# # $Id$ # # Author: Ralf Corsepius (corsepiu@faw.uni-ulm.de) # Adapted by: John Mills (jmills@tga.com) # Corrections: Radzislaw Galler (rgaller@et.put.poznan.pl) BSP NAME: generic SH2 (gensh2) BOARD: EVB7045F (note 2) BUS: n/a CPU FAMILY: Hitachi SH CPU: SH 7045F COPROCESSORS: none MODE: n/a DEBUG MONITOR: gdb PERIPHERALS =========== TIMERS: on-chip RESOLUTION: cf. Hitachi SH 704X Hardware Manual (Phi/16) SERIAL PORTS: on-chip (with 2 ports) REAL-TIME CLOCK: none DMA: not used VIDEO: none SCSI: none NETWORKING: none DRIVER INFORMATION ================== CLOCK DRIVER: on-chip timer IOSUPP DRIVER: default SHMSUPP: default TIMER DRIVER: on-chip timer TTY DRIVER: /dev/console STDIO ===== PORT: /dev/sci0 ELECTRICAL: SCI0 BAUD: 9600 BITS PER CHARACTER: 8 PARITY: NONE STOP BITS: 1 NOTES ===== (1) The present 'hw_init.c' file provides 'early_hw_init'(void) which is normally called from 'start.S' to provide such minimal HW setup as is conveniently written in 'C' and can make use of global symbols for 7045F processor elements. It also provides 'void bsp_hw_init (void)' normally called from 'bspstart.c', shortly before RTEMS itself is started. These are both minimal functions intended to support the RTEMS test suites. (2) See README.EVB7045F