Index: ntrib/crossrpms/patches/newlib-1.14.0-rtems-20061026.diff
===================================================================
--- contrib/crossrpms/patches/newlib-1.14.0-rtems-20061026.diff	(revision 2466600af1cdf42ac3bd1fe0ba44ab38adb621d7)
+++ 	(revision )
@@ -1,4138 +1,0 @@
-diff -uNr newlib-1.14.0.orig/newlib/configure.host newlib-1.14.0/newlib/configure.host
---- newlib-1.14.0.orig/newlib/configure.host	2005-12-12 12:25:07.000000000 +0100
-+++ newlib-1.14.0/newlib/configure.host	2006-09-09 06:34:24.000000000 +0200
-@@ -96,6 +96,9 @@
-   avr*)
- 	newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED -mcall-prologues"
- 	;;
-+  bfin)
-+	machine_dir=bfin
-+	;;
-   cris | crisv32)
- 	machine_dir=cris
- 	;;
-diff -uNr newlib-1.14.0.orig/newlib/libc/include/machine/ieeefp.h newlib-1.14.0/newlib/libc/include/machine/ieeefp.h
---- newlib-1.14.0.orig/newlib/libc/include/machine/ieeefp.h	2005-12-13 23:57:31.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/include/machine/ieeefp.h	2006-09-09 06:34:24.000000000 +0200
-@@ -278,6 +278,10 @@
- #define __IEEE_LITTLE_ENDIAN
- #endif
- 
-+#ifdef BFIN
-+#define __IEEE_LITTLE_ENDIAN
-+#endif
-+
- #ifndef __IEEE_BIG_ENDIAN
- #ifndef __IEEE_LITTLE_ENDIAN
- #error Endianess not declared!!
-diff -uNr newlib-1.14.0.orig/newlib/libc/include/machine/setjmp.h newlib-1.14.0/newlib/libc/include/machine/setjmp.h
---- newlib-1.14.0.orig/newlib/libc/include/machine/setjmp.h	2005-12-13 23:57:31.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/include/machine/setjmp.h	2006-09-09 06:34:24.000000000 +0200
-@@ -23,7 +23,7 @@
- 
- /* necv70 was 9 as well. */
- 
--#ifdef __mc68000__
-+#if defined(__m68k__) || defined(__mc68000__)
- /*
-  * onsstack,sigmask,sp,pc,psl,d2-d7,a2-a6,
-  * fp2-fp7	for 68881.
-diff -uNr newlib-1.14.0.orig/newlib/libc/include/sys/_types.h newlib-1.14.0/newlib/libc/include/sys/_types.h
---- newlib-1.14.0.orig/newlib/libc/include/sys/_types.h	2004-06-11 22:37:09.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/include/sys/_types.h	2006-09-09 06:34:24.000000000 +0200
-@@ -39,4 +39,7 @@
- /* Iconv descriptor type */
- typedef void *_iconv_t;
- 
-+typedef long * __intptr_t;
-+typedef unsigned long* __uintptr_t;
-+
- #endif	/* _SYS__TYPES_H */
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/arm/machine/endian.h newlib-1.14.0/newlib/libc/machine/arm/machine/endian.h
---- newlib-1.14.0.orig/newlib/libc/machine/arm/machine/endian.h	2004-05-07 22:29:24.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/machine/arm/machine/endian.h	1970-01-01 01:00:00.000000000 +0100
-@@ -1,12 +0,0 @@
--/* ARM configuration file */
--
--#ifndef _MACHINE_ENDIAN_H
--# define _MACHINE_ENDIAN_H
--
--#ifdef __ARMEB__
--#define BYTE_ORDER BIG_ENDIAN
--#else
--#define BYTE_ORDER LITTLE_ENDIAN
--#endif
--
--#endif
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/bfin/aclocal.m4 newlib-1.14.0/newlib/libc/machine/bfin/aclocal.m4
---- newlib-1.14.0.orig/newlib/libc/machine/bfin/aclocal.m4	1970-01-01 01:00:00.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/machine/bfin/aclocal.m4	2006-09-09 06:34:24.000000000 +0200
-@@ -0,0 +1,366 @@
-+dnl aclocal.m4 generated automatically by aclocal 1.4-p6
-+
-+dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-+dnl This file is free software; the Free Software Foundation
-+dnl gives unlimited permission to copy and/or distribute it,
-+dnl with or without modifications, as long as this notice is preserved.
-+
-+dnl This program is distributed in the hope that it will be useful,
-+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+dnl PARTICULAR PURPOSE.
-+
-+dnl This provides configure definitions used by all the newlib
-+dnl configure.in files.
-+
-+dnl Basic newlib configury.  This calls basic introductory stuff,
-+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST.  It also runs
-+dnl configure.host.  The only argument is the relative path to the top
-+dnl newlib directory.
-+
-+AC_DEFUN(NEWLIB_CONFIGURE,
-+[
-+dnl Default to --enable-multilib
-+AC_ARG_ENABLE(multilib,
-+[  --enable-multilib         build many library versions (default)],
-+[case "${enableval}" in
-+  yes) multilib=yes ;;
-+  no)  multilib=no ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
-+ esac], [multilib=yes])dnl
-+
-+dnl Support --enable-target-optspace
-+AC_ARG_ENABLE(target-optspace,
-+[  --enable-target-optspace  optimize for space],
-+[case "${enableval}" in
-+  yes) target_optspace=yes ;;
-+  no)  target_optspace=no ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
-+ esac], [target_optspace=])dnl
-+
-+dnl Support --enable-malloc-debugging - currently only supported for Cygwin
-+AC_ARG_ENABLE(malloc-debugging,
-+[  --enable-malloc-debugging indicate malloc debugging requested],
-+[case "${enableval}" in
-+  yes) malloc_debugging=yes ;;
-+  no)  malloc_debugging=no ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
-+ esac], [malloc_debugging=])dnl
-+
-+dnl Support --enable-newlib-multithread
-+AC_ARG_ENABLE(newlib-multithread,
-+[  --enable-newlib-multithread        enable support for multiple threads],
-+[case "${enableval}" in
-+  yes) newlib_multithread=yes ;;
-+  no)  newlib_multithread=no ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-multithread option) ;;
-+ esac], [newlib_multithread=yes])dnl
-+
-+dnl Support --enable-newlib-iconv
-+AC_ARG_ENABLE(newlib-iconv,
-+[  --enable-newlib-iconv     enable iconv library support],
-+[if test "${newlib_iconv+set}" != set; then
-+   case "${enableval}" in
-+     yes) newlib_iconv=yes ;;
-+     no)  newlib_iconv=no ;;
-+     *)   AC_MSG_ERROR(bad value ${enableval} for newlib-iconv option) ;;
-+   esac
-+ fi], [newlib_iconv=${newlib_iconv}])dnl
-+
-+dnl Support --enable-newlib-elix-level
-+AC_ARG_ENABLE(newlib-elix-level,
-+[  --enable-newlib-elix-level         supply desired elix library level (1-4)],
-+[case "${enableval}" in
-+  0)   newlib_elix_level=0 ;;
-+  1)   newlib_elix_level=1 ;;
-+  2)   newlib_elix_level=2 ;;
-+  3)   newlib_elix_level=3 ;;
-+  4)   newlib_elix_level=4 ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-elix-level option) ;;
-+ esac], [newlib_elix_level=0])dnl
-+
-+dnl Support --disable-newlib-io-float
-+AC_ARG_ENABLE(newlib-io-float,
-+[  --disable-newlib-io-float disable printf/scanf family float support],
-+[case "${enableval}" in
-+  yes) newlib_io_float=yes ;;
-+  no)  newlib_io_float=no ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-io-float option) ;;
-+ esac], [newlib_io_float=yes])dnl
-+
-+dnl Support --disable-newlib-supplied-syscalls
-+AC_ARG_ENABLE(newlib-supplied-syscalls,
-+[  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls],
-+[case "${enableval}" in
-+  yes) newlib_may_supply_syscalls=yes ;;
-+  no)  newlib_may_supply_syscalls=no ;;
-+  *)   AC_MSG_ERROR(bad value ${enableval} for newlib-supplied-syscalls option) ;;
-+ esac], [newlib_may_supply_syscalls=yes])dnl
-+
-+AM_CONDITIONAL(MAY_SUPPLY_SYSCALLS, test x[$]{newlib_may_supply_syscalls} = xyes)
-+
-+dnl We may get other options which we don't document:
-+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-+
-+test -z "[$]{with_target_subdir}" && with_target_subdir=.
-+
-+if test "[$]{srcdir}" = "."; then
-+  if test "[$]{with_target_subdir}" != "."; then
-+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
-+  else
-+    newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
-+  fi
-+else
-+  newlib_basedir="[$]{srcdir}/$1"
-+fi
-+AC_SUBST(newlib_basedir)
-+
-+AC_CANONICAL_SYSTEM
-+
-+AM_INIT_AUTOMAKE(newlib, 1.14.0)
-+
-+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-+# are probably using a cross compiler, which will not be able to fully
-+# link an executable.  This should really be fixed in autoconf
-+# itself.
-+
-+AC_DEFUN(LIB_AC_PROG_CC,
-+[AC_BEFORE([$0], [AC_PROG_CPP])dnl
-+AC_CHECK_PROG(CC, gcc, gcc)
-+if test -z "$CC"; then
-+  AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
-+  test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
-+fi
-+
-+AC_PROG_CC_GNU
-+
-+if test $ac_cv_prog_gcc = yes; then
-+  GCC=yes
-+dnl Check whether -g works, even if CFLAGS is set, in case the package
-+dnl plays around with CFLAGS (such as to build both debugging and
-+dnl normal versions of a library), tasteless as that idea is.
-+  ac_test_CFLAGS="${CFLAGS+set}"
-+  ac_save_CFLAGS="$CFLAGS"
-+  CFLAGS=
-+  AC_PROG_CC_G
-+  if test "$ac_test_CFLAGS" = set; then
-+    CFLAGS="$ac_save_CFLAGS"
-+  elif test $ac_cv_prog_cc_g = yes; then
-+    CFLAGS="-g -O2"
-+  else
-+    CFLAGS="-O2"
-+  fi
-+else
-+  GCC=
-+  test "${CFLAGS+set}" = set || CFLAGS="-g"
-+fi
-+])
-+
-+LIB_AC_PROG_CC
-+
-+AC_CHECK_TOOL(AS, as)
-+AC_CHECK_TOOL(AR, ar)
-+AC_CHECK_TOOL(RANLIB, ranlib, :)
-+
-+AC_PROG_INSTALL
-+
-+AM_MAINTAINER_MODE
-+
-+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-+# at least currently, we never actually build a program, so we never
-+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-+# fails, because we are probably configuring with a cross compiler
-+# which can't create executables.  So we include AC_EXEEXT to keep
-+# automake happy, but we don't execute it, since we don't care about
-+# the result.
-+if false; then
-+  AC_EXEEXT
-+fi
-+
-+. [$]{newlib_basedir}/configure.host
-+
-+newlib_cflags="[$]{newlib_cflags} -fno-builtin"
-+
-+NEWLIB_CFLAGS=${newlib_cflags}
-+AC_SUBST(NEWLIB_CFLAGS)
-+
-+LDFLAGS=${ldflags}
-+AC_SUBST(LDFLAGS)
-+
-+AM_CONDITIONAL(ELIX_LEVEL_0, test x[$]{newlib_elix_level} = x0)
-+AM_CONDITIONAL(ELIX_LEVEL_1, test x[$]{newlib_elix_level} = x1)
-+AM_CONDITIONAL(ELIX_LEVEL_2, test x[$]{newlib_elix_level} = x2)
-+AM_CONDITIONAL(ELIX_LEVEL_3, test x[$]{newlib_elix_level} = x3)
-+AM_CONDITIONAL(ELIX_LEVEL_4, test x[$]{newlib_elix_level} = x4)
-+
-+AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes)
-+
-+# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-+# use oext, which is set in configure.host based on the target platform.
-+OBJEXT=${oext}
-+
-+AC_SUBST(OBJEXT)
-+AC_SUBST(oext)
-+AC_SUBST(aext)
-+
-+AC_SUBST(libm_machine_dir)
-+AC_SUBST(machine_dir)
-+AC_SUBST(sys_dir)
-+])
-+
-+# Do all the work for Automake.  This macro actually does too much --
-+# some checks are only needed if your package does certain things.
-+# But this isn't really a big deal.
-+
-+# serial 1
-+
-+dnl Usage:
-+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-+
-+AC_DEFUN([AM_INIT_AUTOMAKE],
-+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-+AC_REQUIRE([AC_PROG_INSTALL])
-+PACKAGE=[$1]
-+AC_SUBST(PACKAGE)
-+VERSION=[$2]
-+AC_SUBST(VERSION)
-+dnl test to see if srcdir already configured
-+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-+fi
-+ifelse([$3],,
-+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-+AC_REQUIRE([AM_SANITY_CHECK])
-+AC_REQUIRE([AC_ARG_PROGRAM])
-+dnl FIXME This is truly gross.
-+missing_dir=`cd $ac_aux_dir && pwd`
-+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
-+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
-+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-+AC_REQUIRE([AC_PROG_MAKE_SET])])
-+
-+# Copyright 2002  Free Software Foundation, Inc.
-+
-+# This program is free software; you can redistribute it and/or modify
-+# it under the terms of the GNU General Public License as published by
-+# the Free Software Foundation; either version 2, or (at your option)
-+# any later version.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+# GNU General Public License for more details.
-+
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-+
-+# AM_AUTOMAKE_VERSION(VERSION)
-+# ----------------------------
-+# Automake X.Y traces this macro to ensure aclocal.m4 has been
-+# generated from the m4 files accompanying Automake X.Y.
-+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
-+
-+# AM_SET_CURRENT_AUTOMAKE_VERSION
-+# -------------------------------
-+# Call AM_AUTOMAKE_VERSION so it can be traced.
-+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-+	 [AM_AUTOMAKE_VERSION([1.4-p6])])
-+
-+#
-+# Check to make sure that the build environment is sane.
-+#
-+
-+AC_DEFUN([AM_SANITY_CHECK],
-+[AC_MSG_CHECKING([whether build environment is sane])
-+# Just in case
-+sleep 1
-+echo timestamp > conftestfile
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments.  Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-+   if test "[$]*" = "X"; then
-+      # -L didn't work.
-+      set X `ls -t $srcdir/configure conftestfile`
-+   fi
-+   if test "[$]*" != "X $srcdir/configure conftestfile" \
-+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-+
-+      # If neither matched, then we have a broken ls.  This can happen
-+      # if, for instance, CONFIG_SHELL is bash and it inherits a
-+      # broken ls alias from the environment.  This has actually
-+      # happened.  Such a system could not be considered "sane".
-+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment])
-+   fi
-+
-+   test "[$]2" = conftestfile
-+   )
-+then
-+   # Ok.
-+   :
-+else
-+   AC_MSG_ERROR([newly created file is older than distributed files!
-+Check your system clock])
-+fi
-+rm -f conftest*
-+AC_MSG_RESULT(yes)])
-+
-+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-+dnl The program must properly implement --version.
-+AC_DEFUN([AM_MISSING_PROG],
-+[AC_MSG_CHECKING(for working $2)
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf.  Sigh.
-+if ($2 --version) < /dev/null > /dev/null 2>&1; then
-+   $1=$2
-+   AC_MSG_RESULT(found)
-+else
-+   $1="$3/missing $2"
-+   AC_MSG_RESULT(missing)
-+fi
-+AC_SUBST($1)])
-+
-+# Define a conditional.
-+
-+AC_DEFUN([AM_CONDITIONAL],
-+[AC_SUBST($1_TRUE)
-+AC_SUBST($1_FALSE)
-+if $2; then
-+  $1_TRUE=
-+  $1_FALSE='#'
-+else
-+  $1_TRUE='#'
-+  $1_FALSE=
-+fi])
-+
-+# Add --enable-maintainer-mode option to configure.
-+# From Jim Meyering
-+
-+# serial 1
-+
-+AC_DEFUN([AM_MAINTAINER_MODE],
-+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-+  dnl maintainer-mode is disabled by default
-+  AC_ARG_ENABLE(maintainer-mode,
-+[  --enable-maintainer-mode enable make rules and dependencies not useful
-+                          (and sometimes confusing) to the casual installer],
-+      USE_MAINTAINER_MODE=$enableval,
-+      USE_MAINTAINER_MODE=no)
-+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
-+  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
-+  MAINT=$MAINTAINER_MODE_TRUE
-+  AC_SUBST(MAINT)dnl
-+]
-+)
-+
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/bfin/configure newlib-1.14.0/newlib/libc/machine/bfin/configure
---- newlib-1.14.0.orig/newlib/libc/machine/bfin/configure	1970-01-01 01:00:00.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/machine/bfin/configure	2006-09-09 06:34:24.000000000 +0200
-@@ -0,0 +1,1880 @@
-+#! /bin/sh
-+
-+# Guess values for system-dependent variables and create Makefiles.
-+# Generated automatically using autoconf version 2.13 
-+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-+#
-+# This configure script is free software; the Free Software Foundation
-+# gives unlimited permission to copy, distribute and modify it.
-+
-+# Defaults:
-+ac_help=
-+ac_default_prefix=/usr/local
-+# Any additions from configure.in:
-+ac_help="$ac_help
-+  --enable-multilib         build many library versions (default)"
-+ac_help="$ac_help
-+  --enable-target-optspace  optimize for space"
-+ac_help="$ac_help
-+  --enable-malloc-debugging indicate malloc debugging requested"
-+ac_help="$ac_help
-+  --enable-newlib-multithread        enable support for multiple threads"
-+ac_help="$ac_help
-+  --enable-newlib-iconv     enable iconv library support"
-+ac_help="$ac_help
-+  --enable-newlib-elix-level         supply desired elix library level (1-4)"
-+ac_help="$ac_help
-+  --disable-newlib-io-float disable printf/scanf family float support"
-+ac_help="$ac_help
-+  --disable-newlib-supplied-syscalls disable newlib from supplying syscalls"
-+ac_help="$ac_help
-+  --enable-maintainer-mode enable make rules and dependencies not useful
-+                          (and sometimes confusing) to the casual installer"
-+
-+# Initialize some variables set by options.
-+# The variables have the same names as the options, with
-+# dashes changed to underlines.
-+build=NONE
-+cache_file=./config.cache
-+exec_prefix=NONE
-+host=NONE
-+no_create=
-+nonopt=NONE
-+no_recursion=
-+prefix=NONE
-+program_prefix=NONE
-+program_suffix=NONE
-+program_transform_name=s,x,x,
-+silent=
-+site=
-+srcdir=
-+target=NONE
-+verbose=
-+x_includes=NONE
-+x_libraries=NONE
-+bindir='${exec_prefix}/bin'
-+sbindir='${exec_prefix}/sbin'
-+libexecdir='${exec_prefix}/libexec'
-+datadir='${prefix}/share'
-+sysconfdir='${prefix}/etc'
-+sharedstatedir='${prefix}/com'
-+localstatedir='${prefix}/var'
-+libdir='${exec_prefix}/lib'
-+includedir='${prefix}/include'
-+oldincludedir='/usr/include'
-+infodir='${prefix}/info'
-+mandir='${prefix}/man'
-+
-+# Initialize some other variables.
-+subdirs=
-+MFLAGS= MAKEFLAGS=
-+SHELL=${CONFIG_SHELL-/bin/sh}
-+# Maximum number of lines to put in a shell here document.
-+ac_max_here_lines=12
-+
-+ac_prev=
-+for ac_option
-+do
-+
-+  # If the previous option needs an argument, assign it.
-+  if test -n "$ac_prev"; then
-+    eval "$ac_prev=\$ac_option"
-+    ac_prev=
-+    continue
-+  fi
-+
-+  case "$ac_option" in
-+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-+  *) ac_optarg= ;;
-+  esac
-+
-+  # Accept the important Cygnus configure options, so we can diagnose typos.
-+
-+  case "$ac_option" in
-+
-+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-+    ac_prev=bindir ;;
-+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-+    bindir="$ac_optarg" ;;
-+
-+  -build | --build | --buil | --bui | --bu)
-+    ac_prev=build ;;
-+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-+    build="$ac_optarg" ;;
-+
-+  -cache-file | --cache-file | --cache-fil | --cache-fi \
-+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-+    ac_prev=cache_file ;;
-+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-+    cache_file="$ac_optarg" ;;
-+
-+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-+    ac_prev=datadir ;;
-+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-+  | --da=*)
-+    datadir="$ac_optarg" ;;
-+
-+  -disable-* | --disable-*)
-+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-+    # Reject names that are not valid shell variable names.
-+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-+    fi
-+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-+    eval "enable_${ac_feature}=no" ;;
-+
-+  -enable-* | --enable-*)
-+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-+    # Reject names that are not valid shell variable names.
-+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-+    fi
-+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-+    case "$ac_option" in
-+      *=*) ;;
-+      *) ac_optarg=yes ;;
-+    esac
-+    eval "enable_${ac_feature}='$ac_optarg'" ;;
-+
-+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-+  | --exec | --exe | --ex)
-+    ac_prev=exec_prefix ;;
-+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-+  | --exec=* | --exe=* | --ex=*)
-+    exec_prefix="$ac_optarg" ;;
-+
-+  -gas | --gas | --ga | --g)
-+    # Obsolete; use --with-gas.
-+    with_gas=yes ;;
-+
-+  -help | --help | --hel | --he)
-+    # Omit some internal or obsolete options to make the list less imposing.
-+    # This message is too long to be a string in the A/UX 3.1 sh.
-+    cat << EOF
-+Usage: configure [options] [host]
-+Options: [defaults in brackets after descriptions]
-+Configuration:
-+  --cache-file=FILE       cache test results in FILE
-+  --help                  print this message
-+  --no-create             do not create output files
-+  --quiet, --silent       do not print \`checking...' messages
-+  --version               print the version of autoconf that created configure
-+Directory and file names:
-+  --prefix=PREFIX         install architecture-independent files in PREFIX
-+                          [$ac_default_prefix]
-+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-+                          [same as prefix]
-+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-+  --datadir=DIR           read-only architecture-independent data in DIR
-+                          [PREFIX/share]
-+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-+                          [PREFIX/com]
-+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-+  --includedir=DIR        C header files in DIR [PREFIX/include]
-+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-+  --infodir=DIR           info documentation in DIR [PREFIX/info]
-+  --mandir=DIR            man documentation in DIR [PREFIX/man]
-+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-+  --program-prefix=PREFIX prepend PREFIX to installed program names
-+  --program-suffix=SUFFIX append SUFFIX to installed program names
-+  --program-transform-name=PROGRAM
-+                          run sed PROGRAM on installed program names
-+EOF
-+    cat << EOF
-+Host type:
-+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-+  --host=HOST             configure for HOST [guessed]
-+  --target=TARGET         configure for TARGET [TARGET=HOST]
-+Features and packages:
-+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-+  --x-includes=DIR        X include files are in DIR
-+  --x-libraries=DIR       X library files are in DIR
-+EOF
-+    if test -n "$ac_help"; then
-+      echo "--enable and --with options recognized:$ac_help"
-+    fi
-+    exit 0 ;;
-+
-+  -host | --host | --hos | --ho)
-+    ac_prev=host ;;
-+  -host=* | --host=* | --hos=* | --ho=*)
-+    host="$ac_optarg" ;;
-+
-+  -includedir | --includedir | --includedi | --included | --include \
-+  | --includ | --inclu | --incl | --inc)
-+    ac_prev=includedir ;;
-+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-+  | --includ=* | --inclu=* | --incl=* | --inc=*)
-+    includedir="$ac_optarg" ;;
-+
-+  -infodir | --infodir | --infodi | --infod | --info | --inf)
-+    ac_prev=infodir ;;
-+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-+    infodir="$ac_optarg" ;;
-+
-+  -libdir | --libdir | --libdi | --libd)
-+    ac_prev=libdir ;;
-+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-+    libdir="$ac_optarg" ;;
-+
-+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-+  | --libexe | --libex | --libe)
-+    ac_prev=libexecdir ;;
-+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-+  | --libexe=* | --libex=* | --libe=*)
-+    libexecdir="$ac_optarg" ;;
-+
-+  -localstatedir | --localstatedir | --localstatedi | --localstated \
-+  | --localstate | --localstat | --localsta | --localst \
-+  | --locals | --local | --loca | --loc | --lo)
-+    ac_prev=localstatedir ;;
-+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-+    localstatedir="$ac_optarg" ;;
-+
-+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-+    ac_prev=mandir ;;
-+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-+    mandir="$ac_optarg" ;;
-+
-+  -nfp | --nfp | --nf)
-+    # Obsolete; use --without-fp.
-+    with_fp=no ;;
-+
-+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-+  | --no-cr | --no-c)
-+    no_create=yes ;;
-+
-+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-+    no_recursion=yes ;;
-+
-+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-+  | --oldin | --oldi | --old | --ol | --o)
-+    ac_prev=oldincludedir ;;
-+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-+    oldincludedir="$ac_optarg" ;;
-+
-+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-+    ac_prev=prefix ;;
-+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-+    prefix="$ac_optarg" ;;
-+
-+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-+  | --program-pre | --program-pr | --program-p)
-+    ac_prev=program_prefix ;;
-+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-+    program_prefix="$ac_optarg" ;;
-+
-+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-+  | --program-suf | --program-su | --program-s)
-+    ac_prev=program_suffix ;;
-+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-+    program_suffix="$ac_optarg" ;;
-+
-+  -program-transform-name | --program-transform-name \
-+  | --program-transform-nam | --program-transform-na \
-+  | --program-transform-n | --program-transform- \
-+  | --program-transform | --program-transfor \
-+  | --program-transfo | --program-transf \
-+  | --program-trans | --program-tran \
-+  | --progr-tra | --program-tr | --program-t)
-+    ac_prev=program_transform_name ;;
-+  -program-transform-name=* | --program-transform-name=* \
-+  | --program-transform-nam=* | --program-transform-na=* \
-+  | --program-transform-n=* | --program-transform-=* \
-+  | --program-transform=* | --program-transfor=* \
-+  | --program-transfo=* | --program-transf=* \
-+  | --program-trans=* | --program-tran=* \
-+  | --progr-tra=* | --program-tr=* | --program-t=*)
-+    program_transform_name="$ac_optarg" ;;
-+
-+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-+  | -silent | --silent | --silen | --sile | --sil)
-+    silent=yes ;;
-+
-+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-+    ac_prev=sbindir ;;
-+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-+  | --sbi=* | --sb=*)
-+    sbindir="$ac_optarg" ;;
-+
-+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-+  | --sharedst | --shareds | --shared | --share | --shar \
-+  | --sha | --sh)
-+    ac_prev=sharedstatedir ;;
-+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-+  | --sha=* | --sh=*)
-+    sharedstatedir="$ac_optarg" ;;
-+
-+  -site | --site | --sit)
-+    ac_prev=site ;;
-+  -site=* | --site=* | --sit=*)
-+    site="$ac_optarg" ;;
-+
-+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-+    ac_prev=srcdir ;;
-+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-+    srcdir="$ac_optarg" ;;
-+
-+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-+  | --syscon | --sysco | --sysc | --sys | --sy)
-+    ac_prev=sysconfdir ;;
-+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-+    sysconfdir="$ac_optarg" ;;
-+
-+  -target | --target | --targe | --targ | --tar | --ta | --t)
-+    ac_prev=target ;;
-+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-+    target="$ac_optarg" ;;
-+
-+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-+    verbose=yes ;;
-+
-+  -version | --version | --versio | --versi | --vers)
-+    echo "configure generated by autoconf version 2.13"
-+    exit 0 ;;
-+
-+  -with-* | --with-*)
-+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-+    # Reject names that are not valid shell variable names.
-+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-+    fi
-+    ac_package=`echo $ac_package| sed 's/-/_/g'`
-+    case "$ac_option" in
-+      *=*) ;;
-+      *) ac_optarg=yes ;;
-+    esac
-+    eval "with_${ac_package}='$ac_optarg'" ;;
-+
-+  -without-* | --without-*)
-+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-+    # Reject names that are not valid shell variable names.
-+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-+    fi
-+    ac_package=`echo $ac_package| sed 's/-/_/g'`
-+    eval "with_${ac_package}=no" ;;
-+
-+  --x)
-+    # Obsolete; use --with-x.
-+    with_x=yes ;;
-+
-+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-+  | --x-incl | --x-inc | --x-in | --x-i)
-+    ac_prev=x_includes ;;
-+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-+    x_includes="$ac_optarg" ;;
-+
-+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-+    ac_prev=x_libraries ;;
-+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-+    x_libraries="$ac_optarg" ;;
-+
-+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-+    ;;
-+
-+  *)
-+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-+      echo "configure: warning: $ac_option: invalid host type" 1>&2
-+    fi
-+    if test "x$nonopt" != xNONE; then
-+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-+    fi
-+    nonopt="$ac_option"
-+    ;;
-+
-+  esac
-+done
-+
-+if test -n "$ac_prev"; then
-+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-+fi
-+
-+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-+
-+# File descriptor usage:
-+# 0 standard input
-+# 1 file creation
-+# 2 errors and warnings
-+# 3 some systems may open it to /dev/tty
-+# 4 used on the Kubota Titan
-+# 6 checking for... messages and results
-+# 5 compiler messages saved in config.log
-+if test "$silent" = yes; then
-+  exec 6>/dev/null
-+else
-+  exec 6>&1
-+fi
-+exec 5>./config.log
-+
-+echo "\
-+This file contains any messages produced by compilers while
-+running configure, to aid debugging if configure makes a mistake.
-+" 1>&5
-+
-+# Strip out --no-create and --no-recursion so they do not pile up.
-+# Also quote any args containing shell metacharacters.
-+ac_configure_args=
-+for ac_arg
-+do
-+  case "$ac_arg" in
-+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-+  | --no-cr | --no-c) ;;
-+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-+  esac
-+done
-+
-+# NLS nuisances.
-+# Only set these to C if already set.  These must not be set unconditionally
-+# because not all systems understand e.g. LANG=C (notably SCO).
-+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-+# Non-C LC_CTYPE values break the ctype check.
-+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-+
-+# confdefs.h avoids OS command line length limits that DEFS can exceed.
-+rm -rf conftest* confdefs.h
-+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-+echo > confdefs.h
-+
-+# A filename unique to this package, relative to the directory that
-+# configure is in, which we can look for to find out if srcdir is correct.
-+ac_unique_file=Makefile.am
-+
-+# Find the source files, if location was not specified.
-+if test -z "$srcdir"; then
-+  ac_srcdir_defaulted=yes
-+  # Try the directory containing this script, then its parent.
-+  ac_prog=$0
-+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-+  srcdir=$ac_confdir
-+  if test ! -r $srcdir/$ac_unique_file; then
-+    srcdir=..
-+  fi
-+else
-+  ac_srcdir_defaulted=no
-+fi
-+if test ! -r $srcdir/$ac_unique_file; then
-+  if test "$ac_srcdir_defaulted" = yes; then
-+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-+  else
-+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-+  fi
-+fi
-+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-+
-+# Prefer explicitly selected file to automatically selected ones.
-+if test -z "$CONFIG_SITE"; then
-+  if test "x$prefix" != xNONE; then
-+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-+  else
-+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-+  fi
-+fi
-+for ac_site_file in $CONFIG_SITE; do
-+  if test -r "$ac_site_file"; then
-+    echo "loading site script $ac_site_file"
-+    . "$ac_site_file"
-+  fi
-+done
-+
-+if test -r "$cache_file"; then
-+  echo "loading cache $cache_file"
-+  . $cache_file
-+else
-+  echo "creating cache $cache_file"
-+  > $cache_file
-+fi
-+
-+ac_ext=c
-+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-+ac_cpp='$CPP $CPPFLAGS'
-+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-+cross_compiling=$ac_cv_prog_cc_cross
-+
-+ac_exeext=
-+ac_objext=o
-+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-+    ac_n= ac_c='
-+' ac_t='	'
-+  else
-+    ac_n=-n ac_c= ac_t=
-+  fi
-+else
-+  ac_n= ac_c='\c' ac_t=
-+fi
-+
-+
-+
-+ac_aux_dir=
-+for ac_dir in ../../../.. $srcdir/../../../..; do
-+  if test -f $ac_dir/install-sh; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/install-sh -c"
-+    break
-+  elif test -f $ac_dir/install.sh; then
-+    ac_aux_dir=$ac_dir
-+    ac_install_sh="$ac_aux_dir/install.sh -c"
-+    break
-+  fi
-+done
-+if test -z "$ac_aux_dir"; then
-+  { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
-+fi
-+ac_config_guess=$ac_aux_dir/config.guess
-+ac_config_sub=$ac_aux_dir/config.sub
-+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-+
-+
-+am__api_version="1.4"
-+# Find a good install program.  We prefer a C program (faster),
-+# so one script is as good as another.  But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# ./install, which can be erroneously created by make from ./install.sh.
-+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-+echo "configure:578: checking for a BSD compatible install" >&5
-+if test -z "$INSTALL"; then
-+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-+  for ac_dir in $PATH; do
-+    # Account for people who put trailing slashes in PATH elements.
-+    case "$ac_dir/" in
-+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-+    *)
-+      # OSF1 and SCO ODT 3.0 have their own names for install.
-+      # Don't use installbsd from OSF since it installs stuff as root
-+      # by default.
-+      for ac_prog in ginstall scoinst install; do
-+        if test -f $ac_dir/$ac_prog; then
-+	  if test $ac_prog = install &&
-+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-+	    # AIX install.  It has an incompatible calling convention.
-+	    :
-+	  else
-+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-+	    break 2
-+	  fi
-+	fi
-+      done
-+      ;;
-+    esac
-+  done
-+  IFS="$ac_save_IFS"
-+
-+fi
-+  if test "${ac_cv_path_install+set}" = set; then
-+    INSTALL="$ac_cv_path_install"
-+  else
-+    # As a last resort, use the slow shell script.  We don't cache a
-+    # path for INSTALL within a source directory, because that will
-+    # break other packages using the cache if that directory is
-+    # removed, or if the path is relative.
-+    INSTALL="$ac_install_sh"
-+  fi
-+fi
-+echo "$ac_t""$INSTALL" 1>&6
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-+echo "configure:631: checking whether build environment is sane" >&5
-+# Just in case
-+sleep 1
-+echo timestamp > conftestfile
-+# Do `set' in a subshell so we don't clobber the current shell's
-+# arguments.  Must try -L first in case configure is actually a
-+# symlink; some systems play weird games with the mod time of symlinks
-+# (eg FreeBSD returns the mod time of the symlink's containing
-+# directory).
-+if (
-+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-+   if test "$*" = "X"; then
-+      # -L didn't work.
-+      set X `ls -t $srcdir/configure conftestfile`
-+   fi
-+   if test "$*" != "X $srcdir/configure conftestfile" \
-+      && test "$*" != "X conftestfile $srcdir/configure"; then
-+
-+      # If neither matched, then we have a broken ls.  This can happen
-+      # if, for instance, CONFIG_SHELL is bash and it inherits a
-+      # broken ls alias from the environment.  This has actually
-+      # happened.  Such a system could not be considered "sane".
-+      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-+alias in your environment" 1>&2; exit 1; }
-+   fi
-+
-+   test "$2" = conftestfile
-+   )
-+then
-+   # Ok.
-+   :
-+else
-+   { echo "configure: error: newly created file is older than distributed files!
-+Check your system clock" 1>&2; exit 1; }
-+fi
-+rm -f conftest*
-+echo "$ac_t""yes" 1>&6
-+if test "$program_transform_name" = s,x,x,; then
-+  program_transform_name=
-+else
-+  # Double any \ or $.  echo might interpret backslashes.
-+  cat <<\EOF_SED > conftestsed
-+s,\\,\\\\,g; s,\$,$$,g
-+EOF_SED
-+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-+  rm -f conftestsed
-+fi
-+test "$program_prefix" != NONE &&
-+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-+# Use a double $ so make ignores it.
-+test "$program_suffix" != NONE &&
-+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-+
-+# sed with no file args requires a program.
-+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-+
-+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-+echo "configure:688: checking whether ${MAKE-make} sets \${MAKE}" >&5
-+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftestmake <<\EOF
-+all:
-+	@echo 'ac_maketemp="${MAKE}"'
-+EOF
-+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-+if test -n "$ac_maketemp"; then
-+  eval ac_cv_prog_make_${ac_make}_set=yes
-+else
-+  eval ac_cv_prog_make_${ac_make}_set=no
-+fi
-+rm -f conftestmake
-+fi
-+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-+  echo "$ac_t""yes" 1>&6
-+  SET_MAKE=
-+else
-+  echo "$ac_t""no" 1>&6
-+  SET_MAKE="MAKE=${MAKE-make}"
-+fi
-+
-+if test $host != $build; then
-+  ac_tool_prefix=${host_alias}-
-+else
-+  ac_tool_prefix=
-+fi
-+
-+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-+echo "configure:721: checking for Cygwin environment" >&5
-+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftest.$ac_ext <<EOF
-+#line 726 "configure"
-+#include "confdefs.h"
-+
-+int main() {
-+
-+#ifndef __CYGWIN__
-+#define __CYGWIN__ __CYGWIN32__
-+#endif
-+return __CYGWIN__;
-+; return 0; }
-+EOF
-+if { (eval echo configure:737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+  rm -rf conftest*
-+  ac_cv_cygwin=yes
-+else
-+  echo "configure: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  ac_cv_cygwin=no
-+fi
-+rm -f conftest*
-+rm -f conftest*
-+fi
-+
-+echo "$ac_t""$ac_cv_cygwin" 1>&6
-+CYGWIN=
-+test "$ac_cv_cygwin" = yes && CYGWIN=yes
-+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-+echo "configure:754: checking for mingw32 environment" >&5
-+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftest.$ac_ext <<EOF
-+#line 759 "configure"
-+#include "confdefs.h"
-+
-+int main() {
-+return __MINGW32__;
-+; return 0; }
-+EOF
-+if { (eval echo configure:766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-+  rm -rf conftest*
-+  ac_cv_mingw32=yes
-+else
-+  echo "configure: failed program was:" >&5
-+  cat conftest.$ac_ext >&5
-+  rm -rf conftest*
-+  ac_cv_mingw32=no
-+fi
-+rm -f conftest*
-+rm -f conftest*
-+fi
-+
-+echo "$ac_t""$ac_cv_mingw32" 1>&6
-+MINGW32=
-+test "$ac_cv_mingw32" = yes && MINGW32=yes
-+
-+# Check whether --enable-multilib or --disable-multilib was given.
-+if test "${enable_multilib+set}" = set; then
-+  enableval="$enable_multilib"
-+  case "${enableval}" in
-+  yes) multilib=yes ;;
-+  no)  multilib=no ;;
-+  *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  multilib=yes
-+fi
-+
-+# Check whether --enable-target-optspace or --disable-target-optspace was given.
-+if test "${enable_target_optspace+set}" = set; then
-+  enableval="$enable_target_optspace"
-+  case "${enableval}" in
-+  yes) target_optspace=yes ;;
-+  no)  target_optspace=no ;;
-+  *)   { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  target_optspace=
-+fi
-+
-+# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
-+if test "${enable_malloc_debugging+set}" = set; then
-+  enableval="$enable_malloc_debugging"
-+  case "${enableval}" in
-+  yes) malloc_debugging=yes ;;
-+  no)  malloc_debugging=no ;;
-+  *)   { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  malloc_debugging=
-+fi
-+
-+# Check whether --enable-newlib-multithread or --disable-newlib-multithread was given.
-+if test "${enable_newlib_multithread+set}" = set; then
-+  enableval="$enable_newlib_multithread"
-+  case "${enableval}" in
-+  yes) newlib_multithread=yes ;;
-+  no)  newlib_multithread=no ;;
-+  *)   { echo "configure: error: bad value ${enableval} for newlib-multithread option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  newlib_multithread=yes
-+fi
-+
-+# Check whether --enable-newlib-iconv or --disable-newlib-iconv was given.
-+if test "${enable_newlib_iconv+set}" = set; then
-+  enableval="$enable_newlib_iconv"
-+  if test "${newlib_iconv+set}" != set; then
-+   case "${enableval}" in
-+     yes) newlib_iconv=yes ;;
-+     no)  newlib_iconv=no ;;
-+     *)   { echo "configure: error: bad value ${enableval} for newlib-iconv option" 1>&2; exit 1; } ;;
-+   esac
-+ fi
-+else
-+  newlib_iconv=${newlib_iconv}
-+fi
-+
-+# Check whether --enable-newlib-elix-level or --disable-newlib-elix-level was given.
-+if test "${enable_newlib_elix_level+set}" = set; then
-+  enableval="$enable_newlib_elix_level"
-+  case "${enableval}" in
-+  0)   newlib_elix_level=0 ;;
-+  1)   newlib_elix_level=1 ;;
-+  2)   newlib_elix_level=2 ;;
-+  3)   newlib_elix_level=3 ;;
-+  4)   newlib_elix_level=4 ;;
-+  *)   { echo "configure: error: bad value ${enableval} for newlib-elix-level option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  newlib_elix_level=0
-+fi
-+
-+# Check whether --enable-newlib-io-float or --disable-newlib-io-float was given.
-+if test "${enable_newlib_io_float+set}" = set; then
-+  enableval="$enable_newlib_io_float"
-+  case "${enableval}" in
-+  yes) newlib_io_float=yes ;;
-+  no)  newlib_io_float=no ;;
-+  *)   { echo "configure: error: bad value ${enableval} for newlib-io-float option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  newlib_io_float=yes
-+fi
-+
-+# Check whether --enable-newlib-supplied-syscalls or --disable-newlib-supplied-syscalls was given.
-+if test "${enable_newlib_supplied_syscalls+set}" = set; then
-+  enableval="$enable_newlib_supplied_syscalls"
-+  case "${enableval}" in
-+  yes) newlib_may_supply_syscalls=yes ;;
-+  no)  newlib_may_supply_syscalls=no ;;
-+  *)   { echo "configure: error: bad value ${enableval} for newlib-supplied-syscalls option" 1>&2; exit 1; } ;;
-+ esac
-+else
-+  newlib_may_supply_syscalls=yes
-+fi
-+
-+
-+
-+if test x${newlib_may_supply_syscalls} = xyes; then
-+  MAY_SUPPLY_SYSCALLS_TRUE=
-+  MAY_SUPPLY_SYSCALLS_FALSE='#'
-+else
-+  MAY_SUPPLY_SYSCALLS_TRUE='#'
-+  MAY_SUPPLY_SYSCALLS_FALSE=
-+fi
-+
-+
-+test -z "${with_target_subdir}" && with_target_subdir=.
-+
-+if test "${srcdir}" = "."; then
-+  if test "${with_target_subdir}" != "."; then
-+    newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
-+  else
-+    newlib_basedir="${srcdir}/${with_multisrctop}../../.."
-+  fi
-+else
-+  newlib_basedir="${srcdir}/../../.."
-+fi
-+
-+
-+
-+# Do some error checking and defaulting for the host and target type.
-+# The inputs are:
-+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-+#
-+# The rules are:
-+# 1. You are not allowed to specify --host, --target, and nonopt at the
-+#    same time.
-+# 2. Host defaults to nonopt.
-+# 3. If nonopt is not specified, then host defaults to the current host,
-+#    as determined by config.guess.
-+# 4. Target and build default to nonopt.
-+# 5. If nonopt is not specified, then target and build default to host.
-+
-+# The aliases save the names the user supplied, while $host etc.
-+# will get canonicalized.
-+case $host---$target---$nonopt in
-+NONE---*---* | *---NONE---* | *---*---NONE) ;;
-+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-+esac
-+
-+
-+# Make sure we can run config.sub.
-+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-+fi
-+
-+echo $ac_n "checking host system type""... $ac_c" 1>&6
-+echo "configure:936: checking host system type" >&5
-+
-+host_alias=$host
-+case "$host_alias" in
-+NONE)
-+  case $nonopt in
-+  NONE)
-+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-+    fi ;;
-+  *) host_alias=$nonopt ;;
-+  esac ;;
-+esac
-+
-+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+echo "$ac_t""$host" 1>&6
-+
-+echo $ac_n "checking target system type""... $ac_c" 1>&6
-+echo "configure:957: checking target system type" >&5
-+
-+target_alias=$target
-+case "$target_alias" in
-+NONE)
-+  case $nonopt in
-+  NONE) target_alias=$host_alias ;;
-+  *) target_alias=$nonopt ;;
-+  esac ;;
-+esac
-+
-+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+echo "$ac_t""$target" 1>&6
-+
-+echo $ac_n "checking build system type""... $ac_c" 1>&6
-+echo "configure:975: checking build system type" >&5
-+
-+build_alias=$build
-+case "$build_alias" in
-+NONE)
-+  case $nonopt in
-+  NONE) build_alias=$host_alias ;;
-+  *) build_alias=$nonopt ;;
-+  esac ;;
-+esac
-+
-+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-+echo "$ac_t""$build" 1>&6
-+
-+test "$host_alias" != "$target_alias" &&
-+  test "$program_prefix$program_suffix$program_transform_name" = \
-+    NONENONEs,x,x, &&
-+  program_prefix=${target_alias}-
-+
-+
-+
-+PACKAGE=newlib
-+
-+VERSION=1.14.0
-+
-+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-+fi
-+cat >> confdefs.h <<EOF
-+#define PACKAGE "$PACKAGE"
-+EOF
-+
-+cat >> confdefs.h <<EOF
-+#define VERSION "$VERSION"
-+EOF
-+
-+
-+
-+missing_dir=`cd $ac_aux_dir && pwd`
-+echo $ac_n "checking for working aclocal-${am__api_version}""... $ac_c" 1>&6
-+echo "configure:1018: checking for working aclocal-${am__api_version}" >&5
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf.  Sigh.
-+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
-+   ACLOCAL=aclocal-${am__api_version}
-+   echo "$ac_t""found" 1>&6
-+else
-+   ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
-+   echo "$ac_t""missing" 1>&6
-+fi
-+
-+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-+echo "configure:1031: checking for working autoconf" >&5
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf.  Sigh.
-+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-+   AUTOCONF=autoconf
-+   echo "$ac_t""found" 1>&6
-+else
-+   AUTOCONF="$missing_dir/missing autoconf"
-+   echo "$ac_t""missing" 1>&6
-+fi
-+
-+echo $ac_n "checking for working automake-${am__api_version}""... $ac_c" 1>&6
-+echo "configure:1044: checking for working automake-${am__api_version}" >&5
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf.  Sigh.
-+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
-+   AUTOMAKE=automake-${am__api_version}
-+   echo "$ac_t""found" 1>&6
-+else
-+   AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
-+   echo "$ac_t""missing" 1>&6
-+fi
-+
-+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-+echo "configure:1057: checking for working autoheader" >&5
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf.  Sigh.
-+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-+   AUTOHEADER=autoheader
-+   echo "$ac_t""found" 1>&6
-+else
-+   AUTOHEADER="$missing_dir/missing autoheader"
-+   echo "$ac_t""missing" 1>&6
-+fi
-+
-+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-+echo "configure:1070: checking for working makeinfo" >&5
-+# Run test in a subshell; some versions of sh will print an error if
-+# an executable is not found, even if stderr is redirected.
-+# Redirect stdin to placate older versions of autoconf.  Sigh.
-+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-+   MAKEINFO=makeinfo
-+   echo "$ac_t""found" 1>&6
-+else
-+   MAKEINFO="$missing_dir/missing makeinfo"
-+   echo "$ac_t""missing" 1>&6
-+fi
-+
-+
-+
-+# FIXME: We temporarily define our own version of AC_PROG_CC.  This is
-+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS.  We
-+# are probably using a cross compiler, which will not be able to fully
-+# link an executable.  This should really be fixed in autoconf
-+# itself.
-+
-+
-+
-+# Extract the first word of "gcc", so it can be a program name with args.
-+set dummy gcc; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:1095: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-+  ac_dummy="$PATH"
-+  for ac_dir in $ac_dummy; do
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/$ac_word; then
-+      ac_cv_prog_CC="gcc"
-+      break
-+    fi
-+  done
-+  IFS="$ac_save_ifs"
-+fi
-+fi
-+CC="$ac_cv_prog_CC"
-+if test -n "$CC"; then
-+  echo "$ac_t""$CC" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+if test -z "$CC"; then
-+  # Extract the first word of "cc", so it can be a program name with args.
-+set dummy cc; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:1125: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test -n "$CC"; then
-+  ac_cv_prog_CC="$CC" # Let the user override the test.
-+else
-+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-+  ac_prog_rejected=no
-+  ac_dummy="$PATH"
-+  for ac_dir in $ac_dummy; do
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/$ac_word; then
-+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-+        ac_prog_rejected=yes
-+	continue
-+      fi
-+      ac_cv_prog_CC="cc"
-+      break
-+    fi
-+  done
-+  IFS="$ac_save_ifs"
-+if test $ac_prog_rejected = yes; then
-+  # We found a bogon in the path, so make sure we never use it.
-+  set dummy $ac_cv_prog_CC
-+  shift
-+  if test $# -gt 0; then
-+    # We chose a different compiler from the bogus one.
-+    # However, it has the same basename, so the bogon will be chosen
-+    # first if we set CC to just the basename; use the full file name.
-+    shift
-+    set dummy "$ac_dir/$ac_word" "$@"
-+    shift
-+    ac_cv_prog_CC="$@"
-+  fi
-+fi
-+fi
-+fi
-+CC="$ac_cv_prog_CC"
-+if test -n "$CC"; then
-+  echo "$ac_t""$CC" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-+fi
-+
-+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-+echo "configure:1174: checking whether we are using GNU C" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  cat > conftest.c <<EOF
-+#ifdef __GNUC__
-+  yes;
-+#endif
-+EOF
-+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-+  ac_cv_prog_gcc=yes
-+else
-+  ac_cv_prog_gcc=no
-+fi
-+fi
-+
-+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-+
-+if test $ac_cv_prog_gcc = yes; then
-+  GCC=yes
-+  ac_test_CFLAGS="${CFLAGS+set}"
-+  ac_save_CFLAGS="$CFLAGS"
-+  CFLAGS=
-+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-+echo "configure:1198: checking whether ${CC-cc} accepts -g" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  echo 'void f(){}' > conftest.c
-+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-+  ac_cv_prog_cc_g=yes
-+else
-+  ac_cv_prog_cc_g=no
-+fi
-+rm -f conftest*
-+
-+fi
-+
-+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-+  if test "$ac_test_CFLAGS" = set; then
-+    CFLAGS="$ac_save_CFLAGS"
-+  elif test $ac_cv_prog_cc_g = yes; then
-+    CFLAGS="-g -O2"
-+  else
-+    CFLAGS="-O2"
-+  fi
-+else
-+  GCC=
-+  test "${CFLAGS+set}" = set || CFLAGS="-g"
-+fi
-+
-+
-+# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}as; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:1229: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test -n "$AS"; then
-+  ac_cv_prog_AS="$AS" # Let the user override the test.
-+else
-+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-+  ac_dummy="$PATH"
-+  for ac_dir in $ac_dummy; do
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/$ac_word; then
-+      ac_cv_prog_AS="${ac_tool_prefix}as"
-+      break
-+    fi
-+  done
-+  IFS="$ac_save_ifs"
-+  test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
-+fi
-+fi
-+AS="$ac_cv_prog_AS"
-+if test -n "$AS"; then
-+  echo "$ac_t""$AS" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+
-+
-+# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ar; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:1261: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test -n "$AR"; then
-+  ac_cv_prog_AR="$AR" # Let the user override the test.
-+else
-+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-+  ac_dummy="$PATH"
-+  for ac_dir in $ac_dummy; do
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/$ac_word; then
-+      ac_cv_prog_AR="${ac_tool_prefix}ar"
-+      break
-+    fi
-+  done
-+  IFS="$ac_save_ifs"
-+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
-+fi
-+fi
-+AR="$ac_cv_prog_AR"
-+if test -n "$AR"; then
-+  echo "$ac_t""$AR" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+
-+
-+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:1293: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test -n "$RANLIB"; then
-+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-+  ac_dummy="$PATH"
-+  for ac_dir in $ac_dummy; do
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/$ac_word; then
-+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-+      break
-+    fi
-+  done
-+  IFS="$ac_save_ifs"
-+fi
-+fi
-+RANLIB="$ac_cv_prog_RANLIB"
-+if test -n "$RANLIB"; then
-+  echo "$ac_t""$RANLIB" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+
-+if test -z "$ac_cv_prog_RANLIB"; then
-+if test -n "$ac_tool_prefix"; then
-+  # Extract the first word of "ranlib", so it can be a program name with args.
-+set dummy ranlib; ac_word=$2
-+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-+echo "configure:1325: checking for $ac_word" >&5
-+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test -n "$RANLIB"; then
-+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-+else
-+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-+  ac_dummy="$PATH"
-+  for ac_dir in $ac_dummy; do
-+    test -z "$ac_dir" && ac_dir=.
-+    if test -f $ac_dir/$ac_word; then
-+      ac_cv_prog_RANLIB="ranlib"
-+      break
-+    fi
-+  done
-+  IFS="$ac_save_ifs"
-+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-+fi
-+fi
-+RANLIB="$ac_cv_prog_RANLIB"
-+if test -n "$RANLIB"; then
-+  echo "$ac_t""$RANLIB" 1>&6
-+else
-+  echo "$ac_t""no" 1>&6
-+fi
-+
-+else
-+  RANLIB=":"
-+fi
-+fi
-+
-+
-+# Find a good install program.  We prefer a C program (faster),
-+# so one script is as good as another.  But avoid the broken or
-+# incompatible versions:
-+# SysV /etc/install, /usr/sbin/install
-+# SunOS /usr/etc/install
-+# IRIX /sbin/install
-+# AIX /bin/install
-+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-+# ./install, which can be erroneously created by make from ./install.sh.
-+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-+echo "configure:1370: checking for a BSD compatible install" >&5
-+if test -z "$INSTALL"; then
-+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-+  for ac_dir in $PATH; do
-+    # Account for people who put trailing slashes in PATH elements.
-+    case "$ac_dir/" in
-+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-+    *)
-+      # OSF1 and SCO ODT 3.0 have their own names for install.
-+      # Don't use installbsd from OSF since it installs stuff as root
-+      # by default.
-+      for ac_prog in ginstall scoinst install; do
-+        if test -f $ac_dir/$ac_prog; then
-+	  if test $ac_prog = install &&
-+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-+	    # AIX install.  It has an incompatible calling convention.
-+	    :
-+	  else
-+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-+	    break 2
-+	  fi
-+	fi
-+      done
-+      ;;
-+    esac
-+  done
-+  IFS="$ac_save_IFS"
-+
-+fi
-+  if test "${ac_cv_path_install+set}" = set; then
-+    INSTALL="$ac_cv_path_install"
-+  else
-+    # As a last resort, use the slow shell script.  We don't cache a
-+    # path for INSTALL within a source directory, because that will
-+    # break other packages using the cache if that directory is
-+    # removed, or if the path is relative.
-+    INSTALL="$ac_install_sh"
-+  fi
-+fi
-+echo "$ac_t""$INSTALL" 1>&6
-+
-+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-+# It thinks the first close brace ends the variable substitution.
-+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-+
-+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-+
-+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-+
-+
-+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-+echo "configure:1424: checking whether to enable maintainer-specific portions of Makefiles" >&5
-+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
-+if test "${enable_maintainer_mode+set}" = set; then
-+  enableval="$enable_maintainer_mode"
-+  USE_MAINTAINER_MODE=$enableval
-+else
-+  USE_MAINTAINER_MODE=no
-+fi
-+
-+  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
-+  
-+
-+if test $USE_MAINTAINER_MODE = yes; then
-+  MAINTAINER_MODE_TRUE=
-+  MAINTAINER_MODE_FALSE='#'
-+else
-+  MAINTAINER_MODE_TRUE='#'
-+  MAINTAINER_MODE_FALSE=
-+fi
-+  MAINT=$MAINTAINER_MODE_TRUE
-+  
-+
-+
-+# We need AC_EXEEXT to keep automake happy in cygnus mode.  However,
-+# at least currently, we never actually build a program, so we never
-+# need to use $(EXEEXT).  Moreover, the test for EXEEXT normally
-+# fails, because we are probably configuring with a cross compiler
-+# which can't create executables.  So we include AC_EXEEXT to keep
-+# automake happy, but we don't execute it, since we don't care about
-+# the result.
-+if false; then
-+  
-+
-+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-+echo "configure:1458: checking for executable suffix" >&5
-+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
-+  echo $ac_n "(cached) $ac_c" 1>&6
-+else
-+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
-+  ac_cv_exeext=.exe
-+else
-+  rm -f conftest*
-+  echo 'int main () { return 0; }' > conftest.$ac_ext
-+  ac_cv_exeext=
-+  if { (eval echo configure:1468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
-+    for file in conftest.*; do
-+      case $file in
-+      *.c | *.o | *.obj) ;;
-+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
-+      esac
-+    done
-+  else
-+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
-+  fi
-+  rm -f conftest*
-+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
-+fi
-+fi
-+
-+EXEEXT=""
-+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-+echo "$ac_t""${ac_cv_exeext}" 1>&6
-+ac_exeext=$EXEEXT
-+
-+fi
-+
-+. ${newlib_basedir}/configure.host
-+
-+newlib_cflags="${newlib_cflags} -fno-builtin"
-+
-+NEWLIB_CFLAGS=${newlib_cflags}
-+
-+
-+LDFLAGS=${ldflags}
-+
-+
-+
-+
-+if test x${newlib_elix_level} = x0; then
-+  ELIX_LEVEL_0_TRUE=
-+  ELIX_LEVEL_0_FALSE='#'
-+else
-+  ELIX_LEVEL_0_TRUE='#'
-+  ELIX_LEVEL_0_FALSE=
-+fi
-+
-+
-+if test x${newlib_elix_level} = x1; then
-+  ELIX_LEVEL_1_TRUE=
-+  ELIX_LEVEL_1_FALSE='#'
-+else
-+  ELIX_LEVEL_1_TRUE='#'
-+  ELIX_LEVEL_1_FALSE=
-+fi
-+
-+
-+if test x${newlib_elix_level} = x2; then
-+  ELIX_LEVEL_2_TRUE=
-+  ELIX_LEVEL_2_FALSE='#'
-+else
-+  ELIX_LEVEL_2_TRUE='#'
-+  ELIX_LEVEL_2_FALSE=
-+fi
-+
-+
-+if test x${newlib_elix_level} = x3; then
-+  ELIX_LEVEL_3_TRUE=
-+  ELIX_LEVEL_3_FALSE='#'
-+else
-+  ELIX_LEVEL_3_TRUE='#'
-+  ELIX_LEVEL_3_FALSE=
-+fi
-+
-+
-+if test x${newlib_elix_level} = x4; then
-+  ELIX_LEVEL_4_TRUE=
-+  ELIX_LEVEL_4_FALSE='#'
-+else
-+  ELIX_LEVEL_4_TRUE='#'
-+  ELIX_LEVEL_4_FALSE=
-+fi
-+
-+
-+
-+if test x${use_libtool} = xyes; then
-+  USE_LIBTOOL_TRUE=
-+  USE_LIBTOOL_FALSE='#'
-+else
-+  USE_LIBTOOL_TRUE='#'
-+  USE_LIBTOOL_FALSE=
-+fi
-+
-+# Hard-code OBJEXT.  Normally it is set by AC_OBJEXT, but we
-+# use oext, which is set in configure.host based on the target platform.
-+OBJEXT=${oext}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+trap '' 1 2 15
-+cat > confcache <<\EOF
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs.  It is not useful on other systems.
-+# If it contains results you don't want to keep, you may remove or edit it.
-+#
-+# By default, configure uses ./config.cache as the cache file,
-+# creating it if it does not exist already.  You can give configure
-+# the --cache-file=FILE option to use a different cache file; that is
-+# what configure does when it calls configure scripts in
-+# subdirectories, so they share the cache.
-+# Giving --cache-file=/dev/null disables caching, for debugging configure.
-+# config.status only pays attention to the cache file if you give it the
-+# --recheck option to rerun configure.
-+#
-+EOF
-+# The following way of writing the cache mishandles newlines in values,
-+# but we know of no workaround that is simple, portable, and efficient.
-+# So, don't put newlines in cache variables' values.
-+# Ultrix sh set writes to stderr and can't be redirected directly,
-+# and sets the high bit in the cache file unless we assign to the vars.
-+(set) 2>&1 |
-+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-+  *ac_space=\ *)
-+    # `set' does not quote correctly, so add quotes (double-quote substitution
-+    # turns \\\\ into \\, and sed turns \\ into \).
-+    sed -n \
-+      -e "s/'/'\\\\''/g" \
-+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-+    ;;
-+  *)
-+    # `set' quotes correctly as required by POSIX, so do not add quotes.
-+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-+    ;;
-+  esac >> confcache
-+if cmp -s $cache_file confcache; then
-+  :
-+else
-+  if test -w $cache_file; then
-+    echo "updating cache $cache_file"
-+    cat confcache > $cache_file
-+  else
-+    echo "not updating unwritable cache $cache_file"
-+  fi
-+fi
-+rm -f confcache
-+
-+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-+
-+test "x$prefix" = xNONE && prefix=$ac_default_prefix
-+# Let make expand exec_prefix.
-+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-+
-+# Any assignment to VPATH causes Sun make to only execute
-+# the first set of double-colon rules, so remove it if not needed.
-+# If there is a colon in the path, we need to keep it.
-+if test "x$srcdir" = x.; then
-+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-+fi
-+
-+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-+
-+# Transform confdefs.h into DEFS.
-+# Protect against shell expansion while executing Makefile rules.
-+# Protect against Makefile macro expansion.
-+cat > conftest.defs <<\EOF
-+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-+s%\[%\\&%g
-+s%\]%\\&%g
-+s%\$%$$%g
-+EOF
-+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-+rm -f conftest.defs
-+
-+
-+# Without the "./", some shells look in PATH for config.status.
-+: ${CONFIG_STATUS=./config.status}
-+
-+echo creating $CONFIG_STATUS
-+rm -f $CONFIG_STATUS
-+cat > $CONFIG_STATUS <<EOF
-+#! /bin/sh
-+# Generated automatically by configure.
-+# Run this file to recreate the current configuration.
-+# This directory was configured as follows,
-+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-+#
-+# $0 $ac_configure_args
-+#
-+# Compiler output produced by configure, useful for debugging
-+# configure, is in ./config.log if it exists.
-+
-+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-+for ac_option
-+do
-+  case "\$ac_option" in
-+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-+    exit 0 ;;
-+  -help | --help | --hel | --he | --h)
-+    echo "\$ac_cs_usage"; exit 0 ;;
-+  *) echo "\$ac_cs_usage"; exit 1 ;;
-+  esac
-+done
-+
-+ac_given_srcdir=$srcdir
-+ac_given_INSTALL="$INSTALL"
-+
-+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-+EOF
-+cat >> $CONFIG_STATUS <<EOF
-+
-+# Protect against being on the right side of a sed subst in config.status.
-+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
-+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-+$ac_vpsub
-+$extrasub
-+s%@SHELL@%$SHELL%g
-+s%@CFLAGS@%$CFLAGS%g
-+s%@CPPFLAGS@%$CPPFLAGS%g
-+s%@CXXFLAGS@%$CXXFLAGS%g
-+s%@FFLAGS@%$FFLAGS%g
-+s%@DEFS@%$DEFS%g
-+s%@LDFLAGS@%$LDFLAGS%g
-+s%@LIBS@%$LIBS%g
-+s%@exec_prefix@%$exec_prefix%g
-+s%@prefix@%$prefix%g
-+s%@program_transform_name@%$program_transform_name%g
-+s%@bindir@%$bindir%g
-+s%@sbindir@%$sbindir%g
-+s%@libexecdir@%$libexecdir%g
-+s%@datadir@%$datadir%g
-+s%@sysconfdir@%$sysconfdir%g
-+s%@sharedstatedir@%$sharedstatedir%g
-+s%@localstatedir@%$localstatedir%g
-+s%@libdir@%$libdir%g
-+s%@includedir@%$includedir%g
-+s%@oldincludedir@%$oldincludedir%g
-+s%@infodir@%$infodir%g
-+s%@mandir@%$mandir%g
-+s%@MAY_SUPPLY_SYSCALLS_TRUE@%$MAY_SUPPLY_SYSCALLS_TRUE%g
-+s%@MAY_SUPPLY_SYSCALLS_FALSE@%$MAY_SUPPLY_SYSCALLS_FALSE%g
-+s%@newlib_basedir@%$newlib_basedir%g
-+s%@host@%$host%g
-+s%@host_alias@%$host_alias%g
-+s%@host_cpu@%$host_cpu%g
-+s%@host_vendor@%$host_vendor%g
-+s%@host_os@%$host_os%g
-+s%@target@%$target%g
-+s%@target_alias@%$target_alias%g
-+s%@target_cpu@%$target_cpu%g
-+s%@target_vendor@%$target_vendor%g
-+s%@target_os@%$target_os%g
-+s%@build@%$build%g
-+s%@build_alias@%$build_alias%g
-+s%@build_cpu@%$build_cpu%g
-+s%@build_vendor@%$build_vendor%g
-+s%@build_os@%$build_os%g
-+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-+s%@INSTALL_DATA@%$INSTALL_DATA%g
-+s%@PACKAGE@%$PACKAGE%g
-+s%@VERSION@%$VERSION%g
-+s%@ACLOCAL@%$ACLOCAL%g
-+s%@AUTOCONF@%$AUTOCONF%g
-+s%@AUTOMAKE@%$AUTOMAKE%g
-+s%@AUTOHEADER@%$AUTOHEADER%g
-+s%@MAKEINFO@%$MAKEINFO%g
-+s%@SET_MAKE@%$SET_MAKE%g
-+s%@CC@%$CC%g
-+s%@AS@%$AS%g
-+s%@AR@%$AR%g
-+s%@RANLIB@%$RANLIB%g
-+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
-+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
-+s%@MAINT@%$MAINT%g
-+s%@EXEEXT@%$EXEEXT%g
-+s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
-+s%@ELIX_LEVEL_0_TRUE@%$ELIX_LEVEL_0_TRUE%g
-+s%@ELIX_LEVEL_0_FALSE@%$ELIX_LEVEL_0_FALSE%g
-+s%@ELIX_LEVEL_1_TRUE@%$ELIX_LEVEL_1_TRUE%g
-+s%@ELIX_LEVEL_1_FALSE@%$ELIX_LEVEL_1_FALSE%g
-+s%@ELIX_LEVEL_2_TRUE@%$ELIX_LEVEL_2_TRUE%g
-+s%@ELIX_LEVEL_2_FALSE@%$ELIX_LEVEL_2_FALSE%g
-+s%@ELIX_LEVEL_3_TRUE@%$ELIX_LEVEL_3_TRUE%g
-+s%@ELIX_LEVEL_3_FALSE@%$ELIX_LEVEL_3_FALSE%g
-+s%@ELIX_LEVEL_4_TRUE@%$ELIX_LEVEL_4_TRUE%g
-+s%@ELIX_LEVEL_4_FALSE@%$ELIX_LEVEL_4_FALSE%g
-+s%@USE_LIBTOOL_TRUE@%$USE_LIBTOOL_TRUE%g
-+s%@USE_LIBTOOL_FALSE@%$USE_LIBTOOL_FALSE%g
-+s%@OBJEXT@%$OBJEXT%g
-+s%@oext@%$oext%g
-+s%@aext@%$aext%g
-+s%@libm_machine_dir@%$libm_machine_dir%g
-+s%@machine_dir@%$machine_dir%g
-+s%@sys_dir@%$sys_dir%g
-+
-+CEOF
-+EOF
-+
-+cat >> $CONFIG_STATUS <<\EOF
-+
-+# Split the substitutions into bite-sized pieces for seds with
-+# small command number limits, like on Digital OSF/1 and HP-UX.
-+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-+ac_file=1 # Number of current file.
-+ac_beg=1 # First line for current file.
-+ac_end=$ac_max_sed_cmds # Line after last line for current file.
-+ac_more_lines=:
-+ac_sed_cmds=""
-+while $ac_more_lines; do
-+  if test $ac_beg -gt 1; then
-+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-+  else
-+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-+  fi
-+  if test ! -s conftest.s$ac_file; then
-+    ac_more_lines=false
-+    rm -f conftest.s$ac_file
-+  else
-+    if test -z "$ac_sed_cmds"; then
-+      ac_sed_cmds="sed -f conftest.s$ac_file"
-+    else
-+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-+    fi
-+    ac_file=`expr $ac_file + 1`
-+    ac_beg=$ac_end
-+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-+  fi
-+done
-+if test -z "$ac_sed_cmds"; then
-+  ac_sed_cmds=cat
-+fi
-+EOF
-+
-+cat >> $CONFIG_STATUS <<EOF
-+
-+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
-+EOF
-+cat >> $CONFIG_STATUS <<\EOF
-+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-+  case "$ac_file" in
-+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-+  *) ac_file_in="${ac_file}.in" ;;
-+  esac
-+
-+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-+
-+  # Remove last slash and all that follows it.  Not all systems have dirname.
-+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-+    # The file is in a subdirectory.
-+    test ! -d "$ac_dir" && mkdir "$ac_dir"
-+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-+    # A "../" for each directory in $ac_dir_suffix.
-+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-+  else
-+    ac_dir_suffix= ac_dots=
-+  fi
-+
-+  case "$ac_given_srcdir" in
-+  .)  srcdir=.
-+      if test -z "$ac_dots"; then top_srcdir=.
-+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-+  *) # Relative path.
-+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-+  esac
-+
-+  case "$ac_given_INSTALL" in
-+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-+  esac
-+
-+  echo creating "$ac_file"
-+  rm -f "$ac_file"
-+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-+  case "$ac_file" in
-+  *Makefile*) ac_comsub="1i\\
-+# $configure_input" ;;
-+  *) ac_comsub= ;;
-+  esac
-+
-+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-+  sed -e "$ac_comsub
-+s%@configure_input@%$configure_input%g
-+s%@srcdir@%$srcdir%g
-+s%@top_srcdir@%$top_srcdir%g
-+s%@INSTALL@%$INSTALL%g
-+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-+fi; done
-+rm -f conftest.s*
-+
-+EOF
-+cat >> $CONFIG_STATUS <<EOF
-+
-+EOF
-+cat >> $CONFIG_STATUS <<\EOF
-+
-+exit 0
-+EOF
-+chmod +x $CONFIG_STATUS
-+rm -fr confdefs* $ac_clean_files
-+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-+
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/bfin/configure.in newlib-1.14.0/newlib/libc/machine/bfin/configure.in
---- newlib-1.14.0.orig/newlib/libc/machine/bfin/configure.in	1970-01-01 01:00:00.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/machine/bfin/configure.in	2006-09-09 06:34:24.000000000 +0200
-@@ -0,0 +1,12 @@
-+dnl This is the newlib/libc/machine/arm configure.in file.
-+dnl Process this file with autoconf to produce a configure script.
-+
-+AC_PREREQ(2.5)
-+AC_INIT(Makefile.am)
-+
-+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. 
-+AC_CONFIG_AUX_DIR(../../../..)
-+
-+NEWLIB_CONFIGURE(../../..)
-+
-+AC_OUTPUT(Makefile)
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/bfin/Makefile.am newlib-1.14.0/newlib/libc/machine/bfin/Makefile.am
---- newlib-1.14.0.orig/newlib/libc/machine/bfin/Makefile.am	1970-01-01 01:00:00.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/machine/bfin/Makefile.am	2006-09-09 06:34:24.000000000 +0200
-@@ -0,0 +1,12 @@
-+## Process this file with automake to generate Makefile.in
-+
-+AUTOMAKE_OPTIONS = cygnus
-+
-+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-+
-+noinst_LIBRARIES = lib.a
-+
-+lib_a_SOURCES = setjmp.S
-+
-+ACLOCAL_AMFLAGS = -I ../../..
-+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/bfin/Makefile.in newlib-1.14.0/newlib/libc/machine/bfin/Makefile.in
---- newlib-1.14.0.orig/newlib/libc/machine/bfin/Makefile.in	1970-01-01 01:00:00.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/machine/bfin/Makefile.in	2006-09-09 06:34:24.000000000 +0200
-@@ -0,0 +1,327 @@
-+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-+
-+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-+# This Makefile.in is free software; the Free Software Foundation
-+# gives unlimited permission to copy and/or distribute it,
-+# with or without modifications, as long as this notice is preserved.
-+
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-+# PARTICULAR PURPOSE.
-+
-+
-+SHELL = @SHELL@
-+
-+srcdir = @srcdir@
-+top_srcdir = @top_srcdir@
-+VPATH = @srcdir@
-+prefix = @prefix@
-+exec_prefix = @exec_prefix@
-+
-+bindir = @bindir@
-+sbindir = @sbindir@
-+libexecdir = @libexecdir@
-+datadir = @datadir@
-+sysconfdir = @sysconfdir@
-+sharedstatedir = @sharedstatedir@
-+localstatedir = @localstatedir@
-+libdir = @libdir@
-+infodir = @infodir@
-+mandir = @mandir@
-+includedir = @includedir@
-+oldincludedir = /usr/include
-+
-+DESTDIR =
-+
-+pkgdatadir = $(datadir)/@PACKAGE@
-+pkglibdir = $(libdir)/@PACKAGE@
-+pkgincludedir = $(includedir)/@PACKAGE@
-+
-+top_builddir = .
-+
-+ACLOCAL = @ACLOCAL@
-+AUTOCONF = @AUTOCONF@
-+AUTOMAKE = @AUTOMAKE@
-+AUTOHEADER = @AUTOHEADER@
-+
-+INSTALL = @INSTALL@
-+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-+INSTALL_DATA = @INSTALL_DATA@
-+INSTALL_SCRIPT = @INSTALL_SCRIPT@
-+transform = @program_transform_name@
-+
-+NORMAL_INSTALL = :
-+PRE_INSTALL = :
-+POST_INSTALL = :
-+NORMAL_UNINSTALL = :
-+PRE_UNINSTALL = :
-+POST_UNINSTALL = :
-+build_alias = @build_alias@
-+build_triplet = @build@
-+host_alias = @host_alias@
-+host_triplet = @host@
-+target_alias = @target_alias@
-+target_triplet = @target@
-+AR = @AR@
-+AS = @AS@
-+CC = @CC@
-+CPP = @CPP@
-+EXEEXT = @EXEEXT@
-+LDFLAGS = @LDFLAGS@
-+MAINT = @MAINT@
-+MAKEINFO = @MAKEINFO@
-+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
-+OBJEXT = @OBJEXT@
-+PACKAGE = @PACKAGE@
-+RANLIB = @RANLIB@
-+VERSION = @VERSION@
-+aext = @aext@
-+libm_machine_dir = @libm_machine_dir@
-+machine_dir = @machine_dir@
-+newlib_basedir = @newlib_basedir@
-+oext = @oext@
-+sys_dir = @sys_dir@
-+
-+AUTOMAKE_OPTIONS = cygnus
-+
-+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
-+
-+noinst_LIBRARIES = lib.a
-+
-+lib_a_SOURCES = setjmp.S
-+
-+ACLOCAL_AMFLAGS = -I ../../..
-+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
-+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
-+CONFIG_CLEAN_FILES = 
-+LIBRARIES =  $(noinst_LIBRARIES)
-+
-+
-+DEFS = @DEFS@ -I. -I$(srcdir) 
-+CPPFLAGS = @CPPFLAGS@
-+LIBS = @LIBS@
-+lib_a_LIBADD = 
-+lib_a_OBJECTS =  setjmp.o
-+CFLAGS = @CFLAGS@
-+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-+CCLD = $(CC)
-+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
-+
-+
-+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-+
-+TAR = gtar
-+GZIP_ENV = --best
-+SOURCES = $(lib_a_SOURCES)
-+OBJECTS = $(lib_a_OBJECTS)
-+
-+all: all-redirect
-+.SUFFIXES:
-+.SUFFIXES: .S .c .o .s
-+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-+	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
-+
-+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-+	cd $(top_builddir) \
-+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-+
-+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  \
-+		../../../acinclude.m4 ../../../aclocal.m4 \
-+		../../../libtool.m4
-+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-+
-+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-+	$(SHELL) ./config.status --recheck
-+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-+	cd $(srcdir) && $(AUTOCONF)
-+
-+mostlyclean-noinstLIBRARIES:
-+
-+clean-noinstLIBRARIES:
-+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-+
-+distclean-noinstLIBRARIES:
-+
-+maintainer-clean-noinstLIBRARIES:
-+
-+.c.o:
-+	$(COMPILE) -c $<
-+
-+.s.o:
-+	$(COMPILE) -c $<
-+
-+.S.o:
-+	$(COMPILE) -c $<
-+
-+mostlyclean-compile:
-+	-rm -f *.o core *.core
-+
-+clean-compile:
-+
-+distclean-compile:
-+	-rm -f *.tab.c
-+
-+maintainer-clean-compile:
-+
-+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
-+	-rm -f lib.a
-+	$(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
-+	$(RANLIB) lib.a
-+
-+tags: TAGS
-+
-+ID: $(HEADERS) $(SOURCES) $(LISP)
-+	list='$(SOURCES) $(HEADERS)'; \
-+	unique=`for i in $$list; do echo $$i; done | \
-+	  awk '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	here=`pwd` && cd $(srcdir) \
-+	  && mkid -f$$here/ID $$unique $(LISP)
-+
-+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
-+	tags=; \
-+	here=`pwd`; \
-+	list='$(SOURCES) $(HEADERS)'; \
-+	unique=`for i in $$list; do echo $$i; done | \
-+	  awk '    { files[$$0] = 1; } \
-+	       END { for (i in files) print i; }'`; \
-+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
-+
-+mostlyclean-tags:
-+
-+clean-tags:
-+
-+distclean-tags:
-+	-rm -f TAGS ID
-+
-+maintainer-clean-tags:
-+
-+distdir = $(PACKAGE)-$(VERSION)
-+top_distdir = $(distdir)
-+
-+# This target untars the dist file and tries a VPATH configuration.  Then
-+# it guarantees that the distribution is self-contained by making another
-+# tarfile.
-+distcheck: dist
-+	-rm -rf $(distdir)
-+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-+	mkdir $(distdir)/=build
-+	mkdir $(distdir)/=inst
-+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-+	cd $(distdir)/=build \
-+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-+	  && $(MAKE) $(AM_MAKEFLAGS) \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-+	  && $(MAKE) $(AM_MAKEFLAGS) check \
-+	  && $(MAKE) $(AM_MAKEFLAGS) install \
-+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-+	  && $(MAKE) $(AM_MAKEFLAGS) dist
-+	-rm -rf $(distdir)
-+	@banner="$(distdir).tar.gz is ready for distribution"; \
-+	dashes=`echo "$$banner" | sed s/./=/g`; \
-+	echo "$$dashes"; \
-+	echo "$$banner"; \
-+	echo "$$dashes"
-+dist: distdir
-+	-chmod -R a+r $(distdir)
-+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-+	-rm -rf $(distdir)
-+dist-all: distdir
-+	-chmod -R a+r $(distdir)
-+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-+	-rm -rf $(distdir)
-+distdir: $(DISTFILES)
-+	-rm -rf $(distdir)
-+	mkdir $(distdir)
-+	-chmod 777 $(distdir)
-+	@for file in $(DISTFILES); do \
-+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-+	  if test -d $$d/$$file; then \
-+	    cp -pr $$d/$$file $(distdir)/$$file; \
-+	  else \
-+	    test -f $(distdir)/$$file \
-+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-+	  fi; \
-+	done
-+info-am:
-+info: info-am
-+dvi-am:
-+dvi: dvi-am
-+check-am:
-+check: check-am
-+installcheck-am:
-+installcheck: installcheck-am
-+install-info-am: 
-+install-info: install-info-am
-+install-exec-am:
-+install-exec: install-exec-am
-+
-+install-data-am:
-+install-data: install-data-am
-+
-+install-am: all-am
-+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-+install: install-am
-+uninstall-am:
-+uninstall: uninstall-am
-+all-am: Makefile $(LIBRARIES)
-+all-redirect: all-am
-+install-strip:
-+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-+installdirs:
-+
-+
-+mostlyclean-generic:
-+
-+clean-generic:
-+
-+distclean-generic:
-+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
-+
-+maintainer-clean-generic:
-+mostlyclean-am:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
-+		mostlyclean-tags mostlyclean-generic
-+
-+mostlyclean: mostlyclean-am
-+
-+clean-am:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
-+		mostlyclean-am
-+
-+clean: clean-am
-+
-+distclean-am:  distclean-noinstLIBRARIES distclean-compile \
-+		distclean-tags distclean-generic clean-am
-+
-+distclean: distclean-am
-+	-rm -f config.status
-+
-+maintainer-clean-am:  maintainer-clean-noinstLIBRARIES \
-+		maintainer-clean-compile maintainer-clean-tags \
-+		maintainer-clean-generic distclean-am
-+	@echo "This command is intended for maintainers to use;"
-+	@echo "it deletes files that may require special tools to rebuild."
-+
-+maintainer-clean: maintainer-clean-am
-+	-rm -f config.status
-+
-+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-+mostlyclean-compile distclean-compile clean-compile \
-+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-+clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-+check-am installcheck-am installcheck install-info-am install-info \
-+install-exec-am install-exec install-data-am install-data install-am \
-+install uninstall-am uninstall all-redirect all-am all installdirs \
-+mostlyclean-generic distclean-generic clean-generic \
-+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-+
-+
-+# Tell versions [3.59,3.63) of GNU make to not export all variables.
-+# Otherwise a system limit (for SysV at least) may be exceeded.
-+.NOEXPORT:
-diff -uNr newlib-1.14.0.orig/newlib/libc/machine/bfin/setjmp.S newlib-1.14.0/newlib/libc/machine/bfin/setjmp.S
---- newlib-1.14.0.orig/newlib/libc/machine/bfin/setjmp.S	1970-01-01 01:00:00.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/machine/bfin/setjmp.S	2006-09-09 06:34:24.000000000 +0200
-@@ -0,0 +1,196 @@
-+/* 
-+ * Setjmp/Longjump implementation for the Blackfin Architecture
-+ */
-+#define _ASM
-+#define _SETJMP_H
-+
-+.text
-+.global setjmp
-+.align 4;
-+setjmp:
-+        /*save P0 first*/
-+	[--SP] = P0;
-+        P0 = R0;
-+        [ P0 + 0x00 ] = R0;
-+        [ P0 + 0x04 ] = R1;
-+	[ P0 + 0x08 ] = R2;
-+	[ P0 + 0x0c ] = R3;
-+	[ P0 + 0x10 ] = R4;
-+	[ P0 + 0x14 ] = R5;
-+	[ P0 + 0x18 ] = R6;
-+	[ P0 + 0x1c ] = R7;
-+	[ P0 + 0x24 ] = P1;
-+	/* save the original value of P0 */
-+	P1 = [SP++];
-+	[ P0 + 0x20 ] = P1;
-+	[ P0 + 0x28 ] = P2;
-+	[ P0 + 0x2c ] = P3;
-+	[ P0 + 0x30 ] = P4;
-+	[ P0 + 0x34 ] = P5;
-+	[ P0 + 0x38 ] = FP;	
-+	[ P0 + 0x3c ] = SP;
-+
-+	/* save ASTAT */
-+        R0 = ASTAT;
-+        [P0 + 0x40] = R0;
-+
-+        /* save Loop Counters */
-+        R0 = LC0;
-+        [P0 + 0x44] = R0;
-+        R0 = LC1;
-+        [P0 + 0x48] = R0;
-+
-+        /* save Accumulators */
-+        R0 = A0.W;
-+        [P0 + 0x4C] = R0;
-+        R0 = A0.X;
-+        [P0 + 0x50] = R0;
-+        R0 = A1.W;
-+        [P0 + 0x54] = R0;
-+        R0 = A1.X;
-+        [P0 + 0x58] = R0;
-+
-+        /* save Index Registers */
-+        R0 = I0;
-+        [P0 + 0x5C] = R0;
-+        R0 = I1;
-+        [P0 + 0x60] = R0;
-+        R0 = I2;
-+        [P0 + 0x64] = R0;
-+        R0 = I3;
-+        [P0 + 0x68] = R0;
-+
-+        /* save Modifier Registers */
-+        R0 = M0;
-+        [P0 + 0x6C] = R0;
-+        R0 = M1;
-+        [P0 + 0x70] = R0;
-+        R0 = M2;
-+        [P0 + 0x74] = R0;
-+        R0 = M3;
-+        [P0 + 0x78] = R0;
-+
-+        /* save Length Registers */
-+        R0 = L0;
-+        [P0 + 0x7c] = R0;
-+        R0 = L1;
-+        [P0 + 0x80] = R0;
-+        R0 = L2;
-+        [P0 + 0x84] = R0;
-+        R0 = L3;
-+        [P0 + 0x88] = R0;
-+
-+        /* Base Registers */
-+        R0 = B0;
-+        [P0 + 0x8C] = R0;
-+        R0 = B1;
-+        [P0 + 0x90] = R0;
-+        R0 = B2;
-+        [P0 + 0x94] = R0;
-+        R0 = B3;
-+        [P0 + 0x98] = R0;
-+
-+        R0 = RETS;
-+        [P0 + 0x9C] = R0;
-+
-+	/* return 0 in R0 */
-+        R0 = 0x00;
-+        RTS;
-+
-+
-+.global longjmp
-+longjmp:
-+        /*setup P0*/
-+	P0 = R0;
-+        R2 = [ P0 + 0x08 ];
-+        R3 = [ P0 + 0x0c ];
-+        R4 = [ P0 + 0x10 ];
-+        R5 = [ P0 + 0x14 ];
-+        R6 = [ P0 + 0x18 ];
-+        R7 = [ P0 + 0x1c ];
-+        P1 = [ P0 + 0x24 ];
-+        P2 = [ P0 + 0x28 ];
-+        P3 = [ P0 + 0x2c ];
-+        P4 = [ P0 + 0x30 ];
-+        P5 = [ P0 + 0x34 ];
-+        FP = [ P0 + 0x38 ];
-+        SP = [ P0 + 0x3c ];
-+
-+        /* restore ASTAT */
-+        R0 = [P0 + 0x40];
-+        ASTAT = R0;
-+
-+        /* restore Loop Counters */
-+        R0 = [P0 + 0x44];
-+        LC0 = R0;
-+        R0 = [P0 + 0x48];
-+        LC1 = R0;
-+
-+        /* restore Accumulators */
-+        R0 = [P0 + 0x4C];
-+        A0.W = R0;
-+        R0 = [P0 + 0x50];
-+        A0.X = R0;
-+        R0 = [P0 + 0x54];
-+        A1.W = R0;
-+        R0 = [P0 + 0x58];
-+        A1.X = R0;
-+
-+        /* restore Index Registers */
-+        R0 = [P0 + 0x5C];
-+        I0 = R0;
-+        R0 = [P0 + 0x60];
-+        I1 = R0;
-+        R0 = [P0 + 0x64];
-+        I2 = R0;
-+        R0 = [P0 + 0x68];
-+        I3 = R0;
-+
-+        /* restore Modifier Registers */
-+        R0 = [P0 + 0x6C];
-+        M0 = R0;
-+        R0 = [P0 + 0x70];
-+        M1 = R0;
-+        R0 = [P0 + 0x74];
-+        M2 = R0;
-+        R0 = [P0 + 0x78];
-+        M3 = R0;
-+
-+        /* restore Length Registers */
-+        R0 = [P0 + 0x7c];
-+        L0 = R0;
-+        R0 = [P0 + 0x80];
-+        L1 = R0;
-+        R0 = [P0 + 0x84];
-+        L2 = R0;
-+        R0 = [P0 + 0x88];
-+        L3 = R0;
-+
-+        /* restore Base Registers */
-+        R0 = [P0 + 0x8C];
-+        B0 = R0;
-+        R0 = [P0 + 0x90];
-+        B1 = R0;
-+        R0 = [P0 + 0x94];
-+        B2 = R0;
-+        R0 = [P0 + 0x98];
-+        B3 = R0;
-+
-+        R0 = [P0 + 0x9C];
-+        RETS = R0;
-+
-+
-+   
-+	/* return orig R1 should be non zero */ 
-+	CC = R1 == 0x0;
-+	IF CC JUMP return1;
-+	R0 = R1;
-+	JUMP finished
-+return1:
-+	R0 = 0x1;
-+jmpfinished:
-+	/* restore R1 and P0 */
-+	R1 = [P0 + 0x04]
-+	P0 = [P0 + 0x20]
-+        rts;
-+
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/db_local.h newlib-1.14.0/newlib/libc/search/db_local.h
---- newlib-1.14.0.orig/newlib/libc/search/db_local.h	2002-06-25 01:05:08.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/db_local.h	2006-09-09 06:34:24.000000000 +0200
-@@ -50,7 +50,7 @@
- #define	MAX_PAGE_NUMBER	0xffffffff	/* >= # of pages in a file */
- typedef __uint32_t	pgno_t;
- #define	MAX_PAGE_OFFSET	65535		/* >= # of bytes in a page */
--typedef __uint16_t	indx_t;
-+typedef __uint_least16_t	indx_t;
- #define	MAX_REC_NUMBER	0xffffffff	/* >= # of records in a tree */
- typedef __uint32_t	recno_t;
- 
-@@ -191,12 +191,12 @@
-  *	P_16_COPY	swap from one location to another
-  */
- #define	M_16_SWAP(a) {							\
--	__uint16_t _tmp = a;						\
-+	__uint_least16_t _tmp = a;						\
- 	((char *)&a)[0] = ((char *)&_tmp)[1];				\
- 	((char *)&a)[1] = ((char *)&_tmp)[0];				\
- }
- #define	P_16_SWAP(a) {							\
--	__uint16_t _tmp = *(__uint16_t *)a;				\
-+	__uint_least16_t _tmp = *(__uint_least16_t *)a;				\
- 	((char *)a)[0] = ((char *)&_tmp)[1];				\
- 	((char *)a)[1] = ((char *)&_tmp)[0];				\
- }
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/extern.h newlib-1.14.0/newlib/libc/search/extern.h
---- newlib-1.14.0.orig/newlib/libc/search/extern.h	2002-06-20 21:51:31.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/extern.h	2006-09-09 06:34:24.000000000 +0200
-@@ -48,7 +48,7 @@
- int	 __delpair(HTAB *, BUFHEAD *, int);
- int	 __expand_table(HTAB *);
- int	 __find_bigpair(HTAB *, BUFHEAD *, int, char *, int);
--__uint16_t	 __find_last_page(HTAB *, BUFHEAD **);
-+__uint_least16_t	 __find_last_page(HTAB *, BUFHEAD **);
- void	 __free_ovflpage(HTAB *, BUFHEAD *);
- BUFHEAD	*__get_buf(HTAB *, __uint32_t, BUFHEAD *, int);
- int	 __get_page(HTAB *, char *, __uint32_t, int, int, int);
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/hash_bigkey.c newlib-1.14.0/newlib/libc/search/hash_bigkey.c
---- newlib-1.14.0.orig/newlib/libc/search/hash_bigkey.c	2002-06-25 01:05:08.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/hash_bigkey.c	2006-09-09 06:34:24.000000000 +0200
-@@ -96,13 +96,13 @@
- 	BUFHEAD *bufp;
- 	const DBT *key, *val;
- {
--	__uint16_t *p;
-+	__uint_least16_t *p;
- 	int key_size, n, val_size;
--	__uint16_t space, move_bytes, off;
-+	__uint_least16_t space, move_bytes, off;
- 	char *cp, *key_data, *val_data;
- 
- 	cp = bufp->page;		/* Character pointer of p. */
--	p = (__uint16_t *)cp;
-+	p = (__uint_least16_t *)cp;
- 
- 	key_data = (char *)key->data;
- 	key_size = key->size;
-@@ -140,7 +140,7 @@
- 				OFFSET(p) = off;
- 			} else
- 				p[n - 2] = FULL_KEY;
--		p = (__uint16_t *)bufp->page;
-+		p = (__uint_least16_t *)bufp->page;
- 		cp = bufp->page;
- 		bufp->flags |= BUF_MOD;
- 	}
-@@ -170,7 +170,7 @@
- 			if (!bufp)
- 				return (-1);
- 			cp = bufp->page;
--			p = (__uint16_t *)cp;
-+			p = (__uint_least16_t *)cp;
- 		} else
- 			p[n] = FULL_KEY_DATA;
- 		bufp->flags |= BUF_MOD;
-@@ -195,12 +195,12 @@
- 	BUFHEAD *bufp;
- {
- 	BUFHEAD *last_bfp, *rbufp;
--	__uint16_t *bp, pageno;
-+	__uint_least16_t *bp, pageno;
- 	int key_done, n;
- 
- 	rbufp = bufp;
- 	last_bfp = NULL;
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	pageno = 0;
- 	key_done = 0;
- 
-@@ -223,7 +223,7 @@
- 		last_bfp = rbufp;
- 		if (!rbufp)
- 			return (-1);		/* Error. */
--		bp = (__uint16_t *)rbufp->page;
-+		bp = (__uint_least16_t *)rbufp->page;
- 	}
- 
- 	/*
-@@ -238,7 +238,7 @@
- 	pageno = bp[n - 1];
- 
- 	/* Now, bp is the first page of the pair. */
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	if (n > 2) {
- 		/* There is an overflow page. */
- 		bp[1] = pageno;
-@@ -276,13 +276,13 @@
- 	char *key;
- 	int size;
- {
--	__uint16_t *bp;
-+	__uint_least16_t *bp;
- 	char *p;
- 	int ksize;
--	__uint16_t bytes;
-+	__uint_least16_t bytes;
- 	char *kkey;
- 
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	p = bufp->page;
- 	ksize = size;
- 	kkey = key;
-@@ -298,7 +298,7 @@
- 		if (!bufp)
- 			return (-3);
- 		p = bufp->page;
--		bp = (__uint16_t *)p;
-+		bp = (__uint_least16_t *)p;
- 		ndx = 1;
- 	}
- 
-@@ -320,17 +320,17 @@
-  * of the pair; 0 if there isn't any (i.e. big pair is the last key in the
-  * bucket)
-  */
--extern __uint16_t
-+extern __uint_least16_t
- __find_last_page(hashp, bpp)
- 	HTAB *hashp;
- 	BUFHEAD **bpp;
- {
- 	BUFHEAD *bufp;
--	__uint16_t *bp, pageno;
-+	__uint_least16_t *bp, pageno;
- 	int n;
- 
- 	bufp = *bpp;
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	for (;;) {
- 		n = bp[0];
- 
-@@ -347,7 +347,7 @@
- 		bufp = __get_buf(hashp, pageno, bufp, 0);
- 		if (!bufp)
- 			return (0);	/* Need to indicate an error! */
--		bp = (__uint16_t *)bufp->page;
-+		bp = (__uint_least16_t *)bufp->page;
- 	}
- 
- 	*bpp = bufp;
-@@ -370,15 +370,15 @@
- 	int set_current;
- {
- 	BUFHEAD *save_p;
--	__uint16_t *bp, len, off, save_addr;
-+	__uint_least16_t *bp, len, off, save_addr;
- 	char *tp;
- 
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	while (bp[ndx + 1] == PARTIAL_KEY) {
- 		bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
- 		if (!bufp)
- 			return (-1);
--		bp = (__uint16_t *)bufp->page;
-+		bp = (__uint_least16_t *)bufp->page;
- 		ndx = 1;
- 	}
- 
-@@ -386,7 +386,7 @@
- 		bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
- 		if (!bufp)
- 			return (-1);
--		bp = (__uint16_t *)bufp->page;
-+		bp = (__uint_least16_t *)bufp->page;
- 		save_p = bufp;
- 		save_addr = save_p->addr;
- 		off = bp[1];
-@@ -407,7 +407,7 @@
- 			bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
- 			if (!bufp)
- 				return (-1);
--			bp = (__uint16_t *)bufp->page;
-+			bp = (__uint_least16_t *)bufp->page;
- 		} else {
- 			/* The data is all on one page. */
- 			tp = (char *)bp;
-@@ -426,7 +426,7 @@
- 					if (!hashp->cpage)
- 						return (-1);
- 					hashp->cndx = 1;
--					if (!((__uint16_t *)
-+					if (!((__uint_least16_t *)
- 					    hashp->cpage->page)[0]) {
- 						hashp->cbucket++;
- 						hashp->cpage = NULL;
-@@ -458,14 +458,14 @@
- 	BUFHEAD *bufp;
- 	int len, set;
- {
--	__uint16_t *bp;
-+	__uint_least16_t *bp;
- 	char *p;
- 	BUFHEAD *xbp;
--	__uint16_t save_addr;
-+	__uint_least16_t save_addr;
- 	int mylen, totlen;
- 
- 	p = bufp->page;
--	bp = (__uint16_t *)p;
-+	bp = (__uint_least16_t *)p;
- 	mylen = hashp->BSIZE - bp[1];
- 	save_addr = bufp->addr;
- 
-@@ -485,7 +485,7 @@
- 				    __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
- 				if (!hashp->cpage)
- 					return (-1);
--				else if (!((__uint16_t *)hashp->cpage->page)[0]) {
-+				else if (!((__uint_least16_t *)hashp->cpage->page)[0]) {
- 					hashp->cbucket++;
- 					hashp->cpage = NULL;
- 				}
-@@ -537,10 +537,10 @@
- 	BUFHEAD *xbp;
- 	char *p;
- 	int mylen, totlen;
--	__uint16_t *bp, save_addr;
-+	__uint_least16_t *bp, save_addr;
- 
- 	p = bufp->page;
--	bp = (__uint16_t *)p;
-+	bp = (__uint_least16_t *)p;
- 	mylen = hashp->BSIZE - bp[1];
- 
- 	save_addr = bufp->addr;
-@@ -583,11 +583,11 @@
- 	SPLIT_RETURN *ret;
- {
- 	BUFHEAD *tmpp;
--	__uint16_t *tp;
-+	__uint_least16_t *tp;
- 	BUFHEAD *bp;
- 	DBT key, val;
- 	__uint32_t change;
--	__uint16_t free_space, n, off;
-+	__uint_least16_t free_space, n, off;
- 
- 	bp = big_keyp;
- 
-@@ -619,14 +619,14 @@
- 	    (tmpp->ovfl ? tmpp->ovfl->addr : 0), (bp ? bp->addr : 0));
- #endif
- 	tmpp->ovfl = bp;	/* one of op/np point to big_keyp */
--	tp = (__uint16_t *)tmpp->page;
-+	tp = (__uint_least16_t *)tmpp->page;
- #ifdef DEBUG
- 	assert(FREESPACE(tp) >= OVFLSIZE);
- #endif
- 	n = tp[0];
- 	off = OFFSET(tp);
- 	free_space = FREESPACE(tp);
--	tp[++n] = (__uint16_t)addr;
-+	tp[++n] = (__uint_least16_t)addr;
- 	tp[++n] = OVFLPAGE;
- 	tp[0] = n;
- 	OFFSET(tp) = off;
-@@ -642,7 +642,7 @@
- 	ret->newp = np;
- 	ret->oldp = op;
- 
--	tp = (__uint16_t *)big_keyp->page;
-+	tp = (__uint_least16_t *)big_keyp->page;
- 	big_keyp->flags |= BUF_MOD;
- 	if (tp[0] > 2) {
- 		/*
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/hash_buf.c newlib-1.14.0/newlib/libc/search/hash_buf.c
---- newlib-1.14.0.orig/newlib/libc/search/hash_buf.c	2004-05-26 19:57:10.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/hash_buf.c	2006-09-09 06:34:24.000000000 +0200
-@@ -176,7 +176,7 @@
- 	BUFHEAD *next_xbp;
- 	SEGMENT segp;
- 	int segment_ndx;
--	__uint16_t oaddr, *shortp;
-+	__uint_least16_t oaddr, *shortp;
- 
- 	oaddr = 0;
- 	bp = LRU;
-@@ -212,7 +212,7 @@
- 			 * Set oaddr before __put_page so that you get it
- 			 * before bytes are swapped.
- 			 */
--			shortp = (__uint16_t *)bp->page;
-+			shortp = (__uint_least16_t *)bp->page;
- 			if (shortp[0])
- 				oaddr = shortp[shortp[0] - 1];
- 			if ((bp->flags & BUF_MOD) && __put_page(hashp, bp->page,
-@@ -255,7 +255,7 @@
- 				    (oaddr != xbp->addr))
- 					break;
- 
--				shortp = (__uint16_t *)xbp->page;
-+				shortp = (__uint_least16_t *)xbp->page;
- 				if (shortp[0])
- 					/* set before __put_page */
- 					oaddr = shortp[shortp[0] - 1];
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/hash.c newlib-1.14.0/newlib/libc/search/hash.c
---- newlib-1.14.0.orig/newlib/libc/search/hash.c	2004-05-26 19:57:10.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/hash.c	2006-09-09 06:34:24.000000000 +0200
-@@ -628,10 +628,10 @@
- {
- 	BUFHEAD *rbufp;
- 	BUFHEAD *bufp, *save_bufp;
--	__uint16_t *bp;
-+	__uint_least16_t *bp;
- 	int n, ndx, off, size;
- 	char *kp;
--	__uint16_t pageno;
-+	__uint_least16_t pageno;
- 
- #ifdef HASH_STATISTICS
- 	hash_accesses++;
-@@ -647,7 +647,7 @@
- 
- 	/* Pin the bucket chain */
- 	rbufp->flags |= BUF_PIN;
--	for (bp = (__uint16_t *)rbufp->page, n = *bp++, ndx = 1; ndx < n;)
-+	for (bp = (__uint_least16_t *)rbufp->page, n = *bp++, ndx = 1; ndx < n;)
- 		if (bp[1] >= REAL_KEY) {
- 			/* Real key/data pair */
- 			if (size == off - *bp &&
-@@ -666,7 +666,7 @@
- 				return (ERROR);
- 			}
- 			/* FOR LOOP INIT */
--			bp = (__uint16_t *)rbufp->page;
-+			bp = (__uint_least16_t *)rbufp->page;
- 			n = *bp++;
- 			ndx = 1;
- 			off = hashp->BSIZE;
-@@ -688,7 +688,7 @@
- 					return (ERROR);
- 				}
- 				/* FOR LOOP INIT */
--				bp = (__uint16_t *)rbufp->page;
-+				bp = (__uint_least16_t *)rbufp->page;
- 				n = *bp++;
- 				ndx = 1;
- 				off = hashp->BSIZE;
-@@ -722,7 +722,7 @@
- 		save_bufp->flags &= ~BUF_PIN;
- 		return (ABNORMAL);
- 	case HASH_GET:
--		bp = (__uint16_t *)rbufp->page;
-+		bp = (__uint_least16_t *)rbufp->page;
- 		if (bp[ndx + 1] < REAL_KEY) {
- 			if (__big_return(hashp, rbufp, ndx, val, 0))
- 				return (ERROR);
-@@ -758,7 +758,7 @@
- 	__uint32_t bucket;
- 	BUFHEAD *bufp;
- 	HTAB *hashp;
--	__uint16_t *bp, ndx;
-+	__uint_least16_t *bp, ndx;
- 
- 	hashp = (HTAB *)dbp->internal;
- 	if (flag && flag != R_FIRST && flag != R_NEXT) {
-@@ -783,7 +783,7 @@
- 				if (!bufp)
- 					return (ERROR);
- 				hashp->cpage = bufp;
--				bp = (__uint16_t *)bufp->page;
-+				bp = (__uint_least16_t *)bufp->page;
- 				if (bp[0])
- 					break;
- 			}
-@@ -793,7 +793,7 @@
- 				return (ABNORMAL);
- 			}
- 		} else
--			bp = (__uint16_t *)hashp->cpage->page;
-+			bp = (__uint_least16_t *)hashp->cpage->page;
- 
- #ifdef DEBUG
- 		assert(bp);
-@@ -804,7 +804,7 @@
- 			    __get_buf(hashp, bp[hashp->cndx], bufp, 0);
- 			if (!bufp)
- 				return (ERROR);
--			bp = (__uint16_t *)(bufp->page);
-+			bp = (__uint_least16_t *)(bufp->page);
- 			hashp->cndx = 1;
- 		}
- 		if (!bp[0]) {
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/hash.h newlib-1.14.0/newlib/libc/search/hash.h
---- newlib-1.14.0.orig/newlib/libc/search/hash.h	2002-07-02 20:18:58.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/hash.h	2006-09-09 06:34:24.000000000 +0200
-@@ -102,7 +102,7 @@
- #define NCACHED	32			/* number of bit maps and spare 
- 					 * points */
- 	int		spares[NCACHED];/* spare pages for overflow */
--	__uint16_t	bitmaps[NCACHED];	/* address of overflow page 
-+	__uint_least16_t	bitmaps[NCACHED];	/* address of overflow page 
- 						 * bitmaps */
- } HASHHDR;
- 
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/hash_page.c newlib-1.14.0/newlib/libc/search/hash_page.c
---- newlib-1.14.0.orig/newlib/libc/search/hash_page.c	2002-09-19 23:28:51.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/hash_page.c	2006-09-09 06:34:24.000000000 +0200
-@@ -77,16 +77,16 @@
- static __uint32_t	*fetch_bitmap(HTAB *, int);
- static __uint32_t	 first_free(__uint32_t);
- static int	 open_temp(HTAB *);
--static __uint16_t	 overflow_page(HTAB *);
-+static __uint_least16_t	 overflow_page(HTAB *);
- static void	 putpair(char *, const DBT *, const DBT *);
--static void	 squeeze_key(__uint16_t *, const DBT *, const DBT *);
-+static void	 squeeze_key(__uint_least16_t *, const DBT *, const DBT *);
- static int	 ugly_split
- (HTAB *, __uint32_t, BUFHEAD *, BUFHEAD *, int, int);
- 
- #define	PAGE_INIT(P) { \
--	((__uint16_t *)(P))[0] = 0; \
--	((__uint16_t *)(P))[1] = hashp->BSIZE - 3 * sizeof(__uint16_t); \
--	((__uint16_t *)(P))[2] = hashp->BSIZE; \
-+	((__uint_least16_t *)(P))[0] = 0; \
-+	((__uint_least16_t *)(P))[1] = hashp->BSIZE - 3 * sizeof(__uint_least16_t); \
-+	((__uint_least16_t *)(P))[2] = hashp->BSIZE; \
- }
- 
- /*
-@@ -99,9 +99,9 @@
- 	char *p;
- 	const DBT *key, *val;
- {
--	__uint16_t *bp, n, off;
-+	__uint_least16_t *bp, n, off;
- 
--	bp = (__uint16_t *)p;
-+	bp = (__uint_least16_t *)p;
- 
- 	/* Enter the key first. */
- 	n = bp[0];
-@@ -117,7 +117,7 @@
- 
- 	/* Adjust page info. */
- 	bp[0] = n;
--	bp[n + 1] = off - ((n + 3) * sizeof(__uint16_t));
-+	bp[n + 1] = off - ((n + 3) * sizeof(__uint_least16_t));
- 	bp[n + 2] = off;
- }
- 
-@@ -132,11 +132,11 @@
- 	BUFHEAD *bufp;
- 	int ndx;
- {
--	__uint16_t *bp, newoff;
-+	__uint_least16_t *bp, newoff;
- 	int n;
--	__uint16_t pairlen;
-+	__uint_least16_t pairlen;
- 
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	n = bp[0];
- 
- 	if (bp[ndx + 1] < REAL_KEY)
-@@ -167,7 +167,7 @@
- 	}
- 	/* Finally adjust the page data */
- 	bp[n] = OFFSET(bp) + pairlen;
--	bp[n - 1] = bp[n + 1] + pairlen + 2 * sizeof(__uint16_t);
-+	bp[n - 1] = bp[n + 1] + pairlen + 2 * sizeof(__uint_least16_t);
- 	bp[0] = n - 2;
- 	hashp->NKEYS--;
- 
-@@ -185,15 +185,15 @@
- 	__uint32_t obucket, nbucket;
- {
- 	BUFHEAD *new_bufp, *old_bufp;
--	__uint16_t *ino;
-+	__uint_least16_t *ino;
- 	char *np;
- 	DBT key, val;
- 	int n, ndx, retval;
--	__uint16_t copyto, diff, off, moved;
-+	__uint_least16_t copyto, diff, off, moved;
- 	char *op;
- 
--	copyto = (__uint16_t)hashp->BSIZE;
--	off = (__uint16_t)hashp->BSIZE;
-+	copyto = (__uint_least16_t)hashp->BSIZE;
-+	off = (__uint_least16_t)hashp->BSIZE;
- 	old_bufp = __get_buf(hashp, obucket, NULL, 0);
- 	if (old_bufp == NULL)
- 		return (-1);
-@@ -204,7 +204,7 @@
- 	old_bufp->flags |= (BUF_MOD | BUF_PIN);
- 	new_bufp->flags |= (BUF_MOD | BUF_PIN);
- 
--	ino = (__uint16_t *)(op = old_bufp->page);
-+	ino = (__uint_least16_t *)(op = old_bufp->page);
- 	np = new_bufp->page;
- 
- 	moved = 0;
-@@ -246,13 +246,13 @@
- 
- 	/* Now clean up the page */
- 	ino[0] -= moved;
--	FREESPACE(ino) = copyto - sizeof(__uint16_t) * (ino[0] + 3);
-+	FREESPACE(ino) = copyto - sizeof(__uint_least16_t) * (ino[0] + 3);
- 	OFFSET(ino) = copyto;
- 
- #ifdef DEBUG3
- 	(void)fprintf(stderr, "split %d/%d\n",
--	    ((__uint16_t *)np)[0] / 2,
--	    ((__uint16_t *)op)[0] / 2);
-+	    ((__uint_least16_t *)np)[0] / 2,
-+	    ((__uint_least16_t *)op)[0] / 2);
- #endif
- 	/* unpin both pages */
- 	old_bufp->flags &= ~BUF_PIN;
-@@ -284,22 +284,22 @@
- 	int moved;		/* Number of pairs moved to new page. */
- {
- 	BUFHEAD *bufp;		/* Buffer header for ino */
--	__uint16_t *ino;		/* Page keys come off of */
--	__uint16_t *np;		/* New page */
--	__uint16_t *op;		/* Page keys go on to if they aren't moving */
-+	__uint_least16_t *ino;		/* Page keys come off of */
-+	__uint_least16_t *np;		/* New page */
-+	__uint_least16_t *op;		/* Page keys go on to if they aren't moving */
- 
- 	BUFHEAD *last_bfp;	/* Last buf header OVFL needing to be freed */
- 	DBT key, val;
- 	SPLIT_RETURN ret;
--	__uint16_t n, off, ov_addr, scopyto;
-+	__uint_least16_t n, off, ov_addr, scopyto;
- 	char *cino;		/* Character value of ino */
- 
- 	bufp = old_bufp;
--	ino = (__uint16_t *)old_bufp->page;
--	np = (__uint16_t *)new_bufp->page;
--	op = (__uint16_t *)old_bufp->page;
-+	ino = (__uint_least16_t *)old_bufp->page;
-+	np = (__uint_least16_t *)new_bufp->page;
-+	op = (__uint_least16_t *)old_bufp->page;
- 	last_bfp = NULL;
--	scopyto = (__uint16_t)copyto;	/* ANSI */
-+	scopyto = (__uint_least16_t)copyto;	/* ANSI */
- 
- 	n = ino[0] - 1;
- 	while (n < ino[0]) {
-@@ -310,16 +310,16 @@
- 			old_bufp = ret.oldp;
- 			if (!old_bufp)
- 				return (-1);
--			op = (__uint16_t *)old_bufp->page;
-+			op = (__uint_least16_t *)old_bufp->page;
- 			new_bufp = ret.newp;
- 			if (!new_bufp)
- 				return (-1);
--			np = (__uint16_t *)new_bufp->page;
-+			np = (__uint_least16_t *)new_bufp->page;
- 			bufp = ret.nextp;
- 			if (!bufp)
- 				return (0);
- 			cino = (char *)bufp->page;
--			ino = (__uint16_t *)cino;
-+			ino = (__uint_least16_t *)cino;
- 			last_bfp = ret.nextp;
- 		} else if (ino[n + 1] == OVFLPAGE) {
- 			ov_addr = ino[n];
-@@ -329,14 +329,14 @@
- 			 */
- 			ino[0] -= (moved + 2);
- 			FREESPACE(ino) =
--			    scopyto - sizeof(__uint16_t) * (ino[0] + 3);
-+			    scopyto - sizeof(__uint_least16_t) * (ino[0] + 3);
- 			OFFSET(ino) = scopyto;
- 
- 			bufp = __get_buf(hashp, ov_addr, bufp, 0);
- 			if (!bufp)
- 				return (-1);
- 
--			ino = (__uint16_t *)bufp->page;
-+			ino = (__uint_least16_t *)bufp->page;
- 			n = 1;
- 			scopyto = hashp->BSIZE;
- 			moved = 0;
-@@ -364,7 +364,7 @@
- 					    __add_ovflpage(hashp, old_bufp);
- 					if (!old_bufp)
- 						return (-1);
--					op = (__uint16_t *)old_bufp->page;
-+					op = (__uint_least16_t *)old_bufp->page;
- 					putpair((char *)op, &key, &val);
- 				}
- 				old_bufp->flags |= BUF_MOD;
-@@ -377,7 +377,7 @@
- 					    __add_ovflpage(hashp, new_bufp);
- 					if (!new_bufp)
- 						return (-1);
--					np = (__uint16_t *)new_bufp->page;
-+					np = (__uint_least16_t *)new_bufp->page;
- 					putpair((char *)np, &key, &val);
- 				}
- 				new_bufp->flags |= BUF_MOD;
-@@ -402,10 +402,10 @@
- 	BUFHEAD *bufp;
- 	const DBT *key, *val;
- {
--	__uint16_t *bp, *sop;
-+	__uint_least16_t *bp, *sop;
- 	int do_expand;
- 
--	bp = (__uint16_t *)bufp->page;
-+	bp = (__uint_least16_t *)bufp->page;
- 	do_expand = 0;
- 	while (bp[0] && (bp[2] < REAL_KEY || bp[bp[0]] < REAL_KEY))
- 		/* Exception case */
-@@ -417,7 +417,7 @@
- 			bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
- 			if (!bufp)
- 				return (-1);
--			bp = (__uint16_t *)bufp->page;
-+			bp = (__uint_least16_t *)bufp->page;
- 		} else
- 			/* Try to squeeze key on this page */
- 			if (FREESPACE(bp) > PAIRSIZE(key, val)) {
-@@ -427,7 +427,7 @@
- 				bufp = __get_buf(hashp, bp[bp[0] - 1], bufp, 0);
- 				if (!bufp)
- 					return (-1);
--				bp = (__uint16_t *)bufp->page;
-+				bp = (__uint_least16_t *)bufp->page;
- 			}
- 
- 	if (PAIRFITS(bp, key, val))
-@@ -437,7 +437,7 @@
- 		bufp = __add_ovflpage(hashp, bufp);
- 		if (!bufp)
- 			return (-1);
--		sop = (__uint16_t *)bufp->page;
-+		sop = (__uint_least16_t *)bufp->page;
- 
- 		if (PAIRFITS(sop, key, val))
- 			putpair((char *)sop, key, val);
-@@ -468,12 +468,12 @@
- 	HTAB *hashp;
- 	BUFHEAD *bufp;
- {
--	__uint16_t *sp;
--	__uint16_t ndx, ovfl_num;
-+	__uint_least16_t *sp;
-+	__uint_least16_t ndx, ovfl_num;
- #ifdef DEBUG1
- 	int tmp1, tmp2;
- #endif
--	sp = (__uint16_t *)bufp->page;
-+	sp = (__uint_least16_t *)bufp->page;
- 
- 	/* Check if we are dynamically determining the fill factor */
- 	if (hashp->FFACTOR == DEF_FFACTOR) {
-@@ -525,7 +525,7 @@
- {
- 	int fd, page, size;
- 	int rsize;
--	__uint16_t *bp;
-+	__uint_least16_t *bp;
- 
- 	fd = hashp->fp;
- 	size = hashp->BSIZE;
-@@ -541,7 +541,7 @@
- 	if ((lseek(fd, (off_t)page << hashp->BSHIFT, SEEK_SET) == -1) ||
- 	    ((rsize = read(fd, p, size)) == -1))
- 		return (-1);
--	bp = (__uint16_t *)p;
-+	bp = (__uint_least16_t *)p;
- 	if (!rsize)
- 		bp[0] = 0;	/* We hit the EOF, so initialize a new page */
- 	else
-@@ -600,9 +600,9 @@
- 			for (i = 0; i < max; i++)
- 				M_32_SWAP(((int *)p)[i]);
- 		} else {
--			max = ((__uint16_t *)p)[0] + 2;
-+			max = ((__uint_least16_t *)p)[0] + 2;
- 			for (i = 0; i <= max; i++)
--				M_16_SWAP(((__uint16_t *)p)[i]);
-+				M_16_SWAP(((__uint_least16_t *)p)[i]);
- 		}
- 	}
- 	if (is_bucket)
-@@ -643,7 +643,7 @@
- 	    hashp->BSIZE - clearbytes);
- 	ip[clearints - 1] = ALL_SET << (nbits & BYTE_MASK);
- 	SETBIT(ip, 0);
--	hashp->BITMAPS[ndx] = (__uint16_t)pnum;
-+	hashp->BITMAPS[ndx] = (__uint_least16_t)pnum;
- 	hashp->mapp[ndx] = ip;
- 	return (0);
- }
-@@ -663,13 +663,13 @@
- 	return (i);
- }
- 
--static __uint16_t
-+static __uint_least16_t
- overflow_page(hashp)
- 	HTAB *hashp;
- {
- 	__uint32_t *freep;
- 	int max_free, offset, splitnum;
--	__uint16_t addr;
-+	__uint_least16_t addr;
- 	int bit, first_page, free_bit, free_page, i, in_use_bits, j;
- #ifdef DEBUG2
- 	int tmp1, tmp2;
-@@ -816,16 +816,16 @@
- 	HTAB *hashp;
- 	BUFHEAD *obufp;
- {
--	__uint16_t addr;
-+	__uint_least16_t addr;
- 	__uint32_t *freep;
- 	int bit_address, free_page, free_bit;
--	__uint16_t ndx;
-+	__uint_least16_t ndx;
- 
- 	addr = obufp->addr;
- #ifdef DEBUG1
- 	(void)fprintf(stderr, "Freeing %d\n", addr);
- #endif
--	ndx = (((__uint16_t)addr) >> SPLITSHIFT);
-+	ndx = (((__uint_least16_t)addr) >> SPLITSHIFT);
- 	bit_address =
- 	    (ndx ? hashp->SPARES[ndx - 1] : 0) + (addr & SPLITMASK) - 1;
- 	 if (bit_address < hashp->LAST_FREED)
-@@ -883,11 +883,11 @@
-  */
- static void
- squeeze_key(sp, key, val)
--	__uint16_t *sp;
-+	__uint_least16_t *sp;
- 	const DBT *key, *val;
- {
- 	char *p;
--	__uint16_t free_space, n, off, pageno;
-+	__uint_least16_t free_space, n, off, pageno;
- 
- 	p = (char *)sp;
- 	n = sp[0];
-diff -uNr newlib-1.14.0.orig/newlib/libc/search/page.h newlib-1.14.0/newlib/libc/search/page.h
---- newlib-1.14.0.orig/newlib/libc/search/page.h	2002-06-20 21:51:31.000000000 +0200
-+++ newlib-1.14.0/newlib/libc/search/page.h	2006-09-09 06:34:24.000000000 +0200
-@@ -74,20 +74,20 @@
-  * You might as well do this up front.
-  */
- 
--#define	PAIRSIZE(K,D)	(2*sizeof(__uint16_t) + (K)->size + (D)->size)
--#define BIGOVERHEAD	(4*sizeof(__uint16_t))
--#define KEYSIZE(K)	(4*sizeof(__uint16_t) + (K)->size);
--#define OVFLSIZE	(2*sizeof(__uint16_t))
-+#define	PAIRSIZE(K,D)	(2*sizeof(__uint_least16_t) + (K)->size + (D)->size)
-+#define BIGOVERHEAD	(4*sizeof(__uint_least16_t))
-+#define KEYSIZE(K)	(4*sizeof(__uint_least16_t) + (K)->size);
-+#define OVFLSIZE	(2*sizeof(__uint_least16_t))
- #define FREESPACE(P)	((P)[(P)[0]+1])
- #define	OFFSET(P)	((P)[(P)[0]+2])
- #define PAIRFITS(P,K,D) \
- 	(((P)[2] >= REAL_KEY) && \
- 	    (PAIRSIZE((K),(D)) + OVFLSIZE) <= FREESPACE((P)))
--#define PAGE_META(N)	(((N)+3) * sizeof(__uint16_t))
-+#define PAGE_META(N)	(((N)+3) * sizeof(__uint_least16_t))
- 
- typedef struct {
- 	BUFHEAD *newp;
- 	BUFHEAD *oldp;
- 	BUFHEAD *nextp;
--	__uint16_t next_addr;
-+	__uint_least16_t next_addr;
- }       SPLIT_RETURN;
-diff -uNr newlib-1.14.0.orig/newlib/libc/sys/rtems/machine/param.h newlib-1.14.0/newlib/libc/sys/rtems/machine/param.h
---- newlib-1.14.0.orig/newlib/libc/sys/rtems/machine/param.h	2002-11-07 20:27:36.000000000 +0100
-+++ newlib-1.14.0/newlib/libc/sys/rtems/machine/param.h	2006-09-09 06:36:44.000000000 +0200
-@@ -34,8 +34,13 @@
- #define DEV_BSHIFT	9		/* log2(DEV_BSIZE) */
- #define DEV_BSIZE	(1<<DEV_BSHIFT)
- 
-+#if defined(__AVR__) || defined(__h8300__)
-+#define BLKDEV_IOSIZE	1024
-+#define MAXPHYS		(1 * 1024)	/* max raw I/O transfer size */
-+#else
- #define BLKDEV_IOSIZE	2048
- #define MAXPHYS		(64 * 1024)	/* max raw I/O transfer size */
-+#endif
- 
- #define UPAGES	2		/* pages of u-area */
- 
-===================================================================
-RCS file: /cvs/src/src/newlib/libc/include/sys/features.h,v
-retrieving revision 1.7
-retrieving revision 1.8
-diff -u -r1.7 -r1.8
---- src/newlib/libc/include/sys/features.h	2005/10/18 18:39:46	1.7
-+++ src/newlib/libc/include/sys/features.h	2006/09/13 22:09:27	1.8
-@@ -15,7 +15,7 @@
-  *  OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
-  *  SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
-  *
-- *  $Id$
-+ *  $Id$
-  */
- 
- #ifndef _SYS_FEATURES_H
-@@ -45,6 +45,9 @@
- #define _POSIX_SHARED_MEMORY_OBJECTS	1
- #define _POSIX_SYNCHRONIZED_IO		1
- #define _POSIX_TIMERS			1
-+#define _POSIX_BARRIERS                 200112L
-+#define _POSIX_READER_WRITER_LOCKS      200112L
-+#define _POSIX_SPIN_LOCKS               200112L
- 
- 
- /* In P1003.1b but defined by drafts at least as early as P1003.1c/D10  */
-===================================================================
-RCS file: /cvs/src/src/newlib/libc/include/pthread.h,v
-retrieving revision 1.3
-retrieving revision 1.4
-diff -u -r1.3 -r1.4
---- src/newlib/libc/include/pthread.h	2002/10/08 13:03:07	1.3
-+++ src/newlib/libc/include/pthread.h	2006/09/13 22:09:27	1.4
-@@ -15,7 +15,7 @@
-  *  OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF THIS
-  *  SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
-  *
-- *  $Id$
-+ *  $Id$
-  */
- 
- #ifndef __PTHREAD_h
-@@ -50,18 +50,18 @@
- 
- /* Mutex Initialization Attributes, P1003.1c/Draft 10, p. 81 */
- 
--int	_EXFUN(pthread_mutexattr_init, (pthread_mutexattr_t *attr));
--int	_EXFUN(pthread_mutexattr_destroy, (pthread_mutexattr_t *attr));
-+int	_EXFUN(pthread_mutexattr_init, (pthread_mutexattr_t *__attr));
-+int	_EXFUN(pthread_mutexattr_destroy, (pthread_mutexattr_t *__attr));
- int	_EXFUN(pthread_mutexattr_getpshared,
--		(const pthread_mutexattr_t *attr, int  *pshared));
-+		(_CONST pthread_mutexattr_t *__attr, int  *__pshared));
- int	_EXFUN(pthread_mutexattr_setpshared,
--		(pthread_mutexattr_t *attr, int pshared));
-+		(pthread_mutexattr_t *__attr, int __pshared));
- 
- /* Initializing and Destroying a Mutex, P1003.1c/Draft 10, p. 87 */
- 
- int	_EXFUN(pthread_mutex_init,
--	(pthread_mutex_t *mutex, const pthread_mutexattr_t *attr));
--int	_EXFUN(pthread_mutex_destroy, (pthread_mutex_t *mutex));
-+	(pthread_mutex_t *__mutex, _CONST pthread_mutexattr_t *__attr));
-+int	_EXFUN(pthread_mutex_destroy, (pthread_mutex_t *__mutex));
- 
- /* This is used to statically initialize a pthread_mutex_t. Example:
-   
-@@ -73,31 +73,31 @@
- /*  Locking and Unlocking a Mutex, P1003.1c/Draft 10, p. 93
-     NOTE: P1003.4b/D8 adds pthread_mutex_timedlock(), p. 29 */
- 
--int	_EXFUN(pthread_mutex_lock, (pthread_mutex_t *mutex));
--int	_EXFUN(pthread_mutex_trylock, (pthread_mutex_t *mutex));
--int	_EXFUN(pthread_mutex_unlock, (pthread_mutex_t *mutex));
-+int	_EXFUN(pthread_mutex_lock, (pthread_mutex_t *__mutex));
-+int	_EXFUN(pthread_mutex_trylock, (pthread_mutex_t *__mutex));
-+int	_EXFUN(pthread_mutex_unlock, (pthread_mutex_t *__mutex));
- 
- #if defined(_POSIX_TIMEOUTS)
- 
- int	_EXFUN(pthread_mutex_timedlock,
--	(pthread_mutex_t *mutex, const struct timespec *timeout));
-+	(pthread_mutex_t *__mutex, _CONST struct timespec *__timeout));
- 
- #endif /* _POSIX_TIMEOUTS */
- 
- /* Condition Variable Initialization Attributes, P1003.1c/Draft 10, p. 96 */
-  
--int	_EXFUN(pthread_condattr_init, (pthread_condattr_t *attr));
--int	_EXFUN(pthread_condattr_destroy, (pthread_condattr_t *attr));
-+int	_EXFUN(pthread_condattr_init, (pthread_condattr_t *__attr));
-+int	_EXFUN(pthread_condattr_destroy, (pthread_condattr_t *__attr));
- int	_EXFUN(pthread_condattr_getpshared,
--		(const pthread_condattr_t *attr, int *pshared));
-+		(_CONST pthread_condattr_t *__attr, int *__pshared));
- int	_EXFUN(pthread_condattr_setpshared,
--		(pthread_condattr_t *attr, int pshared));
-+		(pthread_condattr_t *__attr, int __pshared));
-  
- /* Initializing and Destroying a Condition Variable, P1003.1c/Draft 10, p. 87 */
-  
- int	_EXFUN(pthread_cond_init,
--	(pthread_cond_t *cond, const pthread_condattr_t *attr));
--int	_EXFUN(pthread_cond_destroy, (pthread_cond_t *mutex));
-+	(pthread_cond_t *__cond, _CONST pthread_condattr_t *__attr));
-+int	_EXFUN(pthread_cond_destroy, (pthread_cond_t *__mutex));
-  
- /* This is used to statically initialize a pthread_cond_t. Example:
-   
-@@ -108,49 +108,50 @@
-  
- /* Broadcasting and Signaling a Condition, P1003.1c/Draft 10, p. 101 */
-  
--int	_EXFUN(pthread_cond_signal, (pthread_cond_t *cond));
--int	_EXFUN(pthread_cond_broadcast, (pthread_cond_t *cond));
-+int	_EXFUN(pthread_cond_signal, (pthread_cond_t *__cond));
-+int	_EXFUN(pthread_cond_broadcast, (pthread_cond_t *__cond));
-  
- /* Waiting on a Condition, P1003.1c/Draft 10, p. 105 */
-  
- int	_EXFUN(pthread_cond_wait,
--	(pthread_cond_t *cond, pthread_mutex_t *mutex));
-+	(pthread_cond_t *__cond, pthread_mutex_t *__mutex));
-  
- int	_EXFUN(pthread_cond_timedwait,
--		(pthread_cond_t *cond, pthread_mutex_t *mutex,
--		const struct timespec *abstime));
-+		(pthread_cond_t *__cond, pthread_mutex_t *__mutex,
-+		_CONST struct timespec *__abstime));
-  
- #if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
- 
- /* Thread Creation Scheduling Attributes, P1003.1c/Draft 10, p. 120 */
- 
- int	_EXFUN(pthread_attr_setscope,
--		(pthread_attr_t *attr, int contentionscope));
-+		(pthread_attr_t *__attr, int __contentionscope));
- int	_EXFUN(pthread_attr_getscope,
--	(const pthread_attr_t *attr, int *contentionscope));
-+	(_CONST pthread_attr_t *__attr, int *__contentionscope));
- int	_EXFUN(pthread_attr_setinheritsched,
--		(pthread_attr_t *attr, int inheritsched));
-+	(pthread_attr_t *__attr, int __inheritsched));
- int	_EXFUN(pthread_attr_getinheritsched,
--		(const pthread_attr_t *attr, int *inheritsched));
--int	_EXFUN(pthread_attr_setschedpolicy, (pthread_attr_t *attr, int policy));
-+	(_CONST pthread_attr_t *__attr, int *__inheritsched));
-+int	_EXFUN(pthread_attr_setschedpolicy,
-+	(pthread_attr_t *__attr, int __policy));
- int	_EXFUN(pthread_attr_getschedpolicy,
--	(const pthread_attr_t *attr, int *policy));
-+	(_CONST pthread_attr_t *__attr, int *__policy));
- 
- #endif /* defined(_POSIX_THREAD_PRIORITY_SCHEDULING) */
- 
- int	_EXFUN(pthread_attr_setschedparam,
--	(pthread_attr_t *attr, const struct sched_param *param));
-+	(pthread_attr_t *__attr, _CONST struct sched_param *__param));
- int	_EXFUN(pthread_attr_getschedparam,
--	(const pthread_attr_t *attr, struct sched_param *param));
-+	(_CONST pthread_attr_t *__attr, struct sched_param *__param));
- 
- #if defined(_POSIX_THREAD_PRIORITY_SCHEDULING)
- 
- /* Dynamic Thread Scheduling Parameters Access, P1003.1c/Draft 10, p. 124 */
- 
- int	_EXFUN(pthread_getschedparam,
--	(pthread_t thread, int *policy, struct sched_param *param));
-+	(pthread_t __pthread, int *__policy, struct sched_param *__param));
- int	_EXFUN(pthread_setschedparam,
--	(pthread_t thread, int policy, struct sched_param *param));
-+	(pthread_t __pthread, int __policy, struct sched_param *__param));
- 
- #endif /* defined(_POSIX_THREAD_PRIORITY_SCHEDULING) */
- 
-@@ -159,13 +160,13 @@
- /* Mutex Initialization Scheduling Attributes, P1003.1c/Draft 10, p. 128 */
-  
- int	_EXFUN(pthread_mutexattr_setprotocol,
--	(pthread_mutexattr_t *attr, int protocol));
-+	(pthread_mutexattr_t *__attr, int __protocol));
- int	_EXFUN(pthread_mutexattr_getprotocol,
--		(const pthread_mutexattr_t *attr, int *protocol));
-+	(_CONST pthread_mutexattr_t *__attr, int *__protocol));
- int	_EXFUN(pthread_mutexattr_setprioceiling,
--	(pthread_mutexattr_t *attr, int prioceiling));
-+	(pthread_mutexattr_t *__attr, int __prioceiling));
- int	_EXFUN(pthread_mutexattr_getprioceiling,
--	(const pthread_mutexattr_t *attr, int *prioceiling));
-+	(_CONST pthread_mutexattr_t *__attr, int *__prioceiling));
- 
- #endif /* _POSIX_THREAD_PRIO_INHERIT || _POSIX_THREAD_PRIO_PROTECT */
- 
-@@ -174,46 +175,46 @@
- /* Change the Priority Ceiling of a Mutex, P1003.1c/Draft 10, p. 131 */
- 
- int	_EXFUN(pthread_mutex_setprioceiling,
--	(pthread_mutex_t *mutex, int prioceiling, int *old_ceiling));
-+	(pthread_mutex_t *__mutex, int __prioceiling, int *__old_ceiling));
- int	_EXFUN(pthread_mutex_getprioceiling,
--	(pthread_mutex_t *mutex, int *prioceiling));
-+	(pthread_mutex_t *__mutex, int *__prioceiling));
- 
- #endif /* _POSIX_THREAD_PRIO_PROTECT */
- 
- /* Thread Creation Attributes, P1003.1c/Draft 10, p, 140 */
- 
--int	_EXFUN(pthread_attr_init, (pthread_attr_t *attr));
--int	_EXFUN(pthread_attr_destroy, (pthread_attr_t *attr));
-+int	_EXFUN(pthread_attr_init, (pthread_attr_t *__attr));
-+int	_EXFUN(pthread_attr_destroy, (pthread_attr_t *__attr));
- int	_EXFUN(pthread_attr_getstacksize,
--	(const pthread_attr_t *attr, size_t *stacksize));
-+	(_CONST pthread_attr_t *__attr, size_t *__stacksize));
- int	_EXFUN(pthread_attr_setstacksize,
--	(pthread_attr_t *attr, size_t stacksize));
-+	(pthread_attr_t *__attr, size_t stacksize));
- int	_EXFUN(pthread_attr_getstackaddr,
--	(const pthread_attr_t *attr, void **stackaddr));
-+	(_CONST pthread_attr_t *__attr, void **__stackaddr));
- int	_EXFUN(pthread_attr_setstackaddr,
--	(pthread_attr_t  *attr, void *stackaddr));
-+	(pthread_attr_t  *__attr, void *__stackaddr));
- int	_EXFUN(pthread_attr_getdetachstate,
--	(const pthread_attr_t *attr, int *detachstate));
-+	(_CONST pthread_attr_t *__attr, int *__detachstate));
- int	_EXFUN(pthread_attr_setdetachstate,
--	(pthread_attr_t *attr, int detachstate));
-+	(pthread_attr_t *__attr, int __detachstate));
- 
- /* Thread Creation, P1003.1c/Draft 10, p. 144 */
- 
- int	_EXFUN(pthread_create,
--	(pthread_t *thread, const pthread_attr_t  *attr,
--	void *(*start_routine)( void * ), void *arg));
-+	(pthread_t *__pthread, _CONST pthread_attr_t  *__attr,
-+	void *(*__start_routine)( void * ), void *__arg));
- 
- /* Wait for Thread Termination, P1003.1c/Draft 10, p. 147 */
- 
--int	_EXFUN(pthread_join, (pthread_t thread, void **value_ptr));
-+int	_EXFUN(pthread_join, (pthread_t __pthread, void **__value_ptr));
- 
- /* Detaching a Thread, P1003.1c/Draft 10, p. 149 */
- 
--int	_EXFUN(pthread_detach, (pthread_t thread));
-+int	_EXFUN(pthread_detach, (pthread_t __pthread));
- 
- /* Thread Termination, p1003.1c/Draft 10, p. 150 */
- 
--void	_EXFUN(pthread_exit, (void *value_ptr));
-+void	_EXFUN(pthread_exit, (void *__value_ptr));
- 
- /* Get Calling Thread's ID, p1003.1c/Draft 10, p. XXX */
- 
-@@ -221,7 +222,7 @@
- 
- /* Compare Thread IDs, p1003.1c/Draft 10, p. 153 */
- 
--int	_EXFUN(pthread_equal, (pthread_t t1, pthread_t t2));
-+int	_EXFUN(pthread_equal, (pthread_t __t1, pthread_t __t2));
- 
- /* Dynamic Package Initialization */
- 
-@@ -234,21 +235,22 @@
- #define PTHREAD_ONCE_INIT  { 1, 0 }  /* is initialized and not run */
-  
- int	_EXFUN(pthread_once,
--	(pthread_once_t *once_control, void (*init_routine)(void)));
-+	(pthread_once_t *__once_control, void (*__init_routine)(void)));
- 
- /* Thread-Specific Data Key Create, P1003.1c/Draft 10, p. 163 */
- 
- int	_EXFUN(pthread_key_create,
--	(pthread_key_t *key, void (*destructor)( void * )));
-+	(pthread_key_t *__key, void (*__destructor)( void * )));
- 
- /* Thread-Specific Data Management, P1003.1c/Draft 10, p. 165 */
- 
--int	_EXFUN(pthread_setspecific, (pthread_key_t key, const void *value));
--void *	_EXFUN(pthread_getspecific, (pthread_key_t key));
-+int	_EXFUN(pthread_setspecific,
-+	(pthread_key_t __key, _CONST void *__value));
-+void *	_EXFUN(pthread_getspecific, (pthread_key_t __key));
- 
- /* Thread-Specific Data Key Deletion, P1003.1c/Draft 10, p. 167 */
- 
--int	_EXFUN(pthread_key_delete, (pthread_key_t key));
-+int	_EXFUN(pthread_key_delete, (pthread_key_t __key));
- 
- /* Execution of a Thread, P1003.1c/Draft 10, p. 181 */
- 
-@@ -260,38 +262,94 @@
- 
- #define PTHREAD_CANCELED ((void *) -1)
- 
--int	_EXFUN(pthread_cancel, (pthread_t thread));
-+int	_EXFUN(pthread_cancel, (pthread_t __pthread));
- 
- /* Setting Cancelability State, P1003.1c/Draft 10, p. 183 */
- 
--int	_EXFUN(pthread_setcancelstate, (int state, int *oldstate));
--int	_EXFUN(pthread_setcanceltype, (int type, int *oldtype));
-+int	_EXFUN(pthread_setcancelstate, (int __state, int *__oldstate));
-+int	_EXFUN(pthread_setcanceltype, (int __type, int *__oldtype));
- void 	_EXFUN(pthread_testcancel, (void));
- 
- /* Establishing Cancellation Handlers, P1003.1c/Draft 10, p. 184 */
- 
--void 	_EXFUN(pthread_cleanup_push, (void (*routine)( void * ), void *arg));
--void 	_EXFUN(pthread_cleanup_pop, (int execute));
-+void 	_EXFUN(pthread_cleanup_push,
-+	(void (*__routine)( void * ), void *__arg));
-+void 	_EXFUN(pthread_cleanup_pop, (int __execute));
- 
- #if defined(_POSIX_THREAD_CPUTIME)
-  
- /* Accessing a Thread CPU-time Clock, P1003.4b/D8, p. 58 */
-  
- int	_EXFUN(pthread_getcpuclockid,
--	(pthread_t thread_id, clockid_t *clock_id));
-+	(pthread_t __pthread_id, clockid_t *__clock_id));
-  
- /* CPU-time Clock Thread Creation Attribute, P1003.4b/D8, p. 59 */
- 
- int	_EXFUN(pthread_attr_setcputime,
--	(pthread_attr_t *attr, int clock_allowed));
-+	(pthread_attr_t *__attr, int __clock_allowed));
- 
- int	_EXFUN(pthread_attr_getcputime,
--	(pthread_attr_t *attr, int *clock_allowed));
-+	(pthread_attr_t *__attr, int *__clock_allowed));
- 
- #endif /* defined(_POSIX_THREAD_CPUTIME) */
- 
-+
- #endif /* defined(_POSIX_THREADS) */
- 
-+#if defined(_POSIX_BARRIERS)
-+
-+int	_EXFUN(pthread_barrierattr_init, (pthread_barrierattr_t *__attr));
-+int	_EXFUN(pthread_barrierattr_destroy, (pthread_barrierattr_t *__attr));
-+int	_EXFUN(pthread_barrierattr_getpshared,
-+	(_CONST pthread_barrierattr_t *__attr, int *__pshared));
-+int	_EXFUN(pthread_barrierattr_setpshared,
-+	(pthread_barrierattr_t *__attr, int __pshared));
-+
-+#define PTHREAD_BARRIER_SERIAL_THREAD -1
-+
-+int	_EXFUN(pthread_barrier_init,
-+	(pthread_barrier_t *__barrier,
-+	_CONST pthread_barrierattr_t *__attr, unsigned __count));
-+int	_EXFUN(pthread_barrier_destroy, (pthread_barrier_t *__barrier));
-+int	_EXFUN(pthread_barrier_wait,(pthread_barrier_t *__barrier));
-+
-+#endif /* defined(_POSIX_BARRIERS) */
-+
-+#if defined(_POSIX_SPIN_LOCKS)
-+
-+int	_EXFUN(pthread_spin_init,
-+	(pthread_spinlock_t *__spinlock, int __pshared));
-+int	_EXFUN(pthread_spin_destroy, (pthread_spinlock_t *__spinlock));
-+int	_EXFUN(pthread_spin_lock, (pthread_spinlock_t *__spinlock));
-+int	_EXFUN(pthread_spin_trylock, (pthread_spinlock_t *__spinlock));
-+int	_EXFUN(pthread_spin_unlock, (pthread_spinlock_t *__spinlock));
-+
-+#endif /* defined(_POSIX_SPIN_LOCKS) */
-+
-+#if defined(_POSIX_READER_WRITER_LOCKS)
-+
-+int	_EXFUN(pthread_rwlockattr_init, (pthread_rwlockattr_t *__attr));
-+int	_EXFUN(pthread_rwlockattr_destroy, (pthread_rwlockattr_t *__attr));
-+int	_EXFUN(pthread_rwlockattr_getpshared,
-+	(_CONST pthread_rwlockattr_t *__attr, int *__pshared));
-+int	_EXFUN(pthread_rwlockattr_setpshared,
-+	(pthread_rwlockattr_t *__attr, int __pshared));
-+
-+int	_EXFUN(pthread_rwlock_init,
-+	(pthread_rwlock_t *__rwlock, _CONST pthread_rwlockattr_t *__attr));
-+int	_EXFUN(pthread_rwlock_destroy, (pthread_rwlock_t *__rwlock));
-+int	_EXFUN(pthread_rwlock_rdlock,(pthread_rwlock_t *__rwlock));
-+int	_EXFUN(pthread_rwlock_tryrdlock,(pthread_rwlock_t *__rwlock));
-+int	_EXFUN(pthread_rwlock_timedrdlock,
-+        (pthread_rwlock_t *__rwlock, _CONST struct timespec *__abstime));
-+int	_EXFUN(pthread_rwlock_wrlock,(pthread_rwlock_t *__rwlock));
-+int	_EXFUN(pthread_rwlock_trywrlock,(pthread_rwlock_t *__rwlock));
-+int	_EXFUN(pthread_rwlock_timedwrlock,
-+        (pthread_rwlock_t *__rwlock, _CONST struct timespec *__abstime));
-+
-+#endif /* defined(_POSIX_READER_WRITER_LOCKS) */
-+
-+
- #ifdef __cplusplus
- }
- #endif
-===================================================================
-RCS file: /cvs/src/src/newlib/libc/include/sys/types.h,v
-retrieving revision 1.25
-retrieving revision 1.26
-diff -u -r1.25 -r1.26
---- src/newlib/libc/include/sys/types.h	2006/08/19 16:13:23	1.25
-+++ src/newlib/libc/include/sys/types.h	2006/09/13 22:09:27	1.26
-@@ -371,6 +371,36 @@
- #endif
- #endif /* defined(_POSIX_THREADS) */
- 
-+/* POSIX Barrier Types */
-+
-+#if defined(_POSIX_BARRIERS)
-+typedef __uint32_t pthread_barrier_t;        /* POSIX Barrier Object */
-+typedef struct {
-+  int   is_initialized;  /* is this structure initialized? */
-+#if defined(_POSIX_THREAD_PROCESS_SHARED)
-+  int   process_shared;       /* allow this to be shared amongst processes */
-+#endif
-+} pthread_barrierattr_t;
-+#endif /* defined(_POSIX_BARRIERS) */
-+
-+/* POSIX Spin Lock Types */
-+
-+#if defined(_POSIX_SPIN_LOCKS)
-+typedef __uint32_t pthread_spinlock_t;        /* POSIX Spin Lock Object */
-+#endif /* defined(_POSIX_SPIN_LOCKS) */
-+
-+/* POSIX Reader/Writer Lock Types */
-+
-+#if defined(_POSIX_READER_WRITER_LOCKS)
-+typedef __uint32_t pthread_rwlock_t;         /* POSIX RWLock Object */
-+typedef struct {
-+  int   is_initialized;       /* is this structure initialized? */
-+#if defined(_POSIX_THREAD_PROCESS_SHARED)
-+  int   process_shared;       /* allow this to be shared amongst processes */
-+#endif
-+} pthread_rwlockattr_t;
-+#endif /* defined(_POSIX_READER_WRITER_LOCKS) */
-+
- #endif  /* !__need_inttypes */
- 
- #undef __need_inttypes
