Index: c/build-tools/Makefile.in
===================================================================
--- c/build-tools/Makefile.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/build-tools/Makefile.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -98,5 +98,6 @@
 CONFIG_HEADER = ./src/config.h
 CONFIG_CLEAN_FILES = 
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in \
+src/config.h.in src/stamp-h.in
 
 
@@ -121,4 +122,32 @@
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
 	cd $(srcdir) && $(AUTOCONF)
+
+src/config.h: src/stamp-h
+	@if test ! -f $@; then \
+		rm -f src/stamp-h; \
+		$(MAKE) src/stamp-h; \
+	else :; fi
+src/stamp-h: $(srcdir)/src/config.h.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=src/config.h \
+	     $(SHELL) ./config.status
+	@echo timestamp > src/stamp-h 2> /dev/null
+$(srcdir)/src/config.h.in: $(srcdir)/src/stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/src/stamp-h.in; \
+		$(MAKE) $(srcdir)/src/stamp-h.in; \
+	else :; fi
+$(srcdir)/src/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@echo timestamp > $(srcdir)/src/stamp-h.in 2> /dev/null
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f src/config.h
+
+maintainer-clean-hdr:
 
 # This directory's subdirectories are mostly independent; you can cd
@@ -310,19 +339,19 @@
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
 
 mostlyclean: mostlyclean-recursive
 
-clean-am:  clean-tags clean-generic mostlyclean-am
+clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
 
 clean: clean-recursive
 
-distclean-am:  distclean-tags distclean-generic clean-am
+distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
 
 distclean: distclean-recursive
 	-rm -f config.status
 
-maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
+maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
@@ -331,9 +360,9 @@
 	-rm -f config.status
 
-.PHONY: install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+install-data-recursive uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
 maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
 distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
Index: c/src/exec/score/tools/hppa1.1/Makefile.in
===================================================================
--- c/src/exec/score/tools/hppa1.1/Makefile.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/exec/score/tools/hppa1.1/Makefile.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,7 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
+# gives unlimited permission to copy, distribute and modify it.
 
 #
@@ -16,13 +10,5 @@
 
 
-# $Id$
-
-# NOTE: This is a temporary work-around to keep 
-# "make debug" and "make debug_install" working.
-# Once automake is fully integrated these make targets 
-# and this file will probably be removed
-
-
-SHELL = @SHELL@
+SHELL = /bin/sh
 
 srcdir = @srcdir@
@@ -45,6 +31,4 @@
 oldincludedir = /usr/include
 
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -57,15 +41,15 @@
 
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 transform = @program_transform_name@
 
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
+NORMAL_INSTALL = true
+PRE_INSTALL = true
+POST_INSTALL = true
+NORMAL_UNINSTALL = true
+PRE_UNINSTALL = true
+POST_UNINSTALL = true
 build_alias = @build_alias@
 build_triplet = @build@
@@ -88,15 +72,16 @@
 ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal
 
-noinst_PROGRAMS = genoffsets
-
-genoffsets_SOURCES =  genoffsets.c
-
+noinst_PROGRAMS=genoffsets
+
+genoffsets_SOURCES = \
+genoffsets.c
 
 # We use files that have not been installed yet.
 
-CPU_DIR = ../../cpu/$(RTEMS_CPU)
-
-INCLUDES =  -I$(PROJECT_INCLUDE) -I$(CPU_DIR)
-
+CPU_DIR=../../cpu/$(RTEMS_CPU)
+
+INCLUDES = \
+-I$(PROJECT_INCLUDE) \
+-I$(CPU_DIR)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
@@ -111,10 +96,8 @@
 genoffsets_OBJECTS =  genoffsets.o
 genoffsets_LDADD = $(LDADD)
-genoffsets_DEPENDENCIES = 
 genoffsets_LDFLAGS = 
 CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
 DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
 
@@ -123,16 +106,17 @@
 
 TAR = tar
-GZIP_ENV = --best
+GZIP = --best
 DEP_FILES =  .deps/genoffsets.P
 SOURCES = $(genoffsets_SOURCES)
 OBJECTS = $(genoffsets_OBJECTS)
 
-all: all-redirect
+default: all
+
 .SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../automake/local.am
+.SUFFIXES: .c .o
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
 	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
 	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
@@ -141,5 +125,5 @@
 	cd $(srcdir) && $(ACLOCAL)
 
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+config.status: $(srcdir)/configure
 	$(SHELL) ./config.status --recheck
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
@@ -149,5 +133,5 @@
 
 clean-noinstPROGRAMS:
-	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+	test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
 
 distclean-noinstPROGRAMS:
@@ -155,17 +139,14 @@
 maintainer-clean-noinstPROGRAMS:
 
-.s.o:
+.c.o:
 	$(COMPILE) -c $<
 
-.S.o:
-	$(COMPILE) -c $<
-
 mostlyclean-compile:
-	-rm -f *.o core *.core
+	rm -f *.o core
 
 clean-compile:
 
 distclean-compile:
-	-rm -f *.tab.c
+	rm -f *.tab.c
 
 maintainer-clean-compile:
@@ -177,21 +158,12 @@
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+ID: $(HEADERS) $(SOURCES)
+	here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+	test -z "$(ETAGS_ARGS)$(SOURCES)$(HEADERS)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $(SOURCES) $(HEADERS) -o $$here/TAGS)
 
 mostlyclean-tags:
@@ -200,5 +172,5 @@
 
 distclean-tags:
-	-rm -f TAGS ID
+	rm -f TAGS ID
 
 maintainer-clean-tags:
@@ -211,6 +183,6 @@
 # tarfile.
 distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
 	mkdir $(distdir)/=build
 	mkdir $(distdir)/=inst
@@ -218,45 +190,43 @@
 	cd $(distdir)/=build \
 	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
+	  && $(MAKE) \
+	  && $(MAKE) dvi \
+	  && $(MAKE) check \
+	  && $(MAKE) install \
+	  && $(MAKE) installcheck \
+	  && $(MAKE) dist
+	rm -rf $(distdir)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
 dist: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 dist-all: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 distdir: $(DISTFILES)
-	-rm -rf $(distdir)
+	rm -rf $(distdir)
 	mkdir $(distdir)
 	-chmod 777 $(distdir)
 	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
 	cd $(top_srcdir) \
 	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
 	@for file in $(DISTFILES); do \
 	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
+	  test -f $(distdir)/$$file \
+	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	  || cp -p $$d/$$file $(distdir)/$$file; \
 	done
 
+MKDEP = gcc -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+
 DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+-include .deps/.P
+.deps/.P: $(BUILT_SOURCES)
+	echo > $@
 
 -include $(DEP_FILES)
@@ -267,99 +237,79 @@
 
 distclean-depend:
-	-rm -rf .deps
 
 maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am: all-am
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am: install-exec-local
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS)
-all-redirect: all-am
+	rm -rf .deps
+
+.deps/%.P: %.c
+	@echo "Computing dependencies for $<..."
+	@o='o'; \
+	test -n "$o" && o='$$o'; \
+	$(MKDEP) $< >$@.tmp \
+	  && sed "s,^\(.*\)\.o:,\1.$$o \1.l$$o $@:," < $@.tmp > $@ \
+	  && rm -f $@.tmp
+info:
+dvi:
+check: all
+	$(MAKE)
+installcheck:
+install-exec: install-exec-local
+	@$(NORMAL_INSTALL)
+
+install-data: 
+	@$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+	@:
+
+uninstall: 
+
+all: Makefile $(PROGRAMS)
+
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
 installdirs:
 
 
 mostlyclean-generic:
+	test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 
 clean-generic:
+	test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	rm -f Makefile $(DISTCLEANFILES)
+	rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstPROGRAMS mostlyclean-compile \
+	test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean:  mostlyclean-noinstPROGRAMS mostlyclean-compile \
 		mostlyclean-tags mostlyclean-depend mostlyclean-generic
 
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstPROGRAMS clean-compile clean-tags clean-depend \
-		clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstPROGRAMS distclean-compile distclean-tags \
-		distclean-depend distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstPROGRAMS \
+clean:  clean-noinstPROGRAMS clean-compile clean-tags clean-depend \
+		clean-generic mostlyclean
+
+distclean:  distclean-noinstPROGRAMS distclean-compile distclean-tags \
+		distclean-depend distclean-generic clean
+	rm -f config.status
+
+maintainer-clean:  maintainer-clean-noinstPROGRAMS \
 		maintainer-clean-compile maintainer-clean-tags \
 		maintainer-clean-depend maintainer-clean-generic \
-		distclean-am
+		distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
+	rm -f config.status
+
+.PHONY: default mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
 clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
 mostlyclean-compile distclean-compile clean-compile \
 maintainer-clean-compile tags mostlyclean-tags distclean-tags \
 clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info-am info \
-dvi-am dvi check check-am installcheck-am installcheck \
-install-exec-local install-exec-am install-exec install-data-am \
-install-data install-am install uninstall-am uninstall all-redirect \
-all-am all installdirs mostlyclean-generic distclean-generic \
-clean-generic maintainer-clean-generic clean mostlyclean distclean \
-maintainer-clean
+distclean-depend clean-depend maintainer-clean-depend info dvi \
+installcheck install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
 
 
@@ -371,21 +321,5 @@
 	$(INSTALL_PROGRAM) genoffsets ${PROJECT_ROOT}/${RTEMS_BSP}/bin
 
-debug-am:
-
-debug: debug-am
-
-debug_install-am:
-
-debug_install: debug_install-am
-
-profile-am:
-
-profile: profile-am
-
-profile_install-am:
-
-profile_install: profile_install-am
-
-.PHONY: debug debug_install profile profile_install
+include $(top_srcdir)/../../../../../../automake/local.am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
Index: c/src/exec/score/tools/hppa1.1/aclocal.m4
===================================================================
--- c/src/exec/score/tools/hppa1.1/aclocal.m4	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/exec/score/tools/hppa1.1/aclocal.m4	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,3 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+dnl aclocal.m4 generated automatically by aclocal 1.2
 
 dnl $Id$
@@ -100,5 +90,5 @@
 
 AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
+[AC_REQUIRE([AM_PROG_INSTALL])
 PACKAGE=[$1]
 AC_SUBST(PACKAGE)
@@ -110,8 +100,8 @@
 fi
 ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AM_SANITY_CHECK
+AC_ARG_PROGRAM
 dnl FIXME This is truly gross.
 missing_dir=`cd $ac_aux_dir && pwd`
@@ -121,5 +111,14 @@
 AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
 AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+AC_PROG_MAKE_SET])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
 
 #
@@ -139,19 +138,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
+   if test "$@" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
    test "[$]2" = conftestfile
    )
Index: c/src/exec/score/tools/hppa1.1/configure
===================================================================
--- c/src/exec/score/tools/hppa1.1/configure	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/exec/score/tools/hppa1.1/configure	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -2,5 +2,5 @@
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
@@ -50,5 +50,4 @@
 subdirs=
 MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
@@ -334,5 +333,5 @@
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
@@ -504,9 +503,7 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-ac_exeext=
-ac_objext=o
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -549,5 +546,5 @@
 
 echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
-echo "configure:552: checking for RTEMS Version" >&5
+echo "configure:549: checking for RTEMS Version" >&5
 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
 RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
@@ -585,10 +582,10 @@
 
 # Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:593: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
@@ -597,5 +594,5 @@
   case $nonopt in
   NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    if host_alias=`$ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
@@ -604,5 +601,5 @@
 esac
 
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host=`$ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -611,5 +608,5 @@
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:614: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
@@ -622,5 +619,5 @@
 esac
 
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target=`$ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -629,5 +626,5 @@
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:632: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
@@ -640,5 +637,5 @@
 esac
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build=`$ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -654,5 +651,5 @@
 
 echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:657: checking rtems target cpu" >&5
+echo "configure:654: checking rtems target cpu" >&5
 case "${target}" in
   # hpux unix port should go here
@@ -689,15 +686,14 @@
 # IRIX /sbin/install
 # AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:693: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
     # Account for people who put trailing slashes in PATH elements.
@@ -706,11 +702,10 @@
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
+      for ac_prog in ginstall installbsd scoinst install; do
         if test -f $ac_dir/$ac_prog; then
 	  if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
+	    # OSF/1 installbsd also uses dspmsg, but is usable.
 	    :
 	  else
@@ -742,10 +737,20 @@
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+PACKAGE=rtems-exec-score-tools-hppa
+
+VERSION=$RTEMS_VERSION
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:750: checking whether build environment is sane" >&5
+echo "configure:755: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
@@ -758,19 +763,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
+   if test "" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
    test "$2" = conftestfile
    )
@@ -803,6 +797,72 @@
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:802: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal
+   echo "$ac_t""found" 1>&6
+else
+   ACLOCAL="$missing_dir/missing aclocal"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:815: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   echo "$ac_t""found" 1>&6
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:828: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake
+   echo "$ac_t""found" 1>&6
+else
+   AUTOMAKE="$missing_dir/missing automake"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:841: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   echo "$ac_t""found" 1>&6
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:854: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   echo "$ac_t""found" 1>&6
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   echo "$ac_t""missing" 1>&6
+fi
+
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:807: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:867: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
@@ -831,86 +891,8 @@
 
 
-PACKAGE=rtems-exec-score-tools-hppa
-
-VERSION=$RTEMS_VERSION
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:846: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:859: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:872: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:885: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:898: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:915: checking for $ac_word" >&5
+echo "configure:897: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -919,7 +901,6 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -942,5 +923,5 @@
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:945: checking for $ac_word" >&5
+echo "configure:926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -949,8 +930,7 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -987,43 +967,9 @@
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1028: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
@@ -1031,15 +977,13 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-cat > conftest.$ac_ext << EOF
-
-#line 1039 "configure"
+cat > conftest.$ac_ext <<EOF
+#line 984 "configure"
 #include "confdefs.h"
-
 main(){return(0);}
 EOF
-if { (eval echo configure:1044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
@@ -1055,10 +999,4 @@
 fi
 rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
@@ -1067,10 +1005,10 @@
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1070: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1075: checking whether we are using GNU C" >&5
+echo "configure:1013: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1081,5 +1019,5 @@
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
@@ -1092,13 +1030,9 @@
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1103: checking whether ${CC-cc} accepts -g" >&5
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1037: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1115,18 +1049,14 @@
 
 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
     CFLAGS="-g -O2"
   else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
     CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
 fi
 
@@ -1171,5 +1101,5 @@
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  case `(ac_space=' '; set) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
@@ -1250,5 +1180,5 @@
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
@@ -1270,9 +1200,7 @@
 $ac_vpsub
 $extrasub
-s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
@@ -1311,6 +1239,6 @@
 s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@PACKAGE@%$PACKAGE%g
 s%@VERSION@%$VERSION%g
Index: c/src/exec/score/tools/sh/Makefile.in
===================================================================
--- c/src/exec/score/tools/sh/Makefile.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/exec/score/tools/sh/Makefile.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,7 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
+# gives unlimited permission to copy, distribute and modify it.
 
 #
@@ -16,13 +10,5 @@
 
 
-# $Id$
-
-# NOTE: This is a temporary work-around to keep 
-# "make debug" and "make debug_install" working.
-# Once automake is fully integrated these make targets 
-# and this file will probably be removed
-
-
-SHELL = @SHELL@
+SHELL = /bin/sh
 
 srcdir = @srcdir@
@@ -45,6 +31,4 @@
 oldincludedir = /usr/include
 
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -57,15 +41,15 @@
 
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 transform = @program_transform_name@
 
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
+NORMAL_INSTALL = true
+PRE_INSTALL = true
+POST_INSTALL = true
+NORMAL_UNINSTALL = true
+PRE_UNINSTALL = true
+POST_UNINSTALL = true
 build_alias = @build_alias@
 build_triplet = @build@
@@ -88,8 +72,10 @@
 ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal
 
-noinst_PROGRAMS = shgen
-
-shgen_SOURCES =  sci.h sci.c shgen.c
-
+noinst_PROGRAMS=shgen
+
+shgen_SOURCES = \
+sci.h \
+sci.c \
+shgen.c
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
@@ -104,10 +90,8 @@
 shgen_OBJECTS =  sci.o shgen.o
 shgen_LDADD = $(LDADD)
-shgen_DEPENDENCIES = 
 shgen_LDFLAGS = 
 CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
 DIST_COMMON =  AUTHORS COPYING Makefile.am Makefile.in TODO aclocal.m4 \
 configure configure.in
@@ -117,16 +101,17 @@
 
 TAR = tar
-GZIP_ENV = --best
+GZIP = --best
 DEP_FILES =  .deps/sci.P .deps/shgen.P
 SOURCES = $(shgen_SOURCES)
 OBJECTS = $(shgen_OBJECTS)
 
-all: all-redirect
+default: all
+
 .SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../automake/local.am
+.SUFFIXES: .c .o
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
 	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
 	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
@@ -135,5 +120,5 @@
 	cd $(srcdir) && $(ACLOCAL)
 
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+config.status: $(srcdir)/configure
 	$(SHELL) ./config.status --recheck
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
@@ -143,5 +128,5 @@
 
 clean-noinstPROGRAMS:
-	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+	test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
 
 distclean-noinstPROGRAMS:
@@ -149,17 +134,14 @@
 maintainer-clean-noinstPROGRAMS:
 
-.s.o:
+.c.o:
 	$(COMPILE) -c $<
 
-.S.o:
-	$(COMPILE) -c $<
-
 mostlyclean-compile:
-	-rm -f *.o core *.core
+	rm -f *.o core
 
 clean-compile:
 
 distclean-compile:
-	-rm -f *.tab.c
+	rm -f *.tab.c
 
 maintainer-clean-compile:
@@ -171,21 +153,12 @@
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+ID: $(HEADERS) $(SOURCES)
+	here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+	test -z "$(ETAGS_ARGS)$(SOURCES)$(HEADERS)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $(SOURCES) $(HEADERS) -o $$here/TAGS)
 
 mostlyclean-tags:
@@ -194,5 +167,5 @@
 
 distclean-tags:
-	-rm -f TAGS ID
+	rm -f TAGS ID
 
 maintainer-clean-tags:
@@ -205,6 +178,6 @@
 # tarfile.
 distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
 	mkdir $(distdir)/=build
 	mkdir $(distdir)/=inst
@@ -212,45 +185,43 @@
 	cd $(distdir)/=build \
 	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
+	  && $(MAKE) \
+	  && $(MAKE) dvi \
+	  && $(MAKE) check \
+	  && $(MAKE) install \
+	  && $(MAKE) installcheck \
+	  && $(MAKE) dist
+	rm -rf $(distdir)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
 dist: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 dist-all: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 distdir: $(DISTFILES)
-	-rm -rf $(distdir)
+	rm -rf $(distdir)
 	mkdir $(distdir)
 	-chmod 777 $(distdir)
 	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
 	cd $(top_srcdir) \
 	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
 	@for file in $(DISTFILES); do \
 	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
+	  test -f $(distdir)/$$file \
+	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	  || cp -p $$d/$$file $(distdir)/$$file; \
 	done
 
+MKDEP = gcc -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+
 DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+-include .deps/.P
+.deps/.P: $(BUILT_SOURCES)
+	echo > $@
 
 -include $(DEP_FILES)
@@ -261,117 +232,82 @@
 
 distclean-depend:
-	-rm -rf .deps
 
 maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am: all-am
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS)
-all-redirect: all-am
+	rm -rf .deps
+
+.deps/%.P: %.c
+	@echo "Computing dependencies for $<..."
+	@o='o'; \
+	test -n "$o" && o='$$o'; \
+	$(MKDEP) $< >$@.tmp \
+	  && sed "s,^\(.*\)\.o:,\1.$$o \1.l$$o $@:," < $@.tmp > $@ \
+	  && rm -f $@.tmp
+info:
+dvi:
+check: all
+	$(MAKE)
+installcheck:
+install-exec: 
+	@$(NORMAL_INSTALL)
+
+install-data: 
+	@$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+	@:
+
+uninstall: 
+
+all: Makefile $(PROGRAMS)
+
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
 installdirs:
 
 
 mostlyclean-generic:
+	test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 
 clean-generic:
+	test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	rm -f Makefile $(DISTCLEANFILES)
+	rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstPROGRAMS mostlyclean-compile \
+	test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean:  mostlyclean-noinstPROGRAMS mostlyclean-compile \
 		mostlyclean-tags mostlyclean-depend mostlyclean-generic
 
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstPROGRAMS clean-compile clean-tags clean-depend \
-		clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstPROGRAMS distclean-compile distclean-tags \
-		distclean-depend distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstPROGRAMS \
+clean:  clean-noinstPROGRAMS clean-compile clean-tags clean-depend \
+		clean-generic mostlyclean
+
+distclean:  distclean-noinstPROGRAMS distclean-compile distclean-tags \
+		distclean-depend distclean-generic clean
+	rm -f config.status
+
+maintainer-clean:  maintainer-clean-noinstPROGRAMS \
 		maintainer-clean-compile maintainer-clean-tags \
 		maintainer-clean-depend maintainer-clean-generic \
-		distclean-am
+		distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
+	rm -f config.status
+
+.PHONY: default mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
 clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
 mostlyclean-compile distclean-compile clean-compile \
 maintainer-clean-compile tags mostlyclean-tags distclean-tags \
 clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
+distclean-depend clean-depend maintainer-clean-depend info dvi \
+installcheck install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
 maintainer-clean-generic clean mostlyclean distclean maintainer-clean
 
 
-debug-am:
-
-debug: debug-am
-
-debug_install-am:
-
-debug_install: debug_install-am
-
-profile-am:
-
-profile: profile-am
-
-profile_install-am:
-
-profile_install: profile_install-am
-
-.PHONY: debug debug_install profile profile_install
+include $(top_srcdir)/../../../../../../automake/local.am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
Index: c/src/exec/score/tools/sh/aclocal.m4
===================================================================
--- c/src/exec/score/tools/sh/aclocal.m4	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/exec/score/tools/sh/aclocal.m4	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,3 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+dnl aclocal.m4 generated automatically by aclocal 1.2
 
 dnl $Id$
@@ -100,5 +90,5 @@
 
 AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
+[AC_REQUIRE([AM_PROG_INSTALL])
 PACKAGE=[$1]
 AC_SUBST(PACKAGE)
@@ -110,8 +100,8 @@
 fi
 ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AM_SANITY_CHECK
+AC_ARG_PROGRAM
 dnl FIXME This is truly gross.
 missing_dir=`cd $ac_aux_dir && pwd`
@@ -121,5 +111,14 @@
 AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
 AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+AC_PROG_MAKE_SET])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
 
 #
@@ -139,19 +138,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
+   if test "$@" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
    test "[$]2" = conftestfile
    )
Index: c/src/exec/score/tools/sh/configure
===================================================================
--- c/src/exec/score/tools/sh/configure	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/exec/score/tools/sh/configure	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -2,5 +2,5 @@
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
@@ -50,5 +50,4 @@
 subdirs=
 MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
@@ -334,5 +333,5 @@
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
@@ -504,9 +503,7 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-ac_exeext=
-ac_objext=o
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -549,5 +546,5 @@
 
 echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
-echo "configure:552: checking for RTEMS Version" >&5
+echo "configure:549: checking for RTEMS Version" >&5
 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
 RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
@@ -585,10 +582,10 @@
 
 # Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:593: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
@@ -597,5 +594,5 @@
   case $nonopt in
   NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    if host_alias=`$ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
@@ -604,5 +601,5 @@
 esac
 
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host=`$ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -611,5 +608,5 @@
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:614: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
@@ -622,5 +619,5 @@
 esac
 
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target=`$ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -629,5 +626,5 @@
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:632: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
@@ -640,5 +637,5 @@
 esac
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build=`$ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -654,5 +651,5 @@
 
 echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:657: checking rtems target cpu" >&5
+echo "configure:654: checking rtems target cpu" >&5
 case "${target}" in
   # hpux unix port should go here
@@ -689,15 +686,14 @@
 # IRIX /sbin/install
 # AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:693: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
     # Account for people who put trailing slashes in PATH elements.
@@ -706,11 +702,10 @@
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
+      for ac_prog in ginstall installbsd scoinst install; do
         if test -f $ac_dir/$ac_prog; then
 	  if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
+	    # OSF/1 installbsd also uses dspmsg, but is usable.
 	    :
 	  else
@@ -742,10 +737,20 @@
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+PACKAGE=rtems-exec-score-tools-sh
+
+VERSION=$RTEMS_VERSION
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:750: checking whether build environment is sane" >&5
+echo "configure:755: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
@@ -758,19 +763,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
+   if test "" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
    test "$2" = conftestfile
    )
@@ -803,45 +797,7 @@
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:807: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-PACKAGE=rtems-exec-score-tools-sh
-
-VERSION=$RTEMS_VERSION
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-
-
-
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:846: checking for working aclocal" >&5
+echo "configure:802: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -856,5 +812,5 @@
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:859: checking for working autoconf" >&5
+echo "configure:815: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -869,5 +825,5 @@
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:872: checking for working automake" >&5
+echo "configure:828: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -882,5 +838,5 @@
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:885: checking for working autoheader" >&5
+echo "configure:841: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -895,5 +851,5 @@
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:898: checking for working makeinfo" >&5
+echo "configure:854: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -907,4 +863,30 @@
 fi
 
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:867: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
 
 
@@ -912,5 +894,5 @@
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:915: checking for $ac_word" >&5
+echo "configure:897: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -919,7 +901,6 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -942,5 +923,5 @@
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:945: checking for $ac_word" >&5
+echo "configure:926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -949,8 +930,7 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -987,43 +967,9 @@
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1028: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
@@ -1031,15 +977,13 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-cat > conftest.$ac_ext << EOF
-
-#line 1039 "configure"
+cat > conftest.$ac_ext <<EOF
+#line 984 "configure"
 #include "confdefs.h"
-
 main(){return(0);}
 EOF
-if { (eval echo configure:1044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
@@ -1055,10 +999,4 @@
 fi
 rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
@@ -1067,10 +1005,10 @@
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1070: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1075: checking whether we are using GNU C" >&5
+echo "configure:1013: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1081,5 +1019,5 @@
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
@@ -1092,13 +1030,9 @@
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1103: checking whether ${CC-cc} accepts -g" >&5
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1037: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1115,22 +1049,18 @@
 
 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
     CFLAGS="-g -O2"
   else
-    CFLAGS="-g"
+    CFLAGS="-O2"
   fi
 else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
 fi
 
 echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:1135: checking for fabs in -lm" >&5
+echo "configure:1065: checking for fabs in -lm" >&5
 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
@@ -1140,5 +1070,5 @@
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1143 "configure"
+#line 1073 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
@@ -1151,5 +1081,5 @@
 ; return 0; }
 EOF
-if { (eval echo configure:1154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
@@ -1218,5 +1148,5 @@
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  case `(ac_space=' '; set) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
@@ -1297,5 +1227,5 @@
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
@@ -1317,9 +1247,7 @@
 $ac_vpsub
 $extrasub
-s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
@@ -1358,6 +1286,6 @@
 s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@PACKAGE@%$PACKAGE%g
 s%@VERSION@%$VERSION%g
Index: c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in
===================================================================
--- c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/lib/libbsp/hppa1.1/simhppa/tools/Makefile.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,7 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
+# gives unlimited permission to copy, distribute and modify it.
 
 #
@@ -16,13 +10,5 @@
 
 
-# $Id$
-
-# NOTE: This is a temporary work-around to keep 
-# "make debug" and "make debug_install" working.
-# Once automake is fully integrated these make targets 
-# and this file will probably be removed
-
-
-SHELL = @SHELL@
+SHELL = /bin/sh
 
 srcdir = @srcdir@
@@ -45,6 +31,4 @@
 oldincludedir = /usr/include
 
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -57,15 +41,15 @@
 
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 transform = @program_transform_name@
 
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
+NORMAL_INSTALL = true
+PRE_INSTALL = true
+POST_INSTALL = true
+NORMAL_UNINSTALL = true
+PRE_UNINSTALL = true
+POST_UNINSTALL = true
 build_alias = @build_alias@
 build_triplet = @build@
@@ -84,9 +68,9 @@
 ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal
 
-noinst_PROGRAMS =  print_dump
-
-
-print_dump_SOURCES =  print_dump.c
-
+noinst_PROGRAMS= \
+print_dump
+
+print_dump_SOURCES= \
+print_dump.c
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../../mkinstalldirs
@@ -102,12 +86,10 @@
 print_dump_OBJECTS =  print_dump.o
 print_dump_LDADD = $(LDADD)
-print_dump_DEPENDENCIES = 
 print_dump_LDFLAGS = 
 CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  ./stamp-h.in Makefile.am Makefile.in aclocal.m4 \
-config.h.in configure configure.in
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 config.h.in configure \
+configure.in stamp-h.in
 
 
@@ -115,16 +97,17 @@
 
 TAR = tar
-GZIP_ENV = --best
+GZIP = --best
 DEP_FILES =  .deps/print_dump.P
 SOURCES = $(print_dump_SOURCES)
 OBJECTS = $(print_dump_OBJECTS)
 
-all: all-redirect
+default: all
+
 .SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../../automake/local.am
+.SUFFIXES: .c .o
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
 	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
 	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
@@ -133,5 +116,5 @@
 	cd $(srcdir) && $(ACLOCAL)
 
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+config.status: $(srcdir)/configure
 	$(SHELL) ./config.status --recheck
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
@@ -139,21 +122,13 @@
 
 config.h: stamp-h
-	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
-	else :; fi
 stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
 	cd $(top_builddir) \
 	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
 	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
+	@echo timestamp > stamp-h
 $(srcdir)/config.h.in: $(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
 $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
 	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+	@echo timestamp > $(srcdir)/stamp-h.in
 
 mostlyclean-hdr:
@@ -162,5 +137,5 @@
 
 distclean-hdr:
-	-rm -f config.h
+	rm -f config.h
 
 maintainer-clean-hdr:
@@ -169,5 +144,5 @@
 
 clean-noinstPROGRAMS:
-	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+	test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
 
 distclean-noinstPROGRAMS:
@@ -175,17 +150,14 @@
 maintainer-clean-noinstPROGRAMS:
 
-.s.o:
+.c.o:
 	$(COMPILE) -c $<
 
-.S.o:
-	$(COMPILE) -c $<
-
 mostlyclean-compile:
-	-rm -f *.o core *.core
+	rm -f *.o core
 
 clean-compile:
 
 distclean-compile:
-	-rm -f *.tab.c
+	rm -f *.tab.c
 
 maintainer-clean-compile:
@@ -197,21 +169,12 @@
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+ID: $(HEADERS) $(SOURCES)
+	here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS)
+
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+	test -z "$(ETAGS_ARGS)config.h.in$(SOURCES)$(HEADERS)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $(SOURCES) $(HEADERS) -o $$here/TAGS)
 
 mostlyclean-tags:
@@ -220,5 +183,5 @@
 
 distclean-tags:
-	-rm -f TAGS ID
+	rm -f TAGS ID
 
 maintainer-clean-tags:
@@ -231,6 +194,6 @@
 # tarfile.
 distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
 	mkdir $(distdir)/=build
 	mkdir $(distdir)/=inst
@@ -238,45 +201,43 @@
 	cd $(distdir)/=build \
 	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
+	  && $(MAKE) \
+	  && $(MAKE) dvi \
+	  && $(MAKE) check \
+	  && $(MAKE) install \
+	  && $(MAKE) installcheck \
+	  && $(MAKE) dist
+	rm -rf $(distdir)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
 dist: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 dist-all: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 distdir: $(DISTFILES)
-	-rm -rf $(distdir)
+	rm -rf $(distdir)
 	mkdir $(distdir)
 	-chmod 777 $(distdir)
 	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
 	cd $(top_srcdir) \
 	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
 	@for file in $(DISTFILES); do \
 	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
+	  test -f $(distdir)/$$file \
+	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	  || cp -p $$d/$$file $(distdir)/$$file; \
 	done
 
+MKDEP = gcc -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+
 DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+-include .deps/.P
+.deps/.P: $(BUILT_SOURCES)
+	echo > $@
 
 -include $(DEP_FILES)
@@ -287,104 +248,80 @@
 
 distclean-depend:
-	-rm -rf .deps
 
 maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am: all-am
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am: install-exec-local
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS) config.h
-all-redirect: all-am
+	rm -rf .deps
+
+.deps/%.P: %.c
+	@echo "Computing dependencies for $<..."
+	@o='o'; \
+	test -n "$o" && o='$$o'; \
+	$(MKDEP) $< >$@.tmp \
+	  && sed "s,^\(.*\)\.o:,\1.$$o \1.l$$o $@:," < $@.tmp > $@ \
+	  && rm -f $@.tmp
+info:
+dvi:
+check: all
+	$(MAKE)
+installcheck:
+install-exec: install-exec-local
+	@$(NORMAL_INSTALL)
+
+install-data: 
+	@$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+	@:
+
+uninstall: 
+
+all: Makefile $(PROGRAMS) config.h
+
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
 installdirs:
 
 
 mostlyclean-generic:
+	test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 
 clean-generic:
+	test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	rm -f Makefile $(DISTCLEANFILES)
+	rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-noinstPROGRAMS \
+	test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean:  mostlyclean-hdr mostlyclean-noinstPROGRAMS \
 		mostlyclean-compile mostlyclean-tags mostlyclean-depend \
 		mostlyclean-generic
 
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-hdr clean-noinstPROGRAMS clean-compile clean-tags \
-		clean-depend clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-hdr distclean-noinstPROGRAMS distclean-compile \
-		distclean-tags distclean-depend distclean-generic \
-		clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr \
-		maintainer-clean-noinstPROGRAMS \
+clean:  clean-hdr clean-noinstPROGRAMS clean-compile clean-tags \
+		clean-depend clean-generic mostlyclean
+
+distclean:  distclean-hdr distclean-noinstPROGRAMS distclean-compile \
+		distclean-tags distclean-depend distclean-generic clean
+	rm -f config.status
+
+maintainer-clean:  maintainer-clean-hdr maintainer-clean-noinstPROGRAMS \
 		maintainer-clean-compile maintainer-clean-tags \
 		maintainer-clean-depend maintainer-clean-generic \
-		distclean-am
+		distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
-clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-local install-exec-am install-exec install-data-am \
-install-data install-am install uninstall-am uninstall all-redirect \
-all-am all installdirs mostlyclean-generic distclean-generic \
+	rm -f config.status
+
+.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \
+maintainer-clean-hdr mostlyclean-noinstPROGRAMS \
+distclean-noinstPROGRAMS clean-noinstPROGRAMS \
+maintainer-clean-noinstPROGRAMS mostlyclean-compile distclean-compile \
+clean-compile maintainer-clean-compile tags mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir \
+mostlyclean-depend distclean-depend clean-depend \
+maintainer-clean-depend info dvi installcheck install-exec install-data \
+install uninstall all installdirs mostlyclean-generic distclean-generic \
 clean-generic maintainer-clean-generic clean mostlyclean distclean \
 maintainer-clean
@@ -396,21 +333,5 @@
 	$(INSTALL_PROGRAM) print_dump $(PROJECT_ROOT)/${RTEMS_BSP}/bin
 
-debug-am:
-
-debug: debug-am
-
-debug_install-am:
-
-debug_install: debug_install-am
-
-profile-am:
-
-profile: profile-am
-
-profile_install-am:
-
-profile_install: profile_install-am
-
-.PHONY: debug debug_install profile profile_install
+include $(top_srcdir)/../../../../../../../automake/local.am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
Index: c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4
===================================================================
--- c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/lib/libbsp/hppa1.1/simhppa/tools/aclocal.m4	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,3 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+dnl aclocal.m4 generated automatically by aclocal 1.2
 
 dnl $Id$
@@ -100,5 +90,5 @@
 
 AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
+[AC_REQUIRE([AM_PROG_INSTALL])
 PACKAGE=[$1]
 AC_SUBST(PACKAGE)
@@ -110,8 +100,8 @@
 fi
 ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AM_SANITY_CHECK
+AC_ARG_PROGRAM
 dnl FIXME This is truly gross.
 missing_dir=`cd $ac_aux_dir && pwd`
@@ -121,5 +111,14 @@
 AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
 AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+AC_PROG_MAKE_SET])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
 
 #
@@ -139,19 +138,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
+   if test "$@" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
    test "[$]2" = conftestfile
    )
Index: c/src/lib/libbsp/hppa1.1/simhppa/tools/configure
===================================================================
--- c/src/lib/libbsp/hppa1.1/simhppa/tools/configure	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/lib/libbsp/hppa1.1/simhppa/tools/configure	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -2,5 +2,5 @@
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
@@ -50,5 +50,4 @@
 subdirs=
 MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
@@ -334,5 +333,5 @@
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
@@ -504,9 +503,7 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-ac_exeext=
-ac_objext=o
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -549,5 +546,5 @@
 
 echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
-echo "configure:552: checking for RTEMS Version" >&5
+echo "configure:549: checking for RTEMS Version" >&5
 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
 RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
@@ -585,10 +582,10 @@
 
 # Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:593: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
@@ -597,5 +594,5 @@
   case $nonopt in
   NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    if host_alias=`$ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
@@ -604,5 +601,5 @@
 esac
 
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host=`$ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -611,5 +608,5 @@
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:614: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
@@ -622,5 +619,5 @@
 esac
 
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target=`$ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -629,5 +626,5 @@
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:632: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
@@ -640,5 +637,5 @@
 esac
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build=`$ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -654,5 +651,5 @@
 
 echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:657: checking rtems target cpu" >&5
+echo "configure:654: checking rtems target cpu" >&5
 case "${target}" in
   # hpux unix port should go here
@@ -689,15 +686,14 @@
 # IRIX /sbin/install
 # AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:693: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
     # Account for people who put trailing slashes in PATH elements.
@@ -706,11 +702,10 @@
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
+      for ac_prog in ginstall installbsd scoinst install; do
         if test -f $ac_dir/$ac_prog; then
 	  if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
+	    # OSF/1 installbsd also uses dspmsg, but is usable.
 	    :
 	  else
@@ -742,10 +737,20 @@
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+PACKAGE=rtems-lib-libbsp-hppa-simhppa-tools
+
+VERSION=$RTEMS_VERSION
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:750: checking whether build environment is sane" >&5
+echo "configure:755: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
@@ -758,19 +763,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
+   if test "" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
    test "$2" = conftestfile
    )
@@ -803,45 +797,7 @@
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:807: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-PACKAGE=rtems-lib-libbsp-hppa-simhppa-tools
-
-VERSION=$RTEMS_VERSION
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-
-
-
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:846: checking for working aclocal" >&5
+echo "configure:802: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -856,5 +812,5 @@
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:859: checking for working autoconf" >&5
+echo "configure:815: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -869,5 +825,5 @@
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:872: checking for working automake" >&5
+echo "configure:828: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -882,5 +838,5 @@
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:885: checking for working autoheader" >&5
+echo "configure:841: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -895,5 +851,5 @@
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:898: checking for working makeinfo" >&5
+echo "configure:854: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -907,4 +863,30 @@
 fi
 
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:867: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
 
 
@@ -912,5 +894,5 @@
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:915: checking for $ac_word" >&5
+echo "configure:897: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -919,7 +901,6 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -942,5 +923,5 @@
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:945: checking for $ac_word" >&5
+echo "configure:926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -949,8 +930,7 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -987,43 +967,9 @@
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1028: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
@@ -1031,15 +977,13 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-cat > conftest.$ac_ext << EOF
-
-#line 1039 "configure"
+cat > conftest.$ac_ext <<EOF
+#line 984 "configure"
 #include "confdefs.h"
-
 main(){return(0);}
 EOF
-if { (eval echo configure:1044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
@@ -1055,10 +999,4 @@
 fi
 rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
@@ -1067,10 +1005,10 @@
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1070: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1075: checking whether we are using GNU C" >&5
+echo "configure:1013: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1081,5 +1019,5 @@
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
@@ -1092,13 +1030,9 @@
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1103: checking whether ${CC-cc} accepts -g" >&5
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1037: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1115,18 +1049,14 @@
 
 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
     CFLAGS="-g -O2"
   else
-    CFLAGS="-g"
+    CFLAGS="-O2"
   fi
 else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
 fi
 
@@ -1135,10 +1065,10 @@
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1138: checking for $ac_func" >&5
+echo "configure:1068: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1143 "configure"
+#line 1073 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
@@ -1163,5 +1093,5 @@
 ; return 0; }
 EOF
-if { (eval echo configure:1166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
@@ -1214,5 +1144,5 @@
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  case `(ac_space=' '; set) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
@@ -1281,5 +1211,5 @@
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
@@ -1301,9 +1231,7 @@
 $ac_vpsub
 $extrasub
-s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
@@ -1342,6 +1270,6 @@
 s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@PACKAGE@%$PACKAGE%g
 s%@VERSION@%$VERSION%g
Index: c/src/lib/libbsp/hppa1.1/simhppa/tools/stamp-h.in
===================================================================
--- c/src/lib/libbsp/hppa1.1/simhppa/tools/stamp-h.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ c/src/lib/libbsp/hppa1.1/simhppa/tools/stamp-h.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -0,0 +1,1 @@
+timestamp
Index: tools/build/Makefile.in
===================================================================
--- tools/build/Makefile.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ tools/build/Makefile.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -98,5 +98,6 @@
 CONFIG_HEADER = ./src/config.h
 CONFIG_CLEAN_FILES = 
-DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in \
+src/config.h.in src/stamp-h.in
 
 
@@ -121,4 +122,32 @@
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
 	cd $(srcdir) && $(AUTOCONF)
+
+src/config.h: src/stamp-h
+	@if test ! -f $@; then \
+		rm -f src/stamp-h; \
+		$(MAKE) src/stamp-h; \
+	else :; fi
+src/stamp-h: $(srcdir)/src/config.h.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=src/config.h \
+	     $(SHELL) ./config.status
+	@echo timestamp > src/stamp-h 2> /dev/null
+$(srcdir)/src/config.h.in: $(srcdir)/src/stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/src/stamp-h.in; \
+		$(MAKE) $(srcdir)/src/stamp-h.in; \
+	else :; fi
+$(srcdir)/src/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@echo timestamp > $(srcdir)/src/stamp-h.in 2> /dev/null
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f src/config.h
+
+maintainer-clean-hdr:
 
 # This directory's subdirectories are mostly independent; you can cd
@@ -310,19 +339,19 @@
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-tags mostlyclean-generic
+mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
 
 mostlyclean: mostlyclean-recursive
 
-clean-am:  clean-tags clean-generic mostlyclean-am
+clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
 
 clean: clean-recursive
 
-distclean-am:  distclean-tags distclean-generic clean-am
+distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
 
 distclean: distclean-recursive
 	-rm -f config.status
 
-maintainer-clean-am:  maintainer-clean-tags maintainer-clean-generic \
-		distclean-am
+maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
@@ -331,9 +360,9 @@
 	-rm -f config.status
 
-.PHONY: install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+install-data-recursive uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
 maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
 distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
Index: tools/cpu/hppa1.1/aclocal.m4
===================================================================
--- tools/cpu/hppa1.1/aclocal.m4	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ tools/cpu/hppa1.1/aclocal.m4	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,3 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+dnl aclocal.m4 generated automatically by aclocal 1.2
 
 dnl $Id$
@@ -100,5 +90,5 @@
 
 AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
+[AC_REQUIRE([AM_PROG_INSTALL])
 PACKAGE=[$1]
 AC_SUBST(PACKAGE)
@@ -110,8 +100,8 @@
 fi
 ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AM_SANITY_CHECK
+AC_ARG_PROGRAM
 dnl FIXME This is truly gross.
 missing_dir=`cd $ac_aux_dir && pwd`
@@ -121,5 +111,14 @@
 AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
 AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+AC_PROG_MAKE_SET])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
 
 #
@@ -139,19 +138,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
+   if test "$@" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
    test "[$]2" = conftestfile
    )
Index: tools/cpu/hppa1.1/configure
===================================================================
--- tools/cpu/hppa1.1/configure	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ tools/cpu/hppa1.1/configure	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -2,5 +2,5 @@
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
@@ -50,5 +50,4 @@
 subdirs=
 MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
@@ -334,5 +333,5 @@
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
@@ -504,9 +503,7 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-ac_exeext=
-ac_objext=o
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -549,5 +546,5 @@
 
 echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
-echo "configure:552: checking for RTEMS Version" >&5
+echo "configure:549: checking for RTEMS Version" >&5
 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
 RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
@@ -585,10 +582,10 @@
 
 # Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:593: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
@@ -597,5 +594,5 @@
   case $nonopt in
   NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    if host_alias=`$ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
@@ -604,5 +601,5 @@
 esac
 
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host=`$ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -611,5 +608,5 @@
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:614: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
@@ -622,5 +619,5 @@
 esac
 
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target=`$ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -629,5 +626,5 @@
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:632: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
@@ -640,5 +637,5 @@
 esac
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build=`$ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -654,5 +651,5 @@
 
 echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:657: checking rtems target cpu" >&5
+echo "configure:654: checking rtems target cpu" >&5
 case "${target}" in
   # hpux unix port should go here
@@ -689,15 +686,14 @@
 # IRIX /sbin/install
 # AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:693: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
     # Account for people who put trailing slashes in PATH elements.
@@ -706,11 +702,10 @@
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
+      for ac_prog in ginstall installbsd scoinst install; do
         if test -f $ac_dir/$ac_prog; then
 	  if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
+	    # OSF/1 installbsd also uses dspmsg, but is usable.
 	    :
 	  else
@@ -742,10 +737,20 @@
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+PACKAGE=rtems-exec-score-tools-hppa
+
+VERSION=$RTEMS_VERSION
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:750: checking whether build environment is sane" >&5
+echo "configure:755: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
@@ -758,19 +763,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
+   if test "" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
    test "$2" = conftestfile
    )
@@ -803,6 +797,72 @@
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:802: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal
+   echo "$ac_t""found" 1>&6
+else
+   ACLOCAL="$missing_dir/missing aclocal"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:815: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   echo "$ac_t""found" 1>&6
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:828: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake
+   echo "$ac_t""found" 1>&6
+else
+   AUTOMAKE="$missing_dir/missing automake"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:841: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   echo "$ac_t""found" 1>&6
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:854: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   echo "$ac_t""found" 1>&6
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   echo "$ac_t""missing" 1>&6
+fi
+
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:807: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:867: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
@@ -831,86 +891,8 @@
 
 
-PACKAGE=rtems-exec-score-tools-hppa
-
-VERSION=$RTEMS_VERSION
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-
-
-
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:846: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
-   ACLOCAL=aclocal
-   echo "$ac_t""found" 1>&6
-else
-   ACLOCAL="$missing_dir/missing aclocal"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:859: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
-   AUTOCONF=autoconf
-   echo "$ac_t""found" 1>&6
-else
-   AUTOCONF="$missing_dir/missing autoconf"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:872: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
-   AUTOMAKE=automake
-   echo "$ac_t""found" 1>&6
-else
-   AUTOMAKE="$missing_dir/missing automake"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:885: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
-   AUTOHEADER=autoheader
-   echo "$ac_t""found" 1>&6
-else
-   AUTOHEADER="$missing_dir/missing autoheader"
-   echo "$ac_t""missing" 1>&6
-fi
-
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:898: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf.  Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
-   MAKEINFO=makeinfo
-   echo "$ac_t""found" 1>&6
-else
-   MAKEINFO="$missing_dir/missing makeinfo"
-   echo "$ac_t""missing" 1>&6
-fi
-
-
-
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:915: checking for $ac_word" >&5
+echo "configure:897: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -919,7 +901,6 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -942,5 +923,5 @@
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:945: checking for $ac_word" >&5
+echo "configure:926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -949,8 +930,7 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -987,43 +967,9 @@
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1028: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
@@ -1031,15 +977,13 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-cat > conftest.$ac_ext << EOF
-
-#line 1039 "configure"
+cat > conftest.$ac_ext <<EOF
+#line 984 "configure"
 #include "confdefs.h"
-
 main(){return(0);}
 EOF
-if { (eval echo configure:1044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
@@ -1055,10 +999,4 @@
 fi
 rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
@@ -1067,10 +1005,10 @@
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1070: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1075: checking whether we are using GNU C" >&5
+echo "configure:1013: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1081,5 +1019,5 @@
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
@@ -1092,13 +1030,9 @@
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1103: checking whether ${CC-cc} accepts -g" >&5
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1037: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1115,18 +1049,14 @@
 
 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
     CFLAGS="-g -O2"
   else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
     CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
+  fi
+else
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
 fi
 
@@ -1171,5 +1101,5 @@
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  case `(ac_space=' '; set) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
@@ -1250,5 +1180,5 @@
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
@@ -1270,9 +1200,7 @@
 $ac_vpsub
 $extrasub
-s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
@@ -1311,6 +1239,6 @@
 s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@PACKAGE@%$PACKAGE%g
 s%@VERSION@%$VERSION%g
Index: tools/cpu/sh/Makefile.in
===================================================================
--- tools/cpu/sh/Makefile.in	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ tools/cpu/sh/Makefile.in	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,7 @@
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
-
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Makefile.in generated automatically by automake 1.2 from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
+# gives unlimited permission to copy, distribute and modify it.
 
 #
@@ -16,13 +10,5 @@
 
 
-# $Id$
-
-# NOTE: This is a temporary work-around to keep 
-# "make debug" and "make debug_install" working.
-# Once automake is fully integrated these make targets 
-# and this file will probably be removed
-
-
-SHELL = @SHELL@
+SHELL = /bin/sh
 
 srcdir = @srcdir@
@@ -45,6 +31,4 @@
 oldincludedir = /usr/include
 
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -57,15 +41,15 @@
 
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 transform = @program_transform_name@
 
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
+NORMAL_INSTALL = true
+PRE_INSTALL = true
+POST_INSTALL = true
+NORMAL_UNINSTALL = true
+PRE_UNINSTALL = true
+POST_UNINSTALL = true
 build_alias = @build_alias@
 build_triplet = @build@
@@ -88,8 +72,10 @@
 ACLOCAL = @ACLOCAL@ -I $(RTEMS_TOPdir)/aclocal
 
-noinst_PROGRAMS = shgen
-
-shgen_SOURCES =  sci.h sci.c shgen.c
-
+noinst_PROGRAMS=shgen
+
+shgen_SOURCES = \
+sci.h \
+sci.c \
+shgen.c
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../../../mkinstalldirs
@@ -104,10 +90,8 @@
 shgen_OBJECTS =  sci.o shgen.o
 shgen_LDADD = $(LDADD)
-shgen_DEPENDENCIES = 
 shgen_LDFLAGS = 
 CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LINK = $(CC) $(CFLAGS) $(LDFLAGS) -o $@
 DIST_COMMON =  AUTHORS COPYING Makefile.am Makefile.in TODO aclocal.m4 \
 configure configure.in
@@ -117,16 +101,17 @@
 
 TAR = tar
-GZIP_ENV = --best
+GZIP = --best
 DEP_FILES =  .deps/sci.P .deps/shgen.P
 SOURCES = $(shgen_SOURCES)
 OBJECTS = $(shgen_OBJECTS)
 
-all: all-redirect
+default: all
+
 .SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/../../../../../../automake/local.am
+.SUFFIXES: .c .o
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
 	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
 	cd $(top_builddir) \
 	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
@@ -135,5 +120,5 @@
 	cd $(srcdir) && $(ACLOCAL)
 
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+config.status: $(srcdir)/configure
 	$(SHELL) ./config.status --recheck
 $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
@@ -143,5 +128,5 @@
 
 clean-noinstPROGRAMS:
-	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+	test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
 
 distclean-noinstPROGRAMS:
@@ -149,17 +134,14 @@
 maintainer-clean-noinstPROGRAMS:
 
-.s.o:
+.c.o:
 	$(COMPILE) -c $<
 
-.S.o:
-	$(COMPILE) -c $<
-
 mostlyclean-compile:
-	-rm -f *.o core *.core
+	rm -f *.o core
 
 clean-compile:
 
 distclean-compile:
-	-rm -f *.tab.c
+	rm -f *.tab.c
 
 maintainer-clean-compile:
@@ -171,21 +153,12 @@
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+ID: $(HEADERS) $(SOURCES)
+	here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+	test -z "$(ETAGS_ARGS)$(SOURCES)$(HEADERS)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $(SOURCES) $(HEADERS) -o $$here/TAGS)
 
 mostlyclean-tags:
@@ -194,5 +167,5 @@
 
 distclean-tags:
-	-rm -f TAGS ID
+	rm -f TAGS ID
 
 maintainer-clean-tags:
@@ -205,6 +178,6 @@
 # tarfile.
 distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
 	mkdir $(distdir)/=build
 	mkdir $(distdir)/=inst
@@ -212,45 +185,43 @@
 	cd $(distdir)/=build \
 	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
+	  && $(MAKE) \
+	  && $(MAKE) dvi \
+	  && $(MAKE) check \
+	  && $(MAKE) install \
+	  && $(MAKE) installcheck \
+	  && $(MAKE) dist
+	rm -rf $(distdir)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
 dist: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 dist-all: distdir
 	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	rm -rf $(distdir)
 distdir: $(DISTFILES)
-	-rm -rf $(distdir)
+	rm -rf $(distdir)
 	mkdir $(distdir)
 	-chmod 777 $(distdir)
 	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
 	cd $(top_srcdir) \
 	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
 	@for file in $(DISTFILES); do \
 	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
+	  test -f $(distdir)/$$file \
+	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	  || cp -p $$d/$$file $(distdir)/$$file; \
 	done
 
+MKDEP = gcc -M $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+
 DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+-include .deps/.P
+.deps/.P: $(BUILT_SOURCES)
+	echo > $@
 
 -include $(DEP_FILES)
@@ -261,117 +232,82 @@
 
 distclean-depend:
-	-rm -rf .deps
 
 maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
-check-am: all-am
-check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
-
-install-data-am:
-install-data: install-data-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS)
-all-redirect: all-am
+	rm -rf .deps
+
+.deps/%.P: %.c
+	@echo "Computing dependencies for $<..."
+	@o='o'; \
+	test -n "$o" && o='$$o'; \
+	$(MKDEP) $< >$@.tmp \
+	  && sed "s,^\(.*\)\.o:,\1.$$o \1.l$$o $@:," < $@.tmp > $@ \
+	  && rm -f $@.tmp
+info:
+dvi:
+check: all
+	$(MAKE)
+installcheck:
+install-exec: 
+	@$(NORMAL_INSTALL)
+
+install-data: 
+	@$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+	@:
+
+uninstall: 
+
+all: Makefile $(PROGRAMS)
+
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
 installdirs:
 
 
 mostlyclean-generic:
+	test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 
 clean-generic:
+	test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	rm -f Makefile $(DISTCLEANFILES)
+	rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-noinstPROGRAMS mostlyclean-compile \
+	test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+	test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+mostlyclean:  mostlyclean-noinstPROGRAMS mostlyclean-compile \
 		mostlyclean-tags mostlyclean-depend mostlyclean-generic
 
-mostlyclean: mostlyclean-am
-
-clean-am:  clean-noinstPROGRAMS clean-compile clean-tags clean-depend \
-		clean-generic mostlyclean-am
-
-clean: clean-am
-
-distclean-am:  distclean-noinstPROGRAMS distclean-compile distclean-tags \
-		distclean-depend distclean-generic clean-am
-
-distclean: distclean-am
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-noinstPROGRAMS \
+clean:  clean-noinstPROGRAMS clean-compile clean-tags clean-depend \
+		clean-generic mostlyclean
+
+distclean:  distclean-noinstPROGRAMS distclean-compile distclean-tags \
+		distclean-depend distclean-generic clean
+	rm -f config.status
+
+maintainer-clean:  maintainer-clean-noinstPROGRAMS \
 		maintainer-clean-compile maintainer-clean-tags \
 		maintainer-clean-depend maintainer-clean-generic \
-		distclean-am
+		distclean
 	@echo "This command is intended for maintainers to use;"
 	@echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-am
-	-rm -f config.status
-
-.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
+	rm -f config.status
+
+.PHONY: default mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
 clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
 mostlyclean-compile distclean-compile clean-compile \
 maintainer-clean-compile tags mostlyclean-tags distclean-tags \
 clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
+distclean-depend clean-depend maintainer-clean-depend info dvi \
+installcheck install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
 maintainer-clean-generic clean mostlyclean distclean maintainer-clean
 
 
-debug-am:
-
-debug: debug-am
-
-debug_install-am:
-
-debug_install: debug_install-am
-
-profile-am:
-
-profile: profile-am
-
-profile_install-am:
-
-profile_install: profile_install-am
-
-.PHONY: debug debug_install profile profile_install
+include $(top_srcdir)/../../../../../../automake/local.am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
Index: tools/cpu/sh/aclocal.m4
===================================================================
--- tools/cpu/sh/aclocal.m4	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ tools/cpu/sh/aclocal.m4	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -1,13 +1,3 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
+dnl aclocal.m4 generated automatically by aclocal 1.2
 
 dnl $Id$
@@ -100,5 +90,5 @@
 
 AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
+[AC_REQUIRE([AM_PROG_INSTALL])
 PACKAGE=[$1]
 AC_SUBST(PACKAGE)
@@ -110,8 +100,8 @@
 fi
 ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AM_SANITY_CHECK
+AC_ARG_PROGRAM
 dnl FIXME This is truly gross.
 missing_dir=`cd $ac_aux_dir && pwd`
@@ -121,5 +111,14 @@
 AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
 AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+AC_PROG_MAKE_SET])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
 
 #
@@ -139,19 +138,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "[$]*" = "X"; then
+   if test "$@" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "[$]*" != "X $srcdir/configure conftestfile" \
-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
    test "[$]2" = conftestfile
    )
Index: tools/cpu/sh/configure
===================================================================
--- tools/cpu/sh/configure	(revision 79800f9ee5fd3ba2e99a0f8715e9dd96f974d31f)
+++ tools/cpu/sh/configure	(revision ecab6a39172022daa2ea7a16d633dcef6155af16)
@@ -2,5 +2,5 @@
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
@@ -50,5 +50,4 @@
 subdirs=
 MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
@@ -334,5 +333,5 @@
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
@@ -504,9 +503,7 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-ac_exeext=
-ac_objext=o
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -549,5 +546,5 @@
 
 echo $ac_n "checking for RTEMS Version""... $ac_c" 1>&6
-echo "configure:552: checking for RTEMS Version" >&5
+echo "configure:549: checking for RTEMS Version" >&5
 if test -r "${srcdir}/${RTEMS_TOPdir}/VERSION"; then
 RTEMS_VERSION=`grep Version ${srcdir}/${RTEMS_TOPdir}/VERSION | \
@@ -585,10 +582,10 @@
 
 # Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:593: checking host system type" >&5
+echo "configure:590: checking host system type" >&5
 
 host_alias=$host
@@ -597,5 +594,5 @@
   case $nonopt in
   NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    if host_alias=`$ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
@@ -604,5 +601,5 @@
 esac
 
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host=`$ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -611,5 +608,5 @@
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:614: checking target system type" >&5
+echo "configure:611: checking target system type" >&5
 
 target_alias=$target
@@ -622,5 +619,5 @@
 esac
 
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target=`$ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -629,5 +626,5 @@
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:632: checking build system type" >&5
+echo "configure:629: checking build system type" >&5
 
 build_alias=$build
@@ -640,5 +637,5 @@
 esac
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build=`$ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
@@ -654,5 +651,5 @@
 
 echo $ac_n "checking rtems target cpu""... $ac_c" 1>&6
-echo "configure:657: checking rtems target cpu" >&5
+echo "configure:654: checking rtems target cpu" >&5
 case "${target}" in
   # hpux unix port should go here
@@ -689,15 +686,14 @@
 # IRIX /sbin/install
 # AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:693: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
     # Account for people who put trailing slashes in PATH elements.
@@ -706,11 +702,10 @@
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
+      for ac_prog in ginstall installbsd scoinst install; do
         if test -f $ac_dir/$ac_prog; then
 	  if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
+	    # OSF/1 installbsd also uses dspmsg, but is usable.
 	    :
 	  else
@@ -742,10 +737,20 @@
 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
 
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+PACKAGE=rtems-exec-score-tools-sh
+
+VERSION=$RTEMS_VERSION
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:750: checking whether build environment is sane" >&5
+echo "configure:755: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
@@ -758,19 +763,8 @@
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$*" = "X"; then
+   if test "" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
-   if test "$*" != "X $srcdir/configure conftestfile" \
-      && test "$*" != "X conftestfile $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
-   fi
-
    test "$2" = conftestfile
    )
@@ -803,45 +797,7 @@
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:807: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftestmake <<\EOF
-all:
-	@echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  SET_MAKE=
-else
-  echo "$ac_t""no" 1>&6
-  SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-PACKAGE=rtems-exec-score-tools-sh
-
-VERSION=$RTEMS_VERSION
-
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
-  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-
-
-
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:846: checking for working aclocal" >&5
+echo "configure:802: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -856,5 +812,5 @@
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:859: checking for working autoconf" >&5
+echo "configure:815: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -869,5 +825,5 @@
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:872: checking for working automake" >&5
+echo "configure:828: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -882,5 +838,5 @@
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:885: checking for working autoheader" >&5
+echo "configure:841: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -895,5 +851,5 @@
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:898: checking for working makeinfo" >&5
+echo "configure:854: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
@@ -907,4 +863,30 @@
 fi
 
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:867: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
 
 
@@ -912,5 +894,5 @@
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:915: checking for $ac_word" >&5
+echo "configure:897: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -919,7 +901,6 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -942,5 +923,5 @@
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:945: checking for $ac_word" >&5
+echo "configure:926: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -949,8 +930,7 @@
   ac_cv_prog_CC="$CC" # Let the user override the test.
 else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
+  for ac_dir in $PATH; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
@@ -987,43 +967,9 @@
 fi
 
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1028: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
@@ -1031,15 +977,13 @@
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
 cross_compiling=$ac_cv_prog_cc_cross
 
-cat > conftest.$ac_ext << EOF
-
-#line 1039 "configure"
+cat > conftest.$ac_ext <<EOF
+#line 984 "configure"
 #include "confdefs.h"
-
 main(){return(0);}
 EOF
-if { (eval echo configure:1044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
@@ -1055,10 +999,4 @@
 fi
 rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
 
 echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
@@ -1067,10 +1005,10 @@
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1070: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1008: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1075: checking whether we are using GNU C" >&5
+echo "configure:1013: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1081,5 +1019,5 @@
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
@@ -1092,13 +1030,9 @@
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1103: checking whether ${CC-cc} accepts -g" >&5
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1037: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1115,22 +1049,18 @@
 
 echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
     CFLAGS="-g -O2"
   else
-    CFLAGS="-g"
+    CFLAGS="-O2"
   fi
 else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
+  GCC=
+  test "${CFLAGS+set}" = set || CFLAGS="-g"
 fi
 
 echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:1135: checking for fabs in -lm" >&5
+echo "configure:1065: checking for fabs in -lm" >&5
 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
@@ -1140,5 +1070,5 @@
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1143 "configure"
+#line 1073 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
@@ -1151,5 +1081,5 @@
 ; return 0; }
 EOF
-if { (eval echo configure:1154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
@@ -1218,5 +1148,5 @@
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  case `(ac_space=' '; set) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
@@ -1297,5 +1227,5 @@
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
@@ -1317,9 +1247,7 @@
 $ac_vpsub
 $extrasub
-s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
 s%@DEFS@%$DEFS%g
 s%@LDFLAGS@%$LDFLAGS%g
@@ -1358,6 +1286,6 @@
 s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@PACKAGE@%$PACKAGE%g
 s%@VERSION@%$VERSION%g
