Changeset d8ff793 in rtems for c/src/lib/libcpu/sh


Ignore:
Timestamp:
03/19/99 22:27:02 (25 years ago)
Author:
Joel Sherrill <joel.sherrill@…>
Branches:
4.10, 4.11, 4.8, 4.9, 5, master
Children:
c0a36429
Parents:
5906ac5
Message:

Towards automake XI patch from Ralf Corsepius <corsepiu@…>:

This patch is the most scary of all proposals I've been mailing to you
this week until now.

It consists of 3 parts:

  1. a patch
  2. a perl script (acpolish)
  3. a shell script wrapper to invoke the perl-script.

The perl-script reads in each Makefile.in and modifies them
("polishes/beautifies" them :-).

These modifications are not easy to describe:

Basically, it hard-codes some automake Makefile-variables and rules into
RTEMS autoconf-Makefile.ins (Note: autoconf vs. automake!!) and converts
some settings/variables to configure scripts' requirements (Yes,
plural).

E.g. it adds the automake standard variables $top_builddir and $subdir,
adds dependency rules for automatic re-generation of Makefiles from
Makefile.in, adds support variables for relative paths to multiple
configure scripts etc.

The patch is a one-line patch to enable the support of the new features
added by acpolish.

The shell script is a wrapper which pokes around inside of the source
tree for Makefile.ins and invokes acpolish on all autoconf-Makefile.ins.

acpolish is designed to be able to run several times on the same
Makefile.in and may once become a more general tool to convert RTEMS
Makefile.in to automake. Therefore, I'd like to keep it inside of source
tree. (e.g. as contrib/acpolish or c/update-tools/acpolish). However, it
doesn't make sense to export it outside of RTEMS.

To apply this:

cd <source-tree>
patch -p1 -E < <path-to-patch>/rtems-rc-19990318-1.diff
tar xzvf <path-to>/rtems-rc-polish.tar.gz
./rtems-polish.sh
./autogen

Note: The path contrib/acpolish is hard-coded into rtems-polish.sh, if
you decide to put it in an alternative place, please modify
rtems-polish.sh to reflect this change.

Later:
cvs rm make/rtems.cfg (It isn't used anymore)
cvs add contrib
cvs add contrib/acpolish
cvs commit

I've tested this intensively, but naturally I can't exclude bugs.

Ralf.

PS.: Most probably, this is the last "Towards automake" patch. The next
one probably will be a real automake patch.

Location:
c/src/lib/libcpu/sh
Files:
7 edited

Legend:

Unmodified
Added
Removed

  • c/src/lib/libcpu/sh/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH=@srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../..
     9subdir = c/src/lib/libcpu/sh
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH=@srcdir@
    1217
    1318include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
    … …  
    1520
    1621SUB_DIRS=$(wildcard $(RTEMS_CPU_MODEL))
     22
     23Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     24        cd $(top_builddir) \
     25         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

  • c/src/lib/libcpu/sh/sh7032/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH=@srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../../..
     9subdir = c/src/lib/libcpu/sh/sh7032
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH=@srcdir@
    1217
    1318include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
    … …  
    1520
    1621SUB_DIRS=include clock console timer null
     22
     23Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     24        cd $(top_builddir) \
     25         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

  • c/src/lib/libcpu/sh/sh7032/clock/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH=@srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../../../..
     9subdir = c/src/lib/libcpu/sh/sh7032/clock
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH=@srcdir@
    1217
    1318PGM=${ARCH}/clock.rel
    … …  
    6166#    libbsp/sh/BSP/wrapup/Makefile
    6267install:  all
     68
     69Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     70        cd $(top_builddir) \
     71         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

  • c/src/lib/libcpu/sh/sh7032/console/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH=@srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../../../..
     9subdir = c/src/lib/libcpu/sh/sh7032/console
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH=@srcdir@
    1217
    1318PGM=${ARCH}/console.rel
    … …  
    6166#       libbsp/sh/BSP/wrapup/Makefile
    6267install:  all
     68
     69Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     70        cd $(top_builddir) \
     71         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

  • c/src/lib/libcpu/sh/sh7032/include/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH=@srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../../../..
     9subdir = c/src/lib/libcpu/sh/sh7032/include
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH=@srcdir@
    1217
    1318H_FILES = $(wildcard $(srcdir)/*.h)
    … …  
    2934        test -d $(PROJECT_INCLUDE)/sh || $(MKDIR) $(PROJECT_INCLUDE)/sh
    3035        $(INSTALL_CHANGE) -m 444 $(H_FILES) $(PROJECT_INCLUDE)/sh
     36
     37Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     38        cd $(top_builddir) \
     39         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

  • c/src/lib/libcpu/sh/sh7032/null/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH = @srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../../../..
     9subdir = c/src/lib/libcpu/sh/sh7032/null
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH = @srcdir@
    1217
    1318PGM=${ARCH}/null.rel
    … …  
    6065# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
    6166install:  all
     67
     68Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     69        cd $(top_builddir) \
     70         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

  • c/src/lib/libcpu/sh/sh7032/timer/Makefile.in

    r5906ac5 rd8ff793  
    55@SET_MAKE@
    66srcdir = @srcdir@
    7 VPATH=@srcdir@
    8 RTEMS_ROOT = @top_srcdir@
     7top_srcdir = @top_srcdir@
     8top_builddir = ../../../../../../..
     9subdir = c/src/lib/libcpu/sh/sh7032/timer
     10
     11INSTALL = @INSTALL@
     12
     13RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
    914PROJECT_ROOT = @PROJECT_ROOT@
    1015
    11 INSTALL = @INSTALL@
     16VPATH=@srcdir@
    1217
    1318PGM=${ARCH}/timer.rel
    … …  
    6166# libbsp/sh/BSP/Makefile
    6267install:  all
     68
     69Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
     70        cd $(top_builddir) \
     71         && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
Note: See TracChangeset for help on using the changeset viewer.