2002-07-25 Ralf Corsepius * bootloader/em86real.S: Fix syntax error in comment near line 1185. 2001-05-14 Till Straumann * bootloader/misc.c, console/Makefile.am, console/console.c, console/consoleIo.h, console/inch.c, console/polled_io.c, console/uart.c, console/uart.h, include/bsp.h, irq/Makefile.am, irq/irq.c, irq/irq.h, irq/irq_init.c, openpic/openpic.c, openpic/openpic.h, pci/Makefile.am, pci/pci.c, pci/pci.h, residual/Makefile.am, start/start.S, startup/bspstart.c, vectors/vectors.S, vectors/vectors.h, vectors/vectors_init.c: Per PR216, "libbsp/powerpc/shared" BSP has been modified considerably with the goal to make it more flexible and reusable by other BSPs. The main strategies were: - eliminate hardcoded base addresses; devices use offsets and a BSP defined base address. - separate functionality into different files (e.g. reboot from inch.c to reboot.c) which can be overridden by a 'derived' BSP. - separate initialization code into separate files (e.g. PCI bridge detection/initialization was separated from the more generic PCI access routines), also to make it easier for 'derived' BSPs to substitute their own initialization code. There are also a couple of enhancements and fixes: - IRQ handling code now has a hook for attaching a VME bridge. - OpenPIC is now explicitely initialized (polarities, senses). Eliminated the implicit assumption on the presence of an ISA PIC. - UART and console driver now supports more than 1 port. The current maximum of 2 can easily be extended by enlarging a table (it would even be easier if the ISR API was not broken by design). - fixed polled_io.c so it correctly supports console on COM2 - fixed TLB invalidation code (start.S). - exception handler prints a stack backtrace. - added BSP_pciFindDevice() to scan the pci bus for a particular vendor/device/instance. 2001-05-09 Joel Sherrill * startup/linkcmds: In support of gcc 3.1, added one of more of the sections .jcr, .rodata*, .data.*, .gnu.linkonce.s2.*, .gnu.linkonce.sb2.*, and .gnu.linkonce.s.*. Spacing corrections and direction of segments to memory regions may also have been addressed. This was a sweep across all BSPs. 2002-04-18 Ralf Corsepius * bootloader/exception.S: Reflect changes to . * bootloader/head.S: Ditto. * bootloader/misc.c: Ditto. * console/polled_io.c: Ditto. * irq/irq.c: Ditto. * irq/irq_asm.S: Ditto. * irq/irq_init.c: Include . * start/start.S: Reflect changes to . * vectors/vectors.S: Ditto. 2002-04-16 Ralf Corsepius * startup/bspstart.c: Include . 2001-04-08 Joel Sherrill * startup/linkcmds: Per PR170, PR171, and PR172 add .eh_frame 2002-04-02 Ralf Corsepius * residual/residual.c: Include . * vectors/vectors_init.c: Include for printk. * bootloader/mm.c: Ditto. * bootloader/pci.c: Ditto. * console/console.c: Ditto. * openpic/openpic.c: Ditto. 2002-03-27 Ralf Corsepius * bootloader/Makefile.am: Remove AUTOMAKE_OPTIONS. * Makefile.am: Remove AUTOMAKE_OPTIONS. * clock/Makefile.am: Remove AUTOMAKE_OPTIONS. * console/Makefile.am: Remove AUTOMAKE_OPTIONS. * include/Makefile.am: Remove AUTOMAKE_OPTIONS. * irq/Makefile.am: Remove AUTOMAKE_OPTIONS. * motorola/Makefile.am: Remove AUTOMAKE_OPTIONS. * openpic/Makefile.am: Remove AUTOMAKE_OPTIONS. * pci/Makefile.am: Remove AUTOMAKE_OPTIONS. * residual/Makefile.am: Remove AUTOMAKE_OPTIONS. * start/Makefile.am: Remove AUTOMAKE_OPTIONS. * startup/Makefile.am: Remove AUTOMAKE_OPTIONS. * vectors/Makefile.am: Remove AUTOMAKE_OPTIONS. 2001-11-28 Ralf Corsepius * include/Makefile.am: Use _HEADER instead of H_FILES. * irq/Makefile.am: Ditto. * openpic/Makefile.am: Ditto. * include/bsp.h: Include . 2001-10-25 Joel Sherrill * startup/linkcmds: Added _init and _fini. 2001-10-12 Joel Sherrill * clock/p_clock.c, startup/bspstart.c: Fixed typo. 2001-09-27 Ralf Corsepius * console/Makefile.am: Use 'PREINSTALL_FILES ='. * residual/Makefile.am: Use 'PREINSTALL_FILES ='. * irq/Makefile.am: Use 'PREINSTALL_FILES ='. * motorola/Makefile.am: Use 'PREINSTALL_FILES ='. * vectors/Makefile.am: Use 'PREINSTALL_FILES ='. * pci/Makefile.am: Use 'PREINSTALL_FILES ='. * openpic/Makefile.am: Use 'PREINSTALL_FILES ='. 2001-05-14 Tom Armistead * start/start.S: Increased BAT0 mapping of RAM from 64 meg to 256 meg to allow operation on boards with larger RAM sizes. * vectors/vectors_init.c: Modified to call 'generic' powerpc vector function (mpc60x_vector_is_valid) instead of MPC750 specific function to allow operation on boards with CPUs other than the MPC750. 2001-03-30 Eric Valette * Makefile.am, console/consoleIo.h, include/bsp.h: These modifications are part of the conversion of the mpc8xx CPU to the "new exception processing model." 2000-11-01 Joel Sherrill * startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h, and libcsupport.h moved from libc to lib/include/rtems and now must be referenced as . Header file order was cleaned up while doing this. 2000-09-29 Charles-Antoine Gauthier * startup/linkcmds: Added lines so DWARF debug information would be available. Otherwise gdb complains that the offsets for the debug info are incorrect and doesn't load the files. 2000-09-05 Joel Sherrill * start/start.S: Include proper files to compile. 2000-08-10 Joel Sherrill * ChangeLog: New file.