#
#  README
#

BSP NAME:           gen5200
BOARD:              various boards based on MPC5200 Controller:
                    MicroSys PM520 with Carrier board CR825
BUS:                N/A
CPU FAMILY:         ppc
CPU:                PowerPC MPC5200
COPROCESSORS:       Hardware FPU 
MODE:               32 bit mode, I and D cache enabled
DEBUG MONITOR:      None

PERIPHERALS
===========
TIMERS:             GPT
SERIAL PORTS:       3 PSCs                     
                    2 CAN IFs
                    1 I2C IF
REAL-TIME CLOCK:    PCF8563
DMA:                for Ethernet and CompactFlash
VIDEO:              none
SCSI:               none
IDE:                1 CompactFlash Slot supported
NETWORKING:         1 FEC Fast Ethernet

DRIVER INFORMATION
==================
CLOCK DRIVER:       using one GPT
IOSUPP DRIVER:      none
SHMSUPP:            none
TIMER DRIVER:       Timebase register (lower 32 bits only)

STDIO
=====
PORT:               PSC1
ELECTRICAL:         RS-232
BAUD:               9600
BITS PER CHARACTER: 8
PARITY:             None
STOP BITS:          1

NOTES
=====
On-chip resources:
	PSC1		/dev/console /dev/tty00
	PSC2		/dev/tty01
	PSC3		/dev/tty02


Board description
-----------------

Clock rate:	external clock: 33MHz 
Bus width:	32 bit Flash, 32 bit SDRAM
FLASH:		8MByte
RAM:		64MByte SDRAM 


Debugging/ Code loading:
------------------------

Tested using the Lauterbach TRACE32 ICD debugger.