Changeset fad3f79b in rtems for c


Ignore:
Timestamp:
Aug 31, 2018, 5:44:53 AM (14 months ago)
Author:
Sebastian Huber <sebastian.huber@…>
Branches:
master
Children:
3aad9d9b
Parents:
7b1a711
git-author:
Sebastian Huber <sebastian.huber@…> (08/31/18 05:44:53)
git-committer:
Sebastian Huber <sebastian.huber@…> (09/03/18 05:03:09)
Message:

bsps: BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN

Remove the BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN hack. The interrupt
stacks are now allocated by the linker.

Update #3459.

Location:
c/src/lib/libbsp/powerpc
Files:
3 edited

Legend:

Unmodified
Added
Removed
  • c/src/lib/libbsp/powerpc/gen83xx/configure.ac

    r7b1a711 rfad3f79b  
    1818RTEMS_BSPOPTS_SET_INSTRUCTION_CACHE_ENABLED([*],[1])
    1919RTEMS_BSPOPTS_HELP_INSTRUCTION_CACHE_ENABLED
    20 
    21 RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1])
    22 RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin])
    2320
    2421RTEMS_BSPOPTS_SET([MPC83XX_BOARD_MPC8313ERDB],[mpc8313erdb],[1])
  • c/src/lib/libbsp/powerpc/psim/configure.ac

    r7b1a711 rfad3f79b  
    4343and a little memory is saved.])
    4444
    45 RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1])
    46 RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin])
    47 
    4845AC_DEFINE(ppc603e, 1, [PowerPC model option])
    4946
  • c/src/lib/libbsp/powerpc/qoriq/configure.ac

    r7b1a711 rfad3f79b  
    100100RTEMS_BSPOPTS_HELP([QORIQ_UART_BRIDGE_1_ENABLE],[use 1 to enable UART 1 to Intercom bridge, otherwise use 0])
    101101
    102 RTEMS_BSPOPTS_SET([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[*],[1])
    103 RTEMS_BSPOPTS_HELP([BSP_INTERRUPT_STACK_AT_WORK_AREA_BEGIN],[indicate that the interrupt stack is at the work area begin])
    104 
    105102RTEMS_BSPOPTS_SET([QORIQ_INTERCOM_AREA_BEGIN],[*],[0x3000000])
    106103RTEMS_BSPOPTS_HELP([QORIQ_INTERCOM_AREA_BEGIN],[inter-processor communication area begin])
Note: See TracChangeset for help on using the changeset viewer.