Campion (Dominique.LECAMPION@enst-bretagne.fr), for Telecom Bretagne and T.N.I. (Brest, France) submitted the BSP for the Motorola MVME147 board (68030 CPU + 68881 FPU). + Craig Lebakken (lebakken@minn.net) and Derrick Ostertag (ostertag@transition.com) of Transition Networks of Eden Prairie, MN for porting RTEMS to the MIPS architecture. This submission includes support for the R4600 and R4650 MIPS models. Finally, the RTEMS project would like to thank those who have contributed to the other free software efforts which RTEMS utilizes. The primary RTEMS development environment is from the Free Software Foundation (the GNU project). The "newlib" C library was put together by Cygnus and is a collaboration of the efforts of numerous individuals and organizations. We would like to see your name here. BSPs and ports are always welcome. Useful libraries which support RTEMS applications are also an important part of providing a strong foundation for the development of real-time embedded applications and are welcome as submission.