Index: c/src/lib/libbsp/arm/acinclude.m4
===================================================================
--- c/src/lib/libbsp/arm/acinclude.m4	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ c/src/lib/libbsp/arm/acinclude.m4	(revision f2a228b2cb5ce376c56ae8d767084b92f2822af0)
@@ -15,6 +15,4 @@
   gdbarmsim )
     AC_CONFIG_SUBDIRS([gdbarmsim]);;
-  gp32 )
-    AC_CONFIG_SUBDIRS([gp32]);;
   gumstix )
     AC_CONFIG_SUBDIRS([gumstix]);;
Index: src/lib/libbsp/arm/gp32/Makefile.am
===================================================================
--- c/src/lib/libbsp/arm/gp32/Makefile.am	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,68 +1,0 @@
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-include $(top_srcdir)/../../../../automake/compile.am
-
-include_bspdir = $(includedir)/bsp
-
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += smc/smc.h
-include_HEADERS += ../../shared/include/tm27.h
-
-include_bsp_HEADERS =
-
-nodist_include_HEADERS = include/bspopts.h
-nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h
-DISTCLEANFILES = include/bspopts.h
-
-nodist_include_HEADERS += ../../shared/include/coverhd.h
-
-noinst_LIBRARIES = libbspstart.a
-libbspstart_a_SOURCES = start/start.S
-project_lib_DATA = start.$(OBJEXT)
-
-dist_project_lib_DATA += startup/linkcmds
-
-noinst_LIBRARIES += libbsp.a
-libbsp_a_SOURCES =
-
-# startup
-libbsp_a_SOURCES += ../../shared/bsplibc.c ../../shared/bsppost.c \
-    ../../shared/bsppredriverhook.c ../../shared/bspgetworkarea.c \
-    startup/bspstart.c startup/bspidle.c \
-    ../../shared/bspclean.c startup/bspreset.c \
-    startup/memmap.c ../../shared/bootcard.c ../../shared/sbrk.c \
-    ../../shared/gnatinstallhandler.c
-libbsp_a_SOURCES += ../../shared/cpucounterread.c
-libbsp_a_SOURCES += ../../shared/cpucounterdiff.c
-# console
-libbsp_a_SOURCES += console/uart.c ../../shared/console.c \
-    ../../shared/console_select.c  ../../shared/console_control.c \
-    ../../shared/console_read.c ../../shared/console_write.c 
-# IRQ
-include_bsp_HEADERS += ../../shared/include/irq-generic.h \
-	../../shared/include/irq-info.h
-libbsp_a_SOURCES += ../../shared/src/irq-default-handler.c
-libbsp_a_SOURCES += ../../shared/src/irq-generic.c
-libbsp_a_SOURCES += ../../shared/src/irq-info.c
-libbsp_a_SOURCES += ../../shared/src/irq-legacy.c
-libbsp_a_SOURCES += ../../shared/src/irq-server.c
-libbsp_a_SOURCES += ../../shared/src/irq-shell.c
-# abort
-libbsp_a_SOURCES += ../shared/abort/abort.c
-# smc
-libbsp_a_SOURCES += smc/smc.c smc/smc.h
-
-# Cache
-libbsp_a_SOURCES += ../../../libcpu/shared/src/cache_manager.c
-libbsp_a_SOURCES += ../../shared/include/cache_.h
-libbsp_a_CPPFLAGS = -I$(srcdir)/../../shared/include
-
-libbsp_a_LIBADD = ../../../libcpu/@RTEMS_CPU@/shared/arm920.rel \
-    ../../../libcpu/@RTEMS_CPU@/s3c24xx/clock.rel \
-    ../../../libcpu/@RTEMS_CPU@/s3c24xx/timer.rel \
-    ../../../libcpu/@RTEMS_CPU@/s3c24xx/irq.rel
-
-include $(srcdir)/preinstall.am
-include $(top_srcdir)/../../../../automake/local.am
Index: src/lib/libbsp/arm/gp32/README
===================================================================
--- c/src/lib/libbsp/arm/gp32/README	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,3 +1,0 @@
-This is the BSP for GamePark's GP32, a single board
-computer using the Samsung S3C2400 SoC CPU.
-
Index: src/lib/libbsp/arm/gp32/bsp_specs
===================================================================
--- c/src/lib/libbsp/arm/gp32/bsp_specs	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,13 +1,0 @@
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*startfile:
-%{!qrtems: %(old_startfile)} \
-%{!nostdlib: %{qrtems: start.o%s crti.o%s crtbegin.o%s -e _start}}
-
-*link:
-%{!qrtems: %(old_link)} %{qrtems: -dc -dp -N}
-
-*endfile:
-%{!qrtems: %(old_endfiles)} %{qrtems: crtend.o%s crtn.o%s }
Index: src/lib/libbsp/arm/gp32/configure.ac
===================================================================
--- c/src/lib/libbsp/arm/gp32/configure.ac	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,23 +1,0 @@
-## Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.69])
-AC_INIT([rtems-c-src-lib-libbsp-arm-gp32],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_CANONICALIZE_TOOLS
-RTEMS_PROG_CCAS
-
-RTEMS_CHECK_NETWORKING
-AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
-
-RTEMS_BSP_CLEANUP_OPTIONS(0, 1)
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
Index: src/lib/libbsp/arm/gp32/console/uart.c
===================================================================
--- c/src/lib/libbsp/arm/gp32/console/uart.c	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,245 +1,0 @@
-/*
- *  console driver for S3C2400 UARTs
- *
- *  This driver uses the shared console driver in
- *  ...../libbsp/shared/console.c
- *
- *  If you want the driver to be interrupt driven, you
- *  need to write the ISR, and in the ISR insert the
- *  chars into termios's queue.
- *
- *  Copyright (c) 2004 Cogent Computer Systems
- *  Written by Jay Monkman <jtm@lopingdog.com>
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
-*/
-#include <bsp.h>                /* Must be before libio.h */
-#include <rtems/libio.h>
-#include <termios.h>
-#include <rtems/bspIo.h>
-
-/* Put the CPU (or UART) specific header file #include here */
-#include <s3c24xx.h>
-#include <libchip/serial.h>
-#include <libchip/sersupp.h>
-
-/* How many serial ports? */
-#define NUM_DEVS       1
-
-int     uart_poll_read(int minor);
-
-int dbg_dly;
-
-/* static function prototypes */
-static int     uart_first_open(int major, int minor, void *arg);
-static int     uart_last_close(int major, int minor, void *arg);
-static int     uart_read(int minor);
-static ssize_t uart_write(int minor, const char *buf, size_t len);
-static void    uart_init(int minor);
-static void    uart_write_polled(int minor, char c);
-static int     uart_set_attributes(int minor, const struct termios *t);
-
-/* These are used by code in console.c */
-unsigned long Console_Configuration_Count = NUM_DEVS;
-
-/* Pointers to functions for handling the UART. */
-const console_fns uart_fns =
-{
-    libchip_serial_default_probe,
-    uart_first_open,
-    uart_last_close,
-    uart_read,
-    uart_write,
-    uart_init,
-    uart_write_polled,   /* not used in this driver */
-    uart_set_attributes,
-    FALSE      /* TRUE if interrupt driven, FALSE if not. */
-};
-
-/*
- * There's one item in array for each UART.
- *
- * Some of these fields are marked "NOT USED". They are not used
- * by console.c, but may be used by drivers in libchip
- *
- */
-console_tbl Console_Configuration_Ports[] = {
-    {
-        "/dev/com0",                      /* sDeviceName */
-        SERIAL_CUSTOM,                    /* deviceType */
-        &uart_fns,                        /* pDeviceFns */
-        NULL,                             /* deviceProbe */
-        NULL,                             /* pDeviceFlow */
-        0,                                /* ulMargin - NOT USED */
-        0,                                /* ulHysteresis - NOT USED */
-        NULL,                             /* pDeviceParams */
-        0,                                /* ulCtrlPort1  - NOT USED */
-        0,                                /* ulCtrlPort2  - NOT USED */
-        0,                                /* ulDataPort  - NOT USED */
-        NULL,                             /* getRegister - NOT USED */
-        NULL,                             /* setRegister - NOT USED */
-        NULL,                             /* getData - NOT USED */
-        NULL,                             /* setData - NOT USED */
-        0,                                /* ulClock - NOT USED */
-        0                                 /* ulIntVector - NOT USED */
-    }
-};
-
-/*********************************************************************/
-/* Functions called via termios callbacks (i.e. the ones in uart_fns */
-/*********************************************************************/
-
-/*
- * This is called the first time each device is opened. If the driver
- * is interrupt driven, you should enable interrupts here. Otherwise,
- * it's probably safe to do nothing.
- *
- * Since micromonitor already set up the UART, we do nothing.
- */
-static int uart_first_open(int major, int minor, void *arg)
-{
-    return 0;
-}
-
-
-/*
- * This is called the last time each device is closed. If the driver
- * is interrupt driven, you should disable interrupts here. Otherwise,
- * it's probably safe to do nothing.
- */
-static int uart_last_close(int major, int minor, void *arg)
-{
-    return 0;
-}
-
-
-/*
- * Read one character from UART.
- *
- * Return -1 if there's no data, otherwise return
- * the character in lowest 8 bits of returned int.
- */
-static int uart_read(int minor)
-{
-    char c;
-
-    if (minor == 0) {
-        if (rUTRSTAT0 & 0x1) {
-            c = rURXH0 & 0xff;
-            return c;
-        } else {
-            return -1;
-        }
-    } else {
-        printk("Unknown console minor number: %d\n", minor);
-        return -1;
-    }
-
-}
-
-
-/*
- * Write buffer to UART
- *
- * return 1 on success, -1 on error
- */
-static ssize_t uart_write(int minor, const char *buf, size_t len)
-{
-    int i;
-
-    if (minor == 0) {
-        for (i = 0; i < len; i++) {
-            /* Wait for fifo to have room */
-            while(!(rUTRSTAT0 & 0x2)) {
-                continue;
-            }
-
-           rUTXH0 = (char) buf[i];
-        }
-    } else {
-        printk("Unknown console minor number: %d\n", minor);
-        return -1;
-    }
-
-    return 1;
-}
-
-
-/* Set up the UART. */
-static void uart_init(int minor)
-{
-	int i;
-	unsigned int reg = 0;
-
-	/* enable UART0 */
-	rCLKCON|=0x100;
-
-	/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
-	reg = get_PCLK() / (16 * 115200) - 1;
-
-	/* FIFO enable, Tx/Rx FIFO clear */
-	rUFCON0 = 0x07;
-	rUMCON0 = 0x0;
-	/* Normal,No parity,1 stop,8 bit */
-	rULCON0 = 0x3;
-	/*
-	 * tx=level,rx=edge,disable timeout int.,enable rx error int.,
-	 * normal,interrupt or polling
-	 */
-	rUCON0 = 0x245;
-	rUBRDIV0 = reg;
-
-	for (i = 0; i < 100; i++);
-
-}
-
-/* I'm not sure this is needed for the shared console driver. */
-static void    uart_write_polled(int minor, char c)
-{
-    uart_write(minor, &c, 1);
-}
-
-/* This is for setting baud rate, bits, etc. */
-static int     uart_set_attributes(int minor, const struct termios *t)
-{
-    return 0;
-}
-
-/***********************************************************************/
-/*
- * The following functions are not used by TERMIOS, but other RTEMS
- * functions use them instead.
- */
-/***********************************************************************/
-/*
- * Read from UART. This is used in the exit code, and can't
- * rely on interrupts.
-*/
-int uart_poll_read(int minor)
-{
-    return uart_read(minor);
-}
-
-
-/*
- * Write a character to the console. This is used by printk() and
- * maybe other low level functions. It should not use interrupts or any
- * RTEMS system calls. It needs to be very simple
- */
-static void _BSP_put_char( char c ) {
-    uart_write_polled(0, c);
-    if (c == '\n') {
-        uart_write_polled(0, '\r');
-    }
-}
-
-BSP_output_char_function_type BSP_output_char = _BSP_put_char;
-
-static int _BSP_get_char(void)
-{
-  return uart_poll_read(0);
-}
-
-BSP_polling_getchar_function_type BSP_poll_char = _BSP_get_char;
Index: src/lib/libbsp/arm/gp32/include/bsp.h
===================================================================
--- c/src/lib/libbsp/arm/gp32/include/bsp.h	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,96 +1,0 @@
-/**
- * @file
- * @ingroup arm_gp32
- * @brief Global BSP definitons.
- */
-
-/*
- *  Copyright (c) Canon Research France SA.]
- *  Emmanuel Raguet, mailto:raguet@crf.canon.fr
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_ARM_GP32_BSP_H
-#define LIBBSP_ARM_GP32_BSP_H
-
-#include <bspopts.h>
-#include <bsp/default-initial-extension.h>
-
-#include <rtems.h>
-#include <rtems/iosupp.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-#include <s3c24xx.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BSP_FEATURE_IRQ_EXTENSION
-
-#define gp32_initButtons() {rPBCON=0x0;}
-#define gp32_getButtons() \
-    ( (((~rPEDAT >> 6) & 0x3 )<<8) | (((~rPBDAT >> 8) & 0xFF)<<0) )
-
-/**
- * @defgroup arm_gp32 GP32 Support
- * @ingroup bsp_arm
- * @brief GP32 Support Pacakge
- * @{
- */
-
-/**
- * @brief functions to get the differents s3c2400 clks
- * @{
- */
-
-uint32_t get_FCLK(void);
-uint32_t get_HCLK(void);
-uint32_t get_PCLK(void);
-uint32_t get_UCLK(void);
-
-/** @} */
-
-void gp32_setPalette( unsigned char pos, uint16_t color);
-
-/* What is the input clock freq in hertz? */
-/** @brief 12 MHz oscillator */
-#define BSP_OSC_FREQ  12000000
-/** @brief FCLK=133Mhz */
-#define M_MDIV 81
-#define M_PDIV 2
-#define M_SDIV 1
-/** @brief HCLK=FCLK/2, PCLK=FCLK/2 */
-#define M_CLKDIVN 2
-/** @brief enable refresh */
-#define REFEN	0x1
-/** @brief CBR(CAS before RAS)/auto refresh */
-#define TREFMD	0x0
-/** @brief 2 clk */
-#define Trp	0x0
-/** @brief 7 clk */
-#define Trc	0x3
-/** @brief 3 clk */
-#define Tchr	0x2
-
-/**
- * @brief This BSP provides its own IDLE thread to override the RTEMS one.
- *
- *  So we prototype it and define the constant confdefs.h expects
- *  to configure a BSP specific one.
- */
-void *bsp_idle_thread(uintptr_t ignored);
-
-/** @} */
-
-#define BSP_IDLE_TASK_BODY bsp_idle_thread
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _BSP_H */
-
Index: src/lib/libbsp/arm/gp32/make/custom/gp32.cfg
===================================================================
--- c/src/lib/libbsp/arm/gp32/make/custom/gp32.cfg	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,21 +1,0 @@
-#
-#  Config file for ARM GP32
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU=arm
-RTEMS_CPU_MODEL=s3c2400
-
-#  This contains the compiler options necessary to select the CPU model
-#  and (hopefully) optimize for it. 
-#
-CPU_CFLAGS = -mcpu=arm920t -DCPU_S3C2400
-
-# optimize flag: typically -O2
-CFLAGS_OPTIMIZE_V = -O2 -g
-
-define bsp-post-link
-	$(OBJCOPY) -O binary $(basename $@)$(EXEEXT) $(basename $@)$(DOWNEXT)
-	$(default-bsp-post-link)
-endef
Index: src/lib/libbsp/arm/gp32/preinstall.am
===================================================================
--- c/src/lib/libbsp/arm/gp32/preinstall.am	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,79 +1,0 @@
-## Automatically generated by ampolish3 - Do not edit
-
-if AMPOLISH3
-$(srcdir)/preinstall.am: Makefile.am
-	$(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
-endif
-
-PREINSTALL_DIRS =
-DISTCLEANFILES += $(PREINSTALL_DIRS)
-
-all-am: $(PREINSTALL_FILES)
-
-PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
-
-all-local: $(TMPINSTALL_FILES)
-
-TMPINSTALL_FILES =
-CLEANFILES += $(TMPINSTALL_FILES)
-
-$(PROJECT_LIB)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_LIB)
-	@: > $(PROJECT_LIB)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)
-	@: > $(PROJECT_INCLUDE)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/bsp/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
-	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
-$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
-
-$(PROJECT_INCLUDE)/smc.h: smc/smc.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/smc.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/smc.h
-
-$(PROJECT_INCLUDE)/tm27.h: ../../shared/include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/bsp/bootcard.h: ../../shared/include/bootcard.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bootcard.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bootcard.h
-
-$(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
-
-$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
-$(PROJECT_INCLUDE)/bsp/irq-generic.h: ../../shared/include/irq-generic.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq-generic.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq-generic.h
-
-$(PROJECT_INCLUDE)/bsp/irq-info.h: ../../shared/include/irq-info.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq-info.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq-info.h
-
Index: src/lib/libbsp/arm/gp32/smc/smc.c
===================================================================
--- c/src/lib/libbsp/arm/gp32/smc/smc.c	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,417 +1,0 @@
-/*
- * s3c2400 smc disk block device implementation
- *
- * Squidge's SMC Low-level access routines.
- * Inspired and derived from routines provided by Samsung Electronics
- *  M/M R&D Center & FireFly.
- */
-
-#include <rtems.h>
-#include <rtems/libio.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-
-#include "rtems/blkdev.h"
-#include "rtems/diskdevs.h"
-#include "smc.h"
-#include <rtems/bspIo.h>
-#include <s3c24xx.h>
-
-#define SMC_DEVICE_NAME "/dev/smc"
-#define SMC_SAMSUNG_ID    0xEC
-#define SMC_TOSHIBA_ID    0x98
-
-#define SMC_16MB  0x73
-#define SMC_32MB  0x75
-#define SMC_64MB  0x76
-#define SMC_128MB  0x79
-
-#define LBA_UNUSED      0x80000000
-#define LBA_RESERVED    0x80000001
-
-#define BLOCK_UNUSED    0x80000000
-#define BLOCK_RESERVED  0x80000001
-
-/* SmartMedia Command */
-#define SEQ_DATA_INPUT_CMD   0x80
-#define READ1_CMD            0x00
-#define READ1_1_CMD          0x01
-#define READ2_CMD            0x50
-#define READ_ID_CMD          0x90
-#define RESET_CMD            0xFF
-#define PAGE_PROGRAM_CMD     0x10
-#define BLOCK_ERASE_CMD      0x60
-#define BLOCK_ERASE_CFM_CMD  0xD0
-#define READ_STATUS_CMD      0x70
-#define RESET_PTR_CMD        0x00
-
-
-/* Internal SMC disk descriptor */
-struct SMC_INFO {
-  uint8_t  id[3];
-  uint32_t bytes_per_page;
-  uint32_t pages_per_block;
-  uint32_t blocks;
-  uint32_t mb;
-};
-
-/* Ths S3c2410 uses a different register map */
-#ifdef CPU_S3C2410
-#define rPBDAT rGPBDAT
-#define rPBCON rGPBCON
-#define rPDDAT rGPDDAT
-#define rPEDAT rGPEDAT
-#endif
-
-
-static struct SMC_INFO smc_info;
-
-uint32_t smc_l2p[0x2000];
-uint32_t smc_p2l[0x2000];
-
-#define sm_busy() while (!(rPDDAT & 0x200))
-#define sm_chip_en() rPDDAT &= (~0x80)
-#define sm_chip_dis() rPDDAT |= 0x80
-#define sm_cle_en() rPEDAT |= 0x20
-#define sm_cle_dis() rPEDAT &= (~0x20)
-#define sm_ale_en() rPEDAT |= 0x10
-#define sm_ale_dis() rPEDAT &= (~0x10)
-#define sm_wp_en() rPDDAT &= (~0x40)
-#define sm_wp_dis() rPDDAT |= 0x40
-#define sm_read_en() rPBCON &= 0xFFFF0000
-#define sm_read_dis() rPBCON = (rPBCON & 0xFFFF0000) | 0x5555
-#define sm_write_en() sm_read_dis()
-#define sm_write_dis() sm_read_en()
-
-static void sm_write( uint8_t data)
-{
-  rPBDAT = (rPBDAT & 0xFF00) | data;
-  rPEDAT &= (~0x08);
-  rPEDAT |= 0x08;
-}
-
-static uint8_t sm_read(void)
-{
-  uint8_t data;
-
-  rPDDAT &= (~0x100);
-  data = rPBDAT & 0xFF;
-  rPDDAT |= 0x100;
-  return data;
-}
-
-static void smc_read_id( uint8_t* buf, uint32_t length)
-{
-  uint32_t i;
-
-  sm_chip_en();
-
-  sm_cle_en();
-  sm_write_en();
-  sm_write(READ_ID_CMD);
-  sm_write_dis();
-  sm_cle_dis();
-
-  sm_ale_en();
-  sm_write_en();
-  sm_write( 0);
-  sm_write_dis();
-  sm_ale_dis();
-
-  sm_read_en();
-  for (i=0;i<length;i++) *(buf+i) = sm_read();
-  sm_read_dis();
-
-  sm_chip_dis();
-}
-
-/* read an entire logical page of 512 bytes.*/
-static uint8_t smc_read_page (uint32_t lpage, uint8_t* buf)
-{
-  uint32_t block, page, i;
-
-  /* convert logical block to physical block
-     and then convert into page suitable for read1 command...
-  */
-  block = lpage >> 5;
-  if (smc_l2p[block] < LBA_UNUSED) {
-    page = smc_l2p[block] << 5;
-    page += (lpage & 0x1F);
-  }
-  else
-    return 0;
-
-  sm_chip_en();
-
-  sm_cle_en();
-  sm_write_en();
-  sm_write(READ1_CMD);
-  sm_write_dis();
-  sm_cle_dis();
-
-  sm_ale_en();
-  sm_write_en();
-  sm_write( 0x00);
-  sm_write( (uint8_t)(page >> 0));
-  sm_write( (uint8_t)(page >> 8));
-  if (smc_info.mb >= 64)
-    sm_write( (uint8_t)(page >> 16));
-  sm_write_dis();
-  sm_ale_dis();
-
-  sm_busy();
-
-  sm_read_en();
-  for (i = 0; i < 512; i++) {
-    *buf = sm_read();
-    buf++;
-  }
-  sm_read_dis();
-  sm_chip_dis();
-
-  sm_busy();
-  return 1;
-}
-
-static void smc_read_spare( uint32_t page, uint8_t* buf, uint8_t length)
-{
-  uint32_t i;
-
-  sm_chip_en();
-
-  sm_cle_en();
-  sm_read_dis();
-  sm_write(READ2_CMD);
-  sm_read_en();
-  sm_cle_dis();
-
-  sm_ale_en();
-  sm_read_dis();
-  sm_write( 0x00);
-  sm_write( (uint8_t)(page >> 0));
-  sm_write( (uint8_t)(page >> 8));
-  if (smc_info.mb >= 64)
-    sm_write( (uint8_t)(page >> 16));
-  sm_read_en();
-  sm_ale_dis();
-
-  sm_busy();
-
-  sm_read_en();
-  for (i=0;i<length;i++)
-    *(buf+i) = sm_read();
-  sm_read_dis();
-
-  sm_chip_dis();
-
-}
-
-static void smc_make_l2p(void)
-{
-  uint32_t pblock, i, j, lblock, zone, count, cnt1, cnt2, cnt3;
-  uint8_t data[512];
-
-  cnt1 = 0;
-  cnt2 = 0;
-  cnt3 = 0;
-
-  for (i=0;i<0x2000;i++) {
-    smc_l2p[i] = LBA_RESERVED;
-    smc_p2l[i] = BLOCK_RESERVED;
-  }
-
-  for (pblock=0;pblock<smc_info.blocks;pblock++) {
-    /* read physical block - first page */
-    smc_read_spare( pblock*smc_info.pages_per_block, (uint8_t*)&data, 16);
-
-    zone = pblock >> 10; /* divide by 1024 to get zone */
-    if ((data[5] == 0xFF) && ((data[6]&0xF8) == 0x10)) {
-      lblock = ((((data[6]<<8)|(data[7]<<0)) >> 1) & 0x03FF) + (zone * 1000);
-      smc_l2p[lblock] = pblock;
-      smc_p2l[pblock] = lblock;
-      cnt1++;
-    } else {
-      count = 0;
-      for (j=0;j<16;j++) {
-        if (data[j] == 0xFF) count++;
-      }
-      if (count == 16) {
-        smc_p2l[pblock] = BLOCK_UNUSED;
-        cnt2++;
-      } else {
-        smc_p2l[pblock] = BLOCK_RESERVED;
-        cnt3++;
-      }
-    }
-  }
-}
-
-
-static void smc_detect( uint8_t id1, uint8_t id2, uint8_t id3)
-{
-  smc_info.id[0] = id1;
-  smc_info.id[1] = id2;
-  smc_info.id[2] = id3;
-  smc_info.mb    = 0;
-  smc_info.bytes_per_page  = 0;
-  smc_info.pages_per_block = 0;
-  smc_info.blocks          = 0;
-
-  switch (id1) {
-    case SMC_SAMSUNG_ID:
-    case SMC_TOSHIBA_ID: {
-      switch (id2) {
-        case SMC_16MB  : smc_info.mb = 16; break;
-        case SMC_32MB  : smc_info.mb = 32; break;
-        case SMC_64MB  : smc_info.mb = 64; break;
-        case SMC_128MB : smc_info.mb = 128; break;
-      }
-      break;
-    }
-  }
-
-  switch (smc_info.mb) {
-    case 16  : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x0400; break;
-    case 32  : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x0800; break;
-    case 64  : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x1000; break;
-    case 128 : smc_info.bytes_per_page = 512; smc_info.pages_per_block = 32; smc_info.blocks = 0x2000; break;
-  }
-}
-
-static void smc_init( void)
-{
-  unsigned char buf[32];
-  int i;
-
-  /* reset smc */
-  sm_chip_en();
-  sm_cle_en();
-  sm_write_en();
-  sm_write(0xFF);
-  sm_write_dis();
-  sm_cle_dis();
-  for(i=0;i<10;i++);
-  sm_busy();
-  sm_chip_dis();
-
-  smc_read_id (buf, 4);
-  smc_detect (buf[0], buf[1], buf[2]);
-  printk ("SMC: [%02X-%02X-%02X-%02X]\n", buf[0], buf[1], buf[2], buf[3]);
-  printk ("SMC size: %dMB detected\n",smc_info.mb);
-  smc_make_l2p();
-}
-
-/* smc_write --
- * write stub
- */
-static int smc_write(rtems_blkdev_request *req)
-{
-  rtems_blkdev_request_done(req, RTEMS_SUCCESSFUL);
-  return 0;
-}
-
-
-/* smc_read --
- * PARAMETERS:
- *     req - pointer to the READ block device request info
- *
- * RETURNS:
- *     ioctl return value
- */
-static int
-smc_read(rtems_blkdev_request *req)
-{
-    uint32_t   i;
-    rtems_blkdev_sg_buffer *sg;
-    uint32_t   remains;
-
-    remains = smc_info.bytes_per_page * req->bufnum;
-    sg = req->bufs;
-    for (i = 0; (remains > 0) && (i < req->bufnum); i++, sg++)
-    {
-        int count = sg->length;
-        if (count > remains)
-            count = remains;
-        smc_read_page(sg->block,sg->buffer);
-        remains -= count;
-    }
-    rtems_blkdev_request_done(req, RTEMS_SUCCESSFUL);
-    return 0;
-}
-
-/* smc_ioctl --
- *     IOCTL handler for SMC device.
- *
- * PARAMETERS:
- *      dev  - device number (major, minor number)
- *      req  - IOCTL request code
- *      argp - IOCTL argument
- *
- * RETURNS:
- *     IOCTL return value
- */
-static int
-smc_ioctl(rtems_disk_device *dd, uint32_t req, void *argp)
-{
-    switch (req)
-    {
-        case RTEMS_BLKIO_REQUEST:
-        {
-            rtems_blkdev_request *r = argp;
-            switch (r->req)
-            {
-                case RTEMS_BLKDEV_REQ_READ:
-                    return smc_read(r);
-                case RTEMS_BLKDEV_REQ_WRITE:
-                    return smc_write(r);
-                default:
-                    errno = EINVAL;
-                    return -1;
-            }
-            break;
-        }
-
-        default:
-            errno = EINVAL;
-            return -1;
-    }
-}
-
-/* smc_initialize --
- *     RAM disk device driver initialization. Run through RAM disk
- *     configuration information and configure appropriate RAM disks.
- *
- * PARAMETERS:
- *     major - RAM disk major device number
- *     minor - minor device number, not applicable
- *     arg   - initialization argument, not applicable
- *
- * RETURNS:
- *     none
- */
-rtems_device_driver
-smc_initialize(
-    rtems_device_major_number major,
-    rtems_device_minor_number minor,
-    void *arg)
-{
-    rtems_status_code rc;
-    dev_t dev;
-    uint32_t block_num;
-
-    rc = rtems_disk_io_initialize();
-    if (rc != RTEMS_SUCCESSFUL)
-        return rc;
-
-    smc_init();
-    block_num = smc_info.blocks << 5;
-
-    dev = rtems_filesystem_make_dev_t(major, 0);
-    rc = rtems_disk_create_phys(dev, 512, block_num,
-                                    smc_ioctl, NULL, SMC_DEVICE_NAME);
-
-    return RTEMS_SUCCESSFUL;
-}
Index: src/lib/libbsp/arm/gp32/smc/smc.h
===================================================================
--- c/src/lib/libbsp/arm/gp32/smc/smc.h	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,44 +1,0 @@
-/**
- * @file
- * @ingroup gp32_smc
- * @brief SMC disk driver initialization entry point
- */
-
-#ifndef __SMC_H__
-#define __SMC_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <rtems.h>
-
-#include "rtems/blkdev.h"
-
-/**
- * @defgroup gp32_smc SMC Disk Driver
- * @ingroup arm_gp32
- * @brief SMC Disk Driver Support
- * @{
- */
-
-/**
- * @brief smc_initialize
- *     SMC disk driver initialization entry point.
- */
-rtems_device_driver
-smc_initialize(
-    rtems_device_major_number major,
-    rtems_device_minor_number minor,
-    void *arg);
-
-#define SMC_DRIVER_TABLE_ENTRY \
-    { smc_initialize, GENERIC_BLOCK_DEVICE_DRIVER_ENTRIES }
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
Index: src/lib/libbsp/arm/gp32/start/start.S
===================================================================
--- c/src/lib/libbsp/arm/gp32/start/start.S	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,198 +1,0 @@
-/*
- * GP32 startup code
- */
-
-/*
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp/linker-symbols.h>
-
-/* Some standard definitions...*/
-.equ PSR_MODE_USR,       0x10
-.equ PSR_MODE_FIQ,       0x11
-.equ PSR_MODE_IRQ,       0x12
-.equ PSR_MODE_SVC,       0x13
-.equ PSR_MODE_ABT,       0x17
-.equ PSR_MODE_UNDEF,     0x1B
-.equ PSR_MODE_SYS,       0x1F
-
-.equ PSR_I,              0x80
-.equ PSR_F,              0x40
-.equ PSR_T,              0x20
-
-.text
-.globl  _start
-_start:
-	b		_start2
-
-@---------------------------------------------------------------------------------
-@ AXF addresses
-@---------------------------------------------------------------------------------
-	.word   bsp_section_text_begin
-	.word   bsp_section_rodata_end
-	.word   bsp_section_data_begin
-	.word   bsp_section_bss_end
-	.word   bsp_section_bss_begin
-	.word   bsp_section_bss_end
-
-@---------------------------------------------------------------------------------
-@ GamePark magic sequence
-@---------------------------------------------------------------------------------
-	.word   0x44450011
-	.word   0x44450011
-	.word   0x01234567
-	.word   0x12345678
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-	.word   0x23456789
-	.word   0x34567890
-	.word   0x45678901
-	.word   0x56789012
-
-@---------------------------------------------------------------------------------
-_start2:
-@---------------------------------------------------------------------------------
-
-        /*
-         * Since I don't plan to return to the bootloader,
-         * I don't have to save the registers.
-         *
-         * I'll just set the CPSR for SVC mode, interrupts
-         * off, and ARM instructions.
-         */
-        mov     r0, #(PSR_MODE_SVC | PSR_I | PSR_F)
-        msr     cpsr, r0
-
-        /* --- Initialize stack pointer registers */
-        /* Enter IRQ mode and set up the IRQ stack pointer */
-        mov     r0, #(PSR_MODE_IRQ | PSR_I | PSR_F)     /* No interrupts */
-        msr     cpsr, r0
-        ldr     r1, =bsp_stack_irq_size
-        ldr     sp, =bsp_stack_irq_begin
-        add     sp, sp, r1
-
-        /* Enter FIQ mode and set up the FIQ stack pointer */
-        mov     r0, #(PSR_MODE_FIQ | PSR_I | PSR_F)     /* No interrupts */
-        msr     cpsr, r0
-        ldr     r1, =bsp_stack_fiq_size
-        ldr     sp, =bsp_stack_fiq_begin
-        add     sp, sp, r1
-
-        /* Enter ABT mode and set up the ABT stack pointer */
-        mov     r0, #(PSR_MODE_ABT | PSR_I | PSR_F)     /* No interrupts */
-        msr     cpsr, r0
-        ldr     r1, =bsp_stack_abt_size
-        ldr     sp, =bsp_stack_abt_begin
-        add     sp, sp, r1
-
-        /* Set up the SVC stack pointer last and stay in SVC mode */
-        mov     r0, #(PSR_MODE_SVC | PSR_I | PSR_F)     /* No interrupts */
-        msr     cpsr, r0
-        ldr     r1, =bsp_stack_svc_size
-        ldr     sp, =bsp_stack_svc_begin
-        add     sp, sp, r1
-        sub     sp, sp, #0x64
-
-
-	/* disable mmu, I and D caches*/
-	nop
-	nop
-	mrc p15, 0, r0, c1, c0, 0
-	bic r0, r0, #0x01
-	bic r0, r0, #0x04
-	bic r0, r0, #0x01000
-	mcr p15, 0, r0, c1, c0, 0
-	nop
-	nop
-
-	/* clean data cache */
-	mov   r1,#0x00
-Loop1:
-	mov   r2,#0x00
-Loop2:
-	mov r3, r2, lsl#26
-	orr r3, r3, r1, lsl#5
-	mcr p15, 0, r3, c7, c14, 2
-	add r2, r2, #0x01
-	cmp r2, #64
-	bne Loop2
-	add r1, r1, #0x01
-	cmp r1, #8
-	bne Loop1
-
-
-        /*
-         * Initialize the MMU. After we return, the MMU is enabled,
-         * and memory may be remapped. I hope we don't remap this
-         * memory away.
-         */
-        ldr     r0, =mem_map
-        bl      mmu_init
-
-        /*
-         * Initialize the exception vectors. This includes the
-         * exceptions vectors (0x00000000-0x0000001c), and the
-         * pointers to the exception handlers (0x00000020-0x0000003c).
-         */
-        mov     r0, #0
-        adr     r1, vector_block
-        ldmia   r1!, {r2-r9}
-        stmia   r0!, {r2-r9}
-        ldmia   r1!, {r2-r9}
-        stmia   r0!, {r2-r9}
-
-        /* Now we are prepared to start the BSP's C code */
-        mov     r0, #0
-        bl      boot_card
-
-        /*
-         * Theoretically, we could return to what started us up,
-         * but we'd have to have saved the registers and stacks.
-         * Instead, we'll just reset.
-         */
-        bl      bsp_reset
-
-        /* We shouldn't get here. If we do, hang */
-_hang:  b       _hang
-
-
-/*
- * This is the exception vector table and the pointers to
- * the functions that handle the exceptions. It's a total
- * of 16 words (64 bytes)
- */
-vector_block:
-        ldr     pc, Reset_Handler
-        ldr     pc, Undefined_Handler
-        ldr     pc, SWI_Handler
-        ldr     pc, Prefetch_Handler
-        ldr     pc, Abort_Handler
-        nop
-        ldr     pc, IRQ_Handler
-        ldr     pc, FIQ_Handler
-
-Reset_Handler:          b       bsp_reset
-Undefined_Handler:      b       Undefined_Handler
-SWI_Handler:            b       SWI_Handler
-Prefetch_Handler:       b       Prefetch_Handler
-Abort_Handler:          b       Abort_Handler
-                        nop
-IRQ_Handler:            b       IRQ_Handler
-FIQ_Handler:            b       FIQ_Handler
-
-.globl Reset_Handler
-.globl Undefined_Handler
-.globl SWI_Handler
-.globl Prefetch_Handler
-.globl Abort_Handler
-.globl IRQ_Handler
-.globl FIQ_Handler
Index: src/lib/libbsp/arm/gp32/startup/bspidle.c
===================================================================
--- c/src/lib/libbsp/arm/gp32/startup/bspidle.c	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,23 +1,0 @@
-/*
- *  BSP specific Idle thread
- */
-
-/*
- *  Copyright (c) 2000 Canon Research Centre France SA.
- *  Emmanuel Raguet, mailto:raguet@crf.canon.fr
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-
-void *bsp_idle_thread(uintptr_t ignored)
-{
-  while(1) {
-    __asm__ volatile ("MCR p15,0,r0,c7,c0,4     \n");
-  }
-  return NULL;
-}
-
Index: src/lib/libbsp/arm/gp32/startup/bspreset.c
===================================================================
--- c/src/lib/libbsp/arm/gp32/startup/bspreset.c	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,39 +1,0 @@
-/*
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <bsp/bootcard.h>
-
-void bsp_reset(void)
-{
-  rtems_interrupt_level level;
-
-  (void) level;
-  rtems_interrupt_disable(level);
-  /* disable mmu, invalide i-cache and call swi #4 */
-  __asm__ volatile(""
-    "mrc    p15,0,r0,c1,c0,0  \n"
-    "bic    r0,r0,#1          \n"
-    "mcr    p15,0,r0,c1,c0,0  \n"
-    "nop                      \n"
-    "nop                      \n"
-    "nop                      \n"
-    "nop                      \n"
-    "nop                      \n"
-    "mov    r0,#0             \n"
-    "MCR    p15,0,r0,c7,c5,0  \n"
-    "nop                      \n"
-    "nop                      \n"
-    "nop                      \n"
-    "nop                      \n"
-    "nop                      \n"
-    "swi    #4                "
-    :
-    :
-    : "r0"
-  );
-  /* we should be back in bios now */
-}
Index: src/lib/libbsp/arm/gp32/startup/bspstart.c
===================================================================
--- c/src/lib/libbsp/arm/gp32/startup/bspstart.c	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,89 +1,0 @@
-/*
- * This file contains the ARM BSP startup package. It includes application,
- * board, and monitor specific initialization and configuration. The generic CPU
- * dependent initialization has been performed before this routine is invoked.
- */
-
-/*
- *  Copyright (c) 2000 Canon Research Centre France SA.
- *  Emmanuel Raguet, mailto:raguet@crf.canon.fr
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <bsp/irq-generic.h>
-#include <rtems/bspIo.h>
-#include <s3c24xx.h>
-
-/*
- *  BSP Specific Initialization in C
- */
-static void bsp_start_default( void )
-{
-  uint32_t cr;
-  uint32_t pend,last;
-  uint32_t REFCNT;
-  int i;
-
-  /* stop RTC */
-  #ifdef CPU_S3C2400
-    rTICINT = 0x0;
-  #else
-    rTICNT = 0x0;
-  #endif
-  /* stop watchdog,ADC and timers */
-  rWTCON = 0x0;
-  rTCON = 0x0;
-  rADCCON = 0x0;
-
-  /* disable interrupts */
-  rINTMOD = 0x0;
-  rINTMSK = BIT_ALLMSK; /* unmasked by drivers */
-
-  last = 0;
-  for(i=0; i<4; i++) {
-    pend = rSRCPND;
-    if(pend == 0 || pend == last)
-      break;
-    rSRCPND = pend;
-    rINTPND = pend;
-    last    = pend;
-  }
-
-  /* setup clocks */
-  rCLKDIVN = M_CLKDIVN;
-  rMPLLCON = ((M_MDIV<<12)+(M_PDIV<<4)+M_SDIV);
-  /* setup rREFRESH
-   * period = 15.6 us, HCLK=66Mhz, (2048+1-15.6*66)
-   */
-  REFCNT   = 2048+1-(15.6*get_HCLK()/1000000);
-  rREFRESH = ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT);
-
-  /* set prescaler for timers 2,3,4 to 16(15+1) */
-  cr = rTCFG0 & 0xFFFF00FF;
-  rTCFG0 = (cr | (15<<8));
-
-  /* set prescaler for timers 0,1 to 1(0+1) */
-  cr = rTCFG0 & 0xFFFFFF00;
-  rTCFG0 = (cr | (0<<0));
-
-  /*
-   * Init rtems exceptions management
-   */
-  /* FIXME: Use shared start.S */
-  rtems_exception_init_mngt();
-
-  /*
-   * Init rtems interrupt management
-   */
-  bsp_interrupt_initialize();
-}
-
-/*
- *  By making this a weak alias for bsp_start_default, a brave soul
- *  can override the actual bsp_start routine used.
- */
-void bsp_start (void) __attribute__ ((weak, alias("bsp_start_default")));
Index: src/lib/libbsp/arm/gp32/startup/linkcmds
===================================================================
--- c/src/lib/libbsp/arm/gp32/startup/linkcmds	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,26 +1,0 @@
-MEMORY {
-	SDRAM_MMU : ORIGIN = 0x0c000000, LENGTH = 16k
-	SDRAM : ORIGIN = 0x0c004000, LENGTH = 7M - 16k
-}
-
-REGION_ALIAS ("REGION_START", SDRAM);
-REGION_ALIAS ("REGION_VECTOR", SDRAM);
-REGION_ALIAS ("REGION_TEXT", SDRAM);
-REGION_ALIAS ("REGION_TEXT_LOAD", SDRAM);
-REGION_ALIAS ("REGION_RODATA", SDRAM);
-REGION_ALIAS ("REGION_RODATA_LOAD", SDRAM);
-REGION_ALIAS ("REGION_DATA", SDRAM);
-REGION_ALIAS ("REGION_DATA_LOAD", SDRAM);
-REGION_ALIAS ("REGION_FAST_TEXT", SDRAM);
-REGION_ALIAS ("REGION_FAST_TEXT_LOAD", SDRAM);
-REGION_ALIAS ("REGION_FAST_DATA", SDRAM);
-REGION_ALIAS ("REGION_FAST_DATA_LOAD", SDRAM);
-REGION_ALIAS ("REGION_BSS", SDRAM);
-REGION_ALIAS ("REGION_WORK", SDRAM);
-REGION_ALIAS ("REGION_STACK", SDRAM);
-REGION_ALIAS ("REGION_NOCACHE", SDRAM);
-REGION_ALIAS ("REGION_NOCACHE_LOAD", SDRAM);
-
-_ttbl_base = ORIGIN (SDRAM_MMU);
-
-INCLUDE linkcmds.armv4
Index: src/lib/libbsp/arm/gp32/startup/memmap.c
===================================================================
--- c/src/lib/libbsp/arm/gp32/startup/memmap.c	(revision 687463d7f3b0abb1d98e6e630fb6d47541594bd4)
+++ 	(revision )
@@ -1,25 +1,0 @@
-/*
- *  GP32 Memory Map
- *
- *  Copyright (c) 2004 by Cogent Computer Systems
- *  Written by Jay Monkman <jtm@lopingdog.com>
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-#include <rtems.h>
-#include <libcpu/mmu.h>
-
-/* Remember, the ARM920 has 64 TLBs. If you have more 1MB sections than
- * that, you'll have TLB lookups, which could hurt performance.
- */
-mmu_sect_map_t mem_map[] = {
-/*  <phys addr>  <virt addr> <size> <flags> */
-    {0x0c000000, 0x00000000,   1, MMU_CACHE_NONE},     /* SDRAM for vectors */
-    {0x0c000000, 0x0c000000,   7, MMU_CACHE_WTHROUGH}, /* SDRAM W cache */
-    {0x0c700000, 0x0c700000,   1, MMU_CACHE_NONE},     /* SDRAM W/O cache */
-    {0x14000000, 0x14000000,   16, MMU_CACHE_NONE},    /* Internals Regs - */
-    {0x15000000, 0x15000000,   16, MMU_CACHE_NONE},    /* Internal Regs - */
-    {0x00000000, 0x00000000,   0,    0}                /* The end */
-};
