# # $Id$ # make/README This file describes the layout and conventions of the make tree used in the RTEMS software project and others. All of these "make" trees are substantially similar; however this file documents the current state of the rtems Makefile tree. This make tree was developed originally to simplify porting projects between various os's. The primary goals are: . simple *and* customizable individual makefiles . use widely available GNU make. There is no pre-processing or automatic generation of Makefiles. . Same makefiles work on *many* host os's due to portability of GNU make and the host os config files. . Support for different compilers and operating systems on a per-user basis. Using the same sources (including Makefiles) one developer can develop and test under SVR4, another under 4.x, another under HPUX. . Builtin support for compiling "variants" such as debug, profile, and tcov versions. These variants can be built recursively. . Control of system dependencies. "hidden" dependencies on environment variables (such as PATH) have been removed whenever possible. No matter what your PATH variable is set to, you should get the same thing when you 'make' as everyone else on the project. This description attempts to cover all aspects of the Makefile tree. Most of what is described here is maintained automatically by the configuration files. The example makefiles in make/Templates should be used as a starting point for new directories. There are 2 main types of Makefile: directory and leaf. Directory Makefiles ------------------- A Makefile in a source directory with sub-directories is called a "directory" Makefile. Directory Makefile's are simply responsible for acting as "middle-men" and recursing into their sub-directories and propagating the make. For example, directory src/bin will contain only a Makefile and sub-directories. No actual source code will reside in the directory. The following commands: $ cd src/bin $ make all would descend into all the subdirectories of 'src/bin' and recursively perform a 'make all'. A 'make debug' will recurse thru sub-directories as a debug build. A template directory Makefile which should work in almost all cases is in make/Templates/Makefile.dir Leaf Makefiles -------------- Source directories that contain source code for libraries or programs use a "leaf" Makefile. These makefiles contain the rules necessary to build programs (or libraries). A template leaf Makefile is in Templates/Makefile.leaf . A template leaf Makefile for building libraries is in Templates/Makefile.lib . NOTE: To simplify nested makefile's and source maintenance, we disallow combining source and directories (that make(1) would be expected to recurse into) in one source directory. Ie., a directory in the source tree may contain EITHER source files OR recursive sub directories, but NOT both. Variants (where objects go) --------------------------- All binary targets are placed in a sub-directory whose name is (for example): o-force386/ -- binaries (no debug, no profile) o-force386-debug/ -- debug binaries o-force386-profile/ -- profiling binaries Using the template Makefiles, this will all happen automatically. Within a Makefile, the ${ARCH} variable is set to o-force386, o-force386-debug, etc., as appropriate. Typing 'make' will place objects in o-force386. 'make debug' will place objects in o-force386-debug. 'make profile' will place objects in o-force386-profile. NOTE: For RTEMS work, the word 'force386' is the specified RTEMS_BSP (specified in the modules file) The debug and profile targets are equivalent to 'all' except that CFLAGS and/or LDFLAGS are modified as per the compiler config file for debug and profile support. Targets debug_install and profile_install are equivalent to 'make install' except that debug (or profile) variants are built and installed. The targets debug, profile, debug_install, profile_install, etc., can be invoked recursively at the directory make level. So from the top of a tree, one could install a debug version of everything under that point by: $ cd src/lib $ gmake debug_install When building a command that is linked with a generated library, the appropriate version of the library will be linked in. For example, the following fragments link the normal, debug, or profile version of "libmine.a" as appropriate: LDLIBS += $(LIBMINE) LIBMINE = ../libmine/${ARCH}/libmine.a ${ARCH}/pgm: $(LIBMINE) ${OBJS} $(LINK.c) -o $@ ${OBJS} $(LDLIBS) If we do 'gmake debug', then the library in ../libmine/sparc-debug/libmine.a will be linked in. If $(LIBMINE) might not exist (or might be out of date) at this point, we could add ${LIBMINE}: FORCEIT cd ../libmine; ${MAKE} ${VARIANT_VA} The above would generate the following command to build libmine.a: cd ../libmine; gmake debug The macro reference ${VARIANT_VA} converts ${ARCH} to the word 'debug' (in this example) and thus ensures the proper version of the library is built. Targets ------- All Makefile's support the following targets: all -- make "everything" install -- install "everything" The following targets are provided automatically by the included config files: clean -- delete all targets clobber -- 'clean' plus delete sccs'd files lint -- run lint or lint-like tool get -- "sccs get" all sources depend -- build a make dependency file "variant targets" -- special variants, see below All directory Makefiles automatically propagate all these targets. If you don't wish to support 'all' or 'install' in your source directory, you must leave the rules section empty, as the parent directory Makefile will attempt it on recursive make's. Configuration ------------- All the real work described here happens in file(s) included from your Makefile. All Makefiles include a customization file which is used to select compiler and host operating system. The environment variable RTEMS_CUSTOM must point to this file; eg: /.../make/custom/force386.cfg All leaf Makefile's also include either 'make/leaf.cfg' (or 'make/lib.cfg' for building libraries). These config files provide default rules and set up the command macros as appropriate. All directory Makefiles include 'make/directory.cfg'. directory.cfg provides all the rules for recursing through sub directories. The Makefile templates already perform these include's. 'make/leaf.cfg' (or directory.cfg) in turn includes: a file specifying general purpose rules appropriate for both leaf and directory makefiles. ( make/main.cfg ) personality modules specified by the customization file for: compiler ( make/compilers/??.cfg ) operating system ( make/os/??.cfg ) private customization files --------------------------- [ $(RTEMS_CUSTOM) ] Your own private configuration file. Specifies which of the above files you want to include. Example: custom/force386.cfg CONFIG.$(HOST_ARCH).OS = $(RTEMS_ROOT)/make/os/HPUX-9.0.cfg # HOST Compiler config file # You may also want to specify where the compiler resides here. CC_$(HOST_ARCH)_DIR=/usr/local CONFIG.$(HOST_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc.cfg ## Target compiler config file, if any CC_$(TARGET_ARCH)_DIR=$(RTEMS_GNUTOOLS) CONFIG.$(TARGET_ARCH).CC = $(RTEMS_ROOT)/make/compilers/gcc-force386.cfg generic rules file ------------------ [ make/main.cfg ] included by leaf.cfg or directory.cfg. This file contains some standard rules and variable assignments that all Makefiles need. It also includes the FORCEIT: pseudo target. OS config file for host machine ------------------------------- [ make/os/OS-NAME.cfg ] included by main.cfg Figures out the target architecture and specifies command names for the OS tools including RCS/CVS (but NOT for the compiler tools). Compiler configuration for the target ------------------------------------- [ compilers/COMPILER-NAME.cfg ] included by leaf.cfg Specifies the names of tools for compiling programs. Names in here should be fully qualified, and NOT depend on $PATH. Also specifies compiler flags to be used to generate optimized, debugging and profile versions, as well as rules to compile assembly language and make makefile dependencies. Configuration Variables ----------------------- Variables you have to set in the environment or in your Makefile. Note: the rtems module files set RTEMS_ROOT and RTEMS_CUSTOM for you. Environment Variables --------------------- RTEMS_BSP -- name of your 'bsp' eg: force386 RTEMS_ROOT -- The root of your source tree. All other file names are derived from this. [ eg: % setenv RTEMS_ROOT $HOME/work/rtems ] RTEMS_CUSTOM -- name of your config files in make/custom Example: $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg RTEMS_GNUTOOLS -- root of the gcc tools for the target The value RTEMS_ROOT is used in the custom files to generate the make(1) variables: PROJECT_ROOT PROJECT_RELEASE PROJECT_TOOLS etc., which are used within the make config files themselves. (The files in make/*.cfg try to avoid use of word RTEMS so they can be more easily shared by other projects) Preset variables ---------------- Aside from command names set by the os and compiler config files, a number of MAKE variables are automatically set and maintained by the config files. CONFIG.$(HOST_ARCH).OS -- full path of OS config file, set by custom config file. CONFIG.$(HOST_ARCH).CC -- full path of C compilation config file, set by custom config file. PROJECT_RELEASE -- release/install directory [ $(PROJECT_ROOT) ] PROJECT_BIN -- directory for installed binaries [ $(PROJECT_ROOT)/bin ] PROJECT_TOOLS -- directory for build environment commands [ eg: $(PROJECT_ROOT)/build-tools ] TARCH -- ${TARGET_ARCH} [ eg: o-forc386 ] obsolete and should not be referenced ARCH -- target sub-directory for object code [ eg: o-force386 or o-force386-debug ] HOST_ARCH -- host machine architecture name [ eg: sun4, sparc on SVR4 ] VARIANTS -- full list of all possible values for $(ARCH); used mainly for 'make clean' [ eg: "o-force386 o-force386-debug o-force386-profile" ] VARIANT_VA -- Variant name. Normally "", but for 'make debug' it is "debug", for 'make profile', "profile, etc. see make/leaf.cfg for more info. Preset compilation variables ---------------------------- This is a list of some of the compilation variables. Refer to the compiler config files for the complete list. CFLAGS_OPTIMIZE_V -- value of optimize flag for compiler [ eg: -O ] CFLAGS_DEBUG_V -- value of debug flag for compiler [ eg: -g ] CFLAGS_PROFILE_V -- compiler profile flags [ eg: -pg ] CFLAGS_DEBUG_OPTIMIZE_V -- optimize flag if compiling for debug [ eg: "" ] CFLAGS_DEBUG CFLAGS_PROFILE CFLAGS_OPTIMIZE -- current values for each depending on make variant. LDFLAGS_STATIC_LIBRARIES_V -- ld option for static libraries -Bstatic or -dy (svr4) LDFLAGS_SHARED_LIBRARIES_V -- ld option for dynamic libraries -Bdynamic or -dn (svr4) LIB_SOCKET -- ld(1) -l option(s) to provide socket support. LIB_MATH -- ld(1) -l option(s) to provide math library. Makefile Variables ------------------ The following variables may be set in a typical Makefile. C_PIECES -- File names of your .c files without '.c' suffix. [ eg: C_PIECES=main funcs stuff ] CC_PIECES -- ditto, except for .cc files S_PIECES -- ditto, except for .S files. LIB -- target library name in leaf library makefiles. [ eg: LIB=${ARCH}/libmine.a ] H_FILES -- your .h files in this directory. [ eg: H_FILES=stuff.h extra.h ] DEFINES -- cc -D items. Included in CPPFLAGS. leaf Makefiles. [ eg: DEFINES += -DUNIX ] CPPFLAGS -- -I include directories. leaf Makefiles. [ eg: CPPFLAGS += -I../include ] YFLAGS -- Yacc flags. leaf Makefiles. [ eg: YFLAGS += -v ] LD_PATHS -- arguments to -L for ld. Will be prefixed with '-L' or '-L ' as appropriate and included in LDFLAGS. LDFLAGS -- -L arguments to ld; more may be ADDed. LD_LIBS -- libraries to be linked in. [ eg: LDLIBS += ../libfoo/${ARCH}/libfoo.a ] XCFLAGS -- "extra" CFLAGS for special needs. Pre-pended to CFLAGS. Not set or used by Makefiles. Can be set on command line to pass extra flags to the compiler. XCPPFLAGS -- ditto for CPPFLAGS Can be set on command line to pass extra flags to the preprocessor. XCCPPFLAGS -- same as XCPPFLAGS for C++. XCCFLAGS -- same as XCFLAGS for C++. SUB_DIRS -- list of sub directories for make recursion. directory Makefiles only. [ eg: SUB_DIRS=cpu bsp ] CLEAN_ADDITIONS -- list of files or directories that should be deleted by 'make clean' [ eg: CLEAN_ADDITIONS += y.tab.c ] See 'leaf.cfg' for the 'clean:' rule and its default deletions. CLOBBER_ADDITIONS -- list of files or directories that should be deleted by 'make clobber' Since 'make clobber' includes 'make clean', you don't need to duplicate items in both. TARGET_ARCH -- target architecture (eg: o-force386) leaf makefiles only. Should be specified before 'include leaf.cfg'. Only needs to be specified if your target is different from output of `arch`. Command names ------------- The following commands should only be called as make variables: MAKE,INSTALL,SHELL ECHO,CAT,RM,CP,MV,LN,MKDIR,CHMOD ED,SED CC,CPP,AS,AR,LD,NM,SIZE,RANLIB,MKLIB, YACC,LEX,LINT,CTAGS,ETAGS Special Directory Makefile Targets ---------------------------------- all_WRAPUP clean_WRAPUP install_WRAPUP clean_WRAPUP clobber_WRAPUP depend_WRAPUP -- Specify additional commands for recursive (directory level) targets. This is handy in certain cases where you need to do bit of work *after* a recursive make. make/Templates -------------- This directory contains Makefile and source file templates that should help in creating or converting makefiles. Makefile.leaf Template leaf Makefiles. Makefile.lib Template leaf library Makefiles. Makefile.dir Template "directory" makefile.