# # $Id$ # Description: efi68k ============ CPU: MC68332 @16MHz RAM: 256k max. (supports several configurations) ROM: 512k (supports several configurations) This general purpose controller has been designed by a group of Internet subscribes to the mailing list "efi332" (an offshoot of the "diy_efi" mailing list). Although efi332 was initially designed for automotive research, it is a fairly generalized embedded controller when used without the companion EFI I/O board. It is patterned much after the the Motorola BCC but cost on the order of $250US. A 4x3 inch (approx.) printed circuit board is available (about $14US). For complete information see http://efi332.eng.ohio-state.edu TODO: ===== - integrate the interrupt driven stdin/stdout into RTEMS to (a) reduce the interrupt priority and (2) to prevent it from blocking. (high priority) - add a timer driver for the tmtest set. - generate include/coverhd.c to perform the tmtest. - add separate interrupt stack (low priority... may never happen :). John S Gwynne Gwynne.1@osu.edu _______________________________________________________________________________ T h e O h i o - S t a t e U n i v e r s i t y ElectroScience Laboratory, 1320 Kinnear Road, Columbus, Ohio 43212, USA Telephone: (614) 292-7981 * Fax: (614) 292-7297 -------------------------------------------------------------------------------