/* * This file contains GNU linker directives for a generic MC68360 board. * * Saskatchewan Accelerator Laboratory * University of Saskatchewan * Saskatoon, Saskatchewan, CANADA * eric@skatter.usask.ca * * $Id$ */ /* * Declare on-board memory */ MEMORY { ram : ORIGIN = 0x00000000, LENGTH = 4M rom : ORIGIN = 0xFF000000, LENGTH = 1M dpram : ORIGIN = 0xFE000000, LENGTH = 8k } /* * Declare some sizes * XXX: The assignment of ". += XyzSize;" fails in older gld's if the * number used there is not constant. If this happens to you, edit * the lines marked below to use a constant value. */ HeapSize = DEFINED(HeapSize) ? HeapSize : 0x10000; StackSize = DEFINED(StackSize) ? StackSize : 0x1000; /* * Declare low-order three octets of Ethernet address */ ETHERNET_ADDRESS = DEFINED(ETHERNET_ADDRESS) ? ETHERNET_ADDRESS : 0xDEAD12; /* * Load objects */ SECTIONS { /* * Boot PROM */ rom : { _RomBase = .; __RomBase = .; } >rom /* * Dynamic RAM */ ram : { _RamBase = .; __RamBase = .; } >ram /* * Text, data and bss segments */ .text : { CREATE_OBJECT_SYMBOLS *(.text) . = ALIGN (16); etext = .; _etext = .; } >ram .data : { copy_start = .; *(.data) . = ALIGN (16); _edata = .; copy_end = .; } >ram .bss : { M68Kvec = .; _M68Kvec = .; . += (256 * 4); clear_start = .; *(.bss) *(COMMON) . = ALIGN (16); _end = .; _HeapStart = .; __HeapStart = .; . += HeapSize; /* XXX -- Old gld can't handle this */ . += StackSize; /* XXX -- Old gld can't handle this */ /* . += 0x10000; */ /* HeapSize for old gld */ /* . += 0x1000; */ /* StackSize for old gld */ . = ALIGN (16); stack_init = .; clear_end = .; _WorkspaceBase = .; __WorkspaceBase = .; } >ram /* * On-chip memory/peripherals */ dpram : { m360 = .; _m360 = .; . += (8 * 1024); } >dpram }